[1]李方义,李振,王黎明,等. 内燃机增材再制造修复技术综述[J]. 中国机械工程. 2019, 30(9):1119-1127.
LI Fangyi, LI Zhen, WANG Liming, et al. Review on ICE Remanufacture with Additive Repair Technology[J]. China Mechanical Engineering, 2019, 30(9):1119-1127.
[2]朱红梅,胡际鹏,李柏春,等. 铁基材料表面激光熔覆不锈钢涂层的研究进展[J]. 表面技术, 2020, 49(3):74-84.
ZHU Hongmei, HU Jipeng, LI Baichun ,et al. Research Progress of Laser Cladding Stainless Steel Coating on Fe-based Substrate[J]. Surface Technology, 2020, 49(3):74-84.
[3]黄怡晨. 激光熔覆喷嘴粉末汇聚特性及其与熔池相互作用研究[D].哈尔滨:哈尔滨工业大学, 2017.
HANG Yichen. Research on Convenience Properties of Powder in Coaxial Laser Cladding Nozzle and the Interaction with Melt Pool[D]. Harbin:Harbin Institute of Technology, 2017.
[4]TAMANNA N, CROUCH R, NAHER S. Progress in Numerical Simulation of the Laser Cladding Process[J]. Optics and Laser in Engineering, 2019, 122:151-163.
[5]BEDENKO D V, GULAIEV I P, GURIN A M, et al. Modelling of Gas-powder Transportation during Coaxial Laser Cladding[C]∥International Conference on the Methods of Aerophysical Research. Novosibirsk, 2018:23-24.
[6]FERREIRA E, DAL M, COLIN C, et al. Experimental and Numerical Analysis of Gas/Powder Flow for Different LMD Nozzles[J]. Metals, 2020, 10(5):667.
[7]POLYANSKIY T A, ZAITSEV A V, GULYAEV I P, et al. Numerical and Experimental Investigation of Two Phase Flow for Direct Metal Deposition[J]. Journal of Physics Conference Series, 2018,1109(1):012010.
[8]KOVALEV O. Comparative Analysis of Performance Characteristics of Nozzle Heads for Powder Transportation in a Laser Cladding and Direct Material Deposition[J]. Matec Web of Conferences, 2018, 224:01041.
[9]ZAITSEV A V, GULYAEV I P, POLYANSKIY T A, et al. Numerical and Experimental Study of Dispersed Flow in Laser Cladding[C]∥International Conference on the Methods of Aerophysical Research[J].AIP Conference Proceedings, 2018, 2027:030147.
[10]WIRTH F, WEGENER K. Simulation of the Multi-component Process Gas Flow for the Explanation of Oxidation during Laser Cladding[J]. Additive Manufacturing, 2018, 24:249-256.
[11]ZHANG J, YANG L, ZHANG W, et al. Numerical Simulation and Experimental Study for Aerodynamic Characteristics and Powder Transport Behavior of Novel Nozzle[J]. Optics and Lasers in Engineering, 2020,126(1):105873.
[12]李刚,张津超,石世宏,等. 开放环境下钛合金激光熔覆局部保护气体的质量分布[J]. 中国激光, 2019, 46(7):118-124.
LI Gang, ZHANG Jinchao, SHI SHihong, et al. Mass Distribution of Local Shielding Gas for Laser Cladding of Titanium Alloy in Open Environment[J]. Chinese Journal of Lasers, 2019, 46(7):118-124.
[13]GAO J L, WU C Z, LIANG X D, et al. Numerical Simulation and Experimental Investigation of the Influence of Process Parameters on Gas-powder Flow in Laser Metal Deposition[J]. Optics and Laser in Engineering, 2020, 125:106009.
[14]LIU H, HAO J B, YU G, et al. A Numerical Study on Metallic Powder Flow in Coaxial Laser Cladding[J]. Journal of Applied Fluid Mechanics, 2016, 9(5):2247-2256.
[15]MONTERO J, ROODRGUEZ , AMADO J M, et al. Inspection of Powder Flow during LMD Deposition by High Speed Imaging[J]. Physics Procedia, 2016, 83(1):1319-1328.
[16]席明哲,虞钢,张永忠,等. 同轴送粉激光成形中粉末与激光的相互作用[J]. 中国激光, 2005, 32(4):562-566.
XI Mingzhe, YU Gang, ZHANG Yongzhong, et al. Interaction of the Laser Beam and the Metal Powder Conveyed by Coaxial Powder Feeder[J]. Chinese Journal of Lasers, 2005, 32(4):562-566.
[17]彭如意,罗岚,刘勇,等. 同轴送粉器喷嘴研究进展[J]. 激光与光电子学进展, 2017,54(8):37-45.
PENG Ruyi, LUO Lan, LIU Yong, et al. Research Progress in Coaxial Powder Feeding Nozzles[J].Laser & Optoelectronics Progress, 2017,54(8):37-54.
[18]AL HAMAHMY M I, DEIAB Z. Review and Analysis of Heat Source Models for Additive Manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(1):1223–1238.
[19]张冬云,吴瑞,张晖峰,等. 激光金属熔覆成形过程中温度场演化的三维数值模拟[J]. 中国激光, 2015, 42(5):104-115.
ZHANG Dongyun, WU Rui, ZHANG Huifeng, et al. Numerical Simulation of Temperature Field Evolution in the Process of Laser Metal Deposition[J]. Chinese Journal of Lasers, 2015,42(5):104-155.
|