China Mechanical Engineering ›› 2021, Vol. 32 ›› Issue (07): 820-831.DOI: 10.3969/j.issn.1004-132X.2021.07.009
Previous Articles Next Articles
LI Fangyi1;QI Xiaoxia1;LI Yanle1;WANG Liming1;DU Jiyu1;XU Jingwei2;MENG Xiaoning2#br#
Online:
2021-04-10
Published:
2021-04-16
李方义1;戚小霞1;李燕乐1;王黎明1;杜际雨1;许京伟2;孟晓宁2
通讯作者:
李燕乐(通信作者),男,1989年生,副教授。研究方向为汽车零部件再制造、增材制造。E-mail:yanle.li@sdu.edu.cn。
作者简介:
李方义,男,1969年生,教授、博士研究生导师。研究方向为再制造理论方法和技术、产品全生命周期评价。发表论文120余篇。E-mail:lifangyi@sdu.edu.cn。
CLC Number:
LI Fangyi, QI Xiaoxia, LI Yanle, WANG Liming, DU Jiyu, XU Jingwei, MENG Xiaoning. Review on Repair Technologies for Key Part Remanufacturing of Shield Machines[J]. China Mechanical Engineering, 2021, 32(07): 820-831.
李方义, 戚小霞, 李燕乐, 王黎明, 杜际雨, 许京伟, 孟晓宁. 盾构机关键零部件再制造修复技术综述[J]. 中国机械工程, 2021, 32(07): 820-831.
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.cmemo.org.cn/EN/10.3969/j.issn.1004-132X.2021.07.009
[1]徐滨士, 张伟. 面向21世纪的绿色再制造[J]. 中国表面工程, 1999(4):1-4. XU Binshi, ZHANG Wei. Green Remanufacturing for the 21st Century[J]. China Surface Engineering, 1999(4):1-4. [2]李恩重, 史佩京, 徐滨士,等. 我国再制造政策法规分析与思考[J]. 机械工程学报, 2015, 51(19):117-123. LI Enzhong, SHI Peijing, XU Binshi, et al. Analysis of Policies and Regulations of China Remanufacturing[J]. Journal of Mechanical Engineering, 2015, 51(19):117-123. [3]徐滨士, 夏丹, 谭君洋,等. 中国智能再制造的现状与发展[J]. 中国表面工程, 2018, 31(5):1-13. XU Binshi, XIA Dan, TAN Junyang, et al. Status and Development of Intelligent Remanufacturing in China[J]. China Surface Engineering, 2018, 31(5):1-13. [4]张佳兴. 盾构机主驱动密封跑道再制造[J]. 机电工程技术, 2018, 47(9):170-173. ZHANG Jiaxing. Remanufacturing of the Main Driving Seal Runway of the Shield Machine[J]. Mechanical & Electrical Engineering Technology, 2018, 47(9):170-173. [5]马龙飞. 盾构机再制造实践与分析[J].建筑机械化,2020,41(5):67-70. MA Longfei. Practice and Analysis of Shield Machine Remanufacturing[J]. Construction Mechanization, 2020,41(5):67-70. [6]乔治. 盾构再制造研究与实施[J]. 中国设备工程, 2019(15):145-147. QIAO Zhi. Research and Implementation of Shield Remanufacture[J]. China Plant Engineering, 2019(15):145-147. [7]易新乾. 盾构/工程机械再制造推进中14个问题探讨[J]. 隧道建设, 2018, 38(7):1079-1086. YI Xinqian. Discussion on 14 Issues in Remanufacturing Process of Shield/Construction Machinery[J]. Tunnel Construction, 2018, 38(7):1079-1086. [8]李桐. 盾构机再制造工程[J]. 金属加工(冷加工), 2014(17):13-14. LI Tong. Shield Machine Remanufacturing Engineering[J]. Metal Working(Metal Cutting), 2014(17):13-14. [9]ZHANG Chunguang, QU Fuzheng, LI Guo, et al. Influence of Cutterhead System Structure on Load Distribution and Life of Main Bearing[J]. Journal of Vibroengineering, 2016, 18(7):4164-4177. [10]刘宏志. TBM主轴承大齿圈洞内修复方案及工艺流程[J]. 科技资讯, 2017, 15(6):112. LIU Hongzhi. TBM Main Bearing Big Tooth Ring Hole Repair Plan and Process Flow[J]. Science & Technology Information, 2017, 15(6):112. [11]陆豪杰. 盾构主轴承再制造技术应用[J]. 建筑机械化, 2017, 38(3):58-62. LU Haojie. Application of Remanufacturing Technology for Main Bearing of Shield Machine[J]. Construction Mechanization, 2017, 38(3):58-62. [12]张友功,吴伟才.盾构机主轴承检测与再制造分析[J].设备管理与维修,2019(23):43-46. ZHANG Yougong, WU Weicai. Detection and Remanufacture Analysis of Shield Machine Main Bearing[J]. Plant Maintenance Engineering, 2019(23):43-46. [13]乔路卫. 盾构机主轴承再制造案例分析[J]. 机电工程技术, 2019, 48(9):235-236. QIAO Luwei. Case Analysis of Remanufacturing of Main Bearing of Shield Machine[J]. Mechanical & Electrical Engineering Technology, 2019, 48(9):235-236. [14]李胜新. 盾构掘进中主轴承密封的修复方法[J]. 石油工程建设, 2007(5):65-66. LI Shengxin. Repair Method of Main Bearing Seal in Shield Tunneling[J]. Petroleum Engineering Construction, 2007(5):65-66. [15]缪楠. 土压平衡盾构主驱动密封滑道磨损处理[J]. 隧道建设, 2013, 33(11):977-981. MIAO Nan. Treatment Measures for Wearing of Main Drive Sealing Slide of EPB Shield[J]. Tunnel Construction, 2013, 33(11):977-981. [16]REN D J, SHEN S L, ARULRAJAH A, et al. Prediction Model of TBM Disc Cutter Wear during Tunnelling in Heterogeneous Ground[J]. Rock Mechanics and Rock Engineering, 2018,51:3599-3611. [17]蒋建敏, 赵学彬, 贺定勇,等. 北京地区盾构机刀具失效分析及再制造研究[J]. 中国表面工程, 2006,19(3):44-46. JIANG Jianmin, ZHAO Xuebin, HE Dingyong, et al. Failure Analysis and Reproducing of Shield Machines Cutter in Beijing Region[J].China Surface Engineering, 2006,19(3):44-46. [18]段保亮, 马怀祥. 盾构机典型刀具再制造中的关键技术研究[J]. 表面工程与再制造, 2019, 19(增刊1):27-33. DUAN Baoliang, MA Huaixiang. Research on Key Technologies in Typical Tool Remanufacturing of Shield Machine[J]. Surface Engineering & Remanufacturing, 2019, 19(S1):27-33. [19]刘卓. 盾构机刀盘再制造工艺流程及要点[J]. 工程机械与维修, 2019(3):100-101. LIU Zhuo. Process Flow and Key Points of Remanufacturing Cutter Head of Shield Machine[J]. Engineering Machinery & Maintenance, 2019(3):100-101. [20]李爱农, 杨翔, 李蓓,等. 盾构刀盘拆卸结构再制造设计及数值模拟[J]. 焊接技术, 2018, 47(9):143-148. LI Ainong, YANG Xiang, LI Bei, et al. Remanufacturing Design and Numerical Simulation of Shield Cutter Disassembly Structure[J]. Welding Technology, 2008, 47(9):143-148. [21]毛三华. 土压平衡盾构机单刃滚刀修复工艺[J]. 工程机械与维修, 2012(6):130-132. MAO Sanhua. Repair Technology of Single Edge Hob of Earth Pressure Balanced Shield Machine[J].Construction Machinery & Maintenance, 2012(6):130-132. [22]刘建琴, 贾玄彬, 郭伟, 等. 基于裂纹萌生的TBM刀盘地质匹配及失效研究[J]. 天津大学学报(自然科学与工程技术版), 2017, 50(11):1148-1153. LIU Jianqin, JIA Xuanbin, GUO Wei, et al. Research on TBM Cutter-head Geological Matching and Failure Based on Crack Initiation[J]. Journal of Tianjin University(Science and Technology), 2017, 50(11):1148-1153. [23]孙伟, 朱晔, 凌静秀, 等. 基于裂纹失效区域的分体式刀盘可靠性计算[J]. 东北大学学报(自然科学版), 2016, 37(8):1144-1148. SUN Wei, ZHU Ye, LING Jingxiu, et al. Split Cutter Head Reliability Calculation Based on Crack Failure Regions[J]. Journal of Northeastern University(Natural Science), 2016, 37(8):1144-1148. [24]TIAN Jiyu, HU Yong, ZHAO Hongwei, et al. The Indentation and Wear Performance of Hardfacing Layers on H13 Steel for Use in High Temperature Application[J]. AIP Advances, 2019,9:095304. [25]周奇才, 黄克, 赵炯,等. 基于改进型滑动窗主元分析的盾构液压系统故障诊断研究[J]. 中国机械工程, 2013, 24(5):638-643. ZHOU Qicai, HUANG Ke, ZHAO Jiong, et al. Research on Fault Diagnosis of Hydraulic System for Shield Machine Based on Improved Moving Windows Algorithm Principal Component Analysis[J]. China Mechanical Engineering, 2013, 24(5):638-643. [26]王红霞, 王盛, 刘强. 基于Kriging响应面法的盾构机行星架多目标优化[J]. 机械传动, 2014, 38(3):71-75. WANG Hongxia, WANG Sheng, LIU Qiang.Multi-objective Optimization for Planetary Carrier of Shield Machine Based on Kriging Response Surface Method[J]. Journal of Mechanical Transmission, 2014,38(3):71-75. [27]刘学, 赵海鸣. 盾构螺旋输送机的螺旋轴疲劳断裂问题研究[J]. 机械工程师, 2019(9):40-41. LIU Xue, ZHAO Haiming. Fatigue Crack Research on Spiral Shaft of Screw Conveyer in Shield Machine[J]. Mechanical Engineer, 2019(9):40-41. [28]LIU Xuanyu, ZHANG Kaiju. Earth Pressure Balance Control of Shield Tunneling Machine Based on Nonlinear Least Squares Support Vector Machine Model Predictive Control[J]. Measurement & Control, 2019, 52(1/2):3-10. [29]司丹, 林宋, 彭兴礼,等. 盾构机驱动外壳密封位特种修复技术对裂纹的控制研究[J]. 机械设计与制造, 2011(12):140-142. SI Dan, LIN Song, PENG Xingli, et al. Study on Crack Control of Special Repairing Technology for the Sealing of Shield Machine Driving Jacket[J]. Mechanical Design & Manufacturing, 2011(12):140-142. [30]朱胜, 周超极, 周克兵. 绿色增材再制造技术[J]. 中国机械工程, 2018, 29(21):2590-2593. ZHU Sheng, ZHOU Chaoji, ZHOU Kebing. Green Additive Remanufacturing Technology[J]. China Mechanical Engineering, 2008, 29(21):2590-2593. [31]李方义, 李振, 王黎明,等. 内燃机增材再制造修复技术综述[J]. 中国机械工程, 2019, 30(9):1119-1127. LI Fangyi, LI Zhen, WANG Liming, et al. Review on ICE Remanufacturing with Additive Repair Technology[J]. China Mechanical Engineering, 2019,30(9):1119-1127. [32]张坚, 邱斌, 赵龙志. 激光熔覆技术研究进展[J]. 热加工工艺, 2011, 40(8):116-119. ZHANG Jian, QIU Bin, ZHAO Longzhi. Latest Developments of Laser Cladding Technology[J]. Hot Working Technology, 2011, 40(8):116-119. [33]段松. 盾构机滚刀刀圈材料激光熔覆镍基硬质合金的研究[D]. 石家庄:石家庄铁道大学,2016. DUAN Song. Study of Nickel Based Carbide Coatings on Cutter Ring Material for TBM Hob by Laser Cladding[D]. Shijiazhuang:Shijiazhuang Tiedao University, 2016. [34]付琴. 激光熔覆高耐蚀耐磨纳米晶涂层的制备与性能研究[D]. 武汉:华中科技大学, 2015. FU Qin. Study on Properties of Nanocrystalline Coatings by Laser Cladding[D]. Wuhan:Huazhong University of Science and Technology, 2015. [35]ZESIG J,SCHDLICH N, GIEBELER L, et al. Microstructure and Abrasive Wear Behavior of a Novel FeCrMoVC Laser Cladding Alloy for High-performance Tool Steels[J]. Wear, 2017, 382/383:107-112. [36]SHI J, BAI S Q. Research on Gear Repairing Technology by Laser Cladding[J]. Key Engineering Materials, 2013,546:40-44. [37]ZHU L, WANG S H, PAN H C, et al. Research on Remanufacturing Strategy for 45 Steel Gear Using H13 Steel Powder Based on Laser Cladding Technology[J]. Journal of Manufacturing Processes, 2020, 49:344-354. [38]肖洁, 丁涛. 基于激光熔覆的采煤机高速轴耐蚀性能研究[J]. 激光杂志, 2020, 41(4):130-135. XIAO Jie, DING Tao. Study on High Speed Shaft Corrosion Resistance of Axle Based on Laser Cladding[J]. Laser Journal, 2020,41(4):130-135. [39]封慧,李剑峰,孙杰.曲轴轴颈损伤表面的激光熔覆再制造修复[J].中国激光,2014,41(8):86-91. FENG Hui, LI Jianfeng, SUN Jie. Study on Remanufacturing Repair of Damaged Crank Shaft Journal Surface by Laser Cladding[J]. Chinese Journal of Lasers,2014,41(8):86-91. [40]王义猛. 液压油缸活柱表面激光熔覆技术研究[J]. 热加工工艺, 2018, 47(18):137-140. WANG Yimeng. Study on Laser Cladding Technology on Surface of Hydraulic Cylinder Movable Column[J]. Hot Working Technology, 2018, 47(18):137-140. [41]CUI Zeqin, ZHEN Qin, PENG Dong, et al. Microstructure and Corrosion Properties of FeCoNiCrMn High Entropy Alloy Coatings Prepared by High Speed Laser Cladding and Ultrasonic Surface Mechanical Rolling Treatment[J]. Materials Letters, 2020, 259:126769. [42]郭卫,李凯凯,柴蓉霞,等. 27SiMn钢表面激光熔覆铁基合金组织和耐磨性分析[J].应用激光, 2018,38(3):351-357. GUO Wei, LI Kaikai, CHAI Rongxia, et al. Analysis of Microstructure and Wear Resistance of Fe-based Alloy on 27SiMn Steel Surface by Laser Cladding[J]. Applied Laser, 2018,38(3):351-357. [43]翟建华,刘志杰,张勇,等.内缸活塞杆的激光熔覆修复[J].激光与光电子学进展,2017,54(11):273-280. ZHAI Jianhua, LIU Zhijie,ZHANG Yong, et al. Laser Cladding Reparation of Inner Cylinder Piston Rods[J]. Laser & Optoelectronics Progress, 2017,54(11):273-280. [44]GALEDARI S A, MAHDAVI A, AZARMI F, et al. A Comprehensive Review of Corrosion Resistance of Thermally-sprayed and Thermally-diffused Protective Coatings on Steel Structures[J]. Journal of Thermal Spray Technology,2019, 28:645-677. [45]马宁. 高硬强韧WC涂层的设计及其在工程机械再制造中的应用[D]. 天津:天津大学,2014. MA Ning. Design of WC Coating with High Hardness, Strength and Toughness and Its Application in Remanufacturing of Construction Machinery[D].Tianjin:Tianjin University, 2014. [46]曹华军, 童少飞, 陈海峰,等. 基于热喷涂的轴类零件再制造工艺及其残余应力分析[J]. 中国机械工程, 2014, 25(24):3368-3372. CAO Huajun, TONG Shaofei, CHEN Haifeng, et al. Analysis of Remanufacturing Process and Residual Stress of Axis Parts Based on Thermal Spraying[J]. China Mechanical Engineering, 2014, 25(24):3368-3372. [47]郭永明. 表面工程应用实例 [例53] 电弧喷涂在煤矿液压支架立柱修复中的应用[J].中国表面工程, 2018, 31(2):2. GUO Yongming. Application Examples of Surface Engineering [Example 53] Application of Arc Spraying in Repairing Hydraulic Support Column in Coal Mine[J]. China Surface Engineering, 2018, 31(2):2. [48]张景河, 王群, 邓帮华,等. 超音速火焰喷涂WC-Cr3C2-M涂层性能及其在液压支架立柱上的应用研究[J]. 热喷涂技术, 2018, 10(3):27-32. ZHANG Jinghe, WANG Qun, DENG Banghua, et al. Properties and Application on the Hydraulic Support Plunger of WC-Cr3C2-M Coating Deposited by High Velocity Oxygen Fuel Spray Process[J]. Thermal Spray Technology, 2018, 10(3):27-32. [49]刘麟, 顾伯勤. 高温球阀喷涂Al2O3-TiO2和WC-Co涂层的耐磨粒磨损性能[J]. 南京工业大学学报(自然科学版), 2009, 31(5):5-8. LIU Lin, GU Boqin. Abrasive Resistance of Sprayed Al2O3-TiO2 and WC-Co Coatings on High Temperature Ball Valve[J]. Journal of Nanjing University of Technology(Natural Science Edition), 2009, 31(5):5-8. [50]赖允有, 邱联昌,杨凤根,等. 用于高压阀门新型WC-10Co-4Cr 涂层的研究[C]∥第十四届国际热喷涂研讨会.武汉, 2011:65-71. LAI Yunyou,QIU Lianchang, YANG Fenggen, et al. Study of New WC-10Co-4Cr Coatings Used for High Pressure Valve[C]∥14th International Symposium on Thermal Spraying (ITSS).Wuhan, 2011:65-71. [51]LU Haiyang, SHANG Jiantong, JIA Xiujie, et al. Erosion and Corrosion Behavior of Shrouded Plasma Sprayed Cr3C2-NiCr Coating[J]. Surface & Coatings Technology, 2020,388:125534. [52]LI Zhen, LI Yanle, LI Jianfeng, et al. Effect of NiCr Content on the Solid Particle Erosion Behavior of NiCr-Cr3C2 Coatings Deposited by Atmospheric Plasma Spraying[J]. Surface & Coatings Technology, 2020, 381:125144. [53]DU Jiyu, LI Fangyi, LI Yanle, et al. Influences of Plasma Arc Remelting on Microstructure and Service Performance of Cr3C2-NiCr/NiCrAl Composite Coating[J]. Surface & Coatings Technology, 2019,369:16-30. [54]邓楠, 董浩, 车洪艳,等. 冷喷涂制备金属涂层及其在增材制造应用中的研究进展[J].表面技术, 2020, 49(3):57-66. DENG Nan, DONG Hao, CHE Hongyan, et al. The Research Progress on Preparation of Metal Coatings by Cold Spraying and Its Application in Additive Manufacturing[J]. Surface Technology, 2020,49(3):57-66. [55]YIN S, CAVALIERE P, ALDWELL B, et al. Cold Spray Additive Manufacturing and Repair:Fundamentals and Applications[J].Additive Manufacturing, 2018, 21:628-650. [56]STOLTENHOFF T, ZIMMERMANN F, SURFACE P, et al. Coatings for Aluminum Aerospace Components Exposed to High Dynamic Stresses[R]. Ratingen:Praxair Surface Technologies GmbH, 2012. [57]WIDENER C A, CARTER M J, OZDEMIR O C, et al. Application of High-pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator[J].Journal of Thermal Spray Technology, 2015, 25(1/2):193-201. [58]王璐璐. 基于轴类部件磨损修复的冷喷涂涂层制备及性能研究[D].厦门:集美大学,2015. WANG Lulu. Preparation and Study on Cold Spraying Coating Based on Shaft Parts Repair[D].Xiamen:Jimei University, 2015. [59]丁紫阳,马宗彬,黎文强.冷焊技术在液压支架修复再制造的应用研究[J].煤矿机械,2017,38(3):127-128. DING Ziyang, MA Zongbin, LI Wenqiang. Application of Cold Welding Technology in Remanufacturing of Hydraulic Support[J]. Coal Mine Machinery, 2017,38(3):127-128. [60]徐庆钟, 李方义, 秦顺顺,等. 冷焊工艺参数对HT250表面修复层性能的影响[J]. 机械工程学报, 2013, 49(7):101-105. XU Qingzhong, LI Fangyi, QIN Shunshun, et al. Effect of Cold-welding Parameters on Properties of HT250 Surface Repaired Layer[J]. Journal of Mechanical Engineering, 2013, 49(7):101-105. |
[1] | LIU Dong, WANG Minghao, BI Cong, SHUI Shengcai, CONG Ming, DU Yu. Design of Wearable Rigid and Soft Combined Hand Rehabilitation Devices [J]. China Mechanical Engineering, 2021, 32(08): 930-937. |
[2] | KANG Shuang, CHEN Changzheng, ZHAO Siyu, LUO Yuanqing, KONG Xiangxi. Study on Infrared Image Enhancement of Wind Turbine Blades Based on Adaptive Differential Multiscale Morphology(ADMM) [J]. China Mechanical Engineering, 2021, 32(07): 786-792. |
[3] | LI Yongkang1,2;WANG Jun1;LIAN Zisheng1, 2. High-speed Friction and Sealing Characteristics of Step Seal under Mixed Lubrication Conditions [J]. China Mechanical Engineering, 2021, 32(05): 533-539. |
[4] | SONG Shouxu;YU Jiong. Timing Decision Method for Predecisional Remanufacturing of Backup Roll Considering Fatigue Damage [J]. China Mechanical Engineering, 2021, 32(05): 565-571. |
[5] | ZHANG Weihua, LI Quanfu, SONG Dongli. Thoughts on Health Management and Condition-based Maintenance of Rolling Stocks [J]. China Mechanical Engineering, 2021, 32(04): 379-389. |
[6] | ZHAO Baolin1,2;LI Bo1,2;XIA Rui1,2;WANG Xuewen1,2;WANG Yun3. Experimental Study of Bionic Wear Resistance Optimization for Middle Plates in Scraper Conveyors [J]. China Mechanical Engineering, 2020, 31(24): 3006-3015. |
[7] | XIE Dongfu1;LUO Yufeng1,2;SHI Zhixin1;LIU Yande2. Research on Cooperative Modes and Tipping Stability of Multiple Mobile Robots [J]. China Mechanical Engineering, 2020, 31(20): 2472-2485. |
[8] | CHENG Jiayuan;REN Tingzhi;ZHANG Zilong ;LIU Dawei ;JIN Xin. Multi-body Dynamics Analysis and Test Verification for Inertia Cone Crushers [J]. China Mechanical Engineering, 2020, 31(19): 2322-2331. |
[9] | DU Yanbin1;CAO Huajun2. Technology System of Individualized Redesign for In-service Machine Tools Based on Monitoring and Diagnosis [J]. China Mechanical Engineering, 2020, 31(05): 567-575. |
[10] | LIU Caijie;XU Zhitao;ZHANG Qin;ZHANG Libo;YAO Kun. Green Scheduling of Flexible Job Shops Based on NSGA-Ⅱ under TOU Power Price [J]. China Mechanical Engineering, 2020, 31(05): 576-585. |
[11] | JIANG Chen, QIU Haobo, GAO Liang, . Research Progressesin Reliability-based Design Optimization under Aleatory Uncertainties [J]. China Mechanical Engineering, 2020, 31(02): 190-205. |
[12] | KANG Xi, DAI Jiansheng, . Theoretical Difficulties and Research Progresses of Mechanism Reconfiguration in Mechanisms—Evolution Connotation, Furcation Principle, Design Synthesis and Application of Metamorphic Mechanisms [J]. China Mechanical Engineering, 2020, 31(01): 57-71. |
[13] | FU Yuming, ZHAO Huayang, ZHENG Lijuan, QI Tong. Research on Dissolution Mechanism of Multi-component Ceramic Phases in Laser Cladding Coatings [J]. China Mechanical Engineering, 2019, 30(23): 2884-2889,2897. |
[14] | DING Xiaohong;ZHANG Jun;ZHANG Heng. Multi-objective Design Optimization of Pad-iron Positions for Three-point Supporting T-shaped Bed Machine Tools [J]. China Mechanical Engineering, 2019, 30(21): 2615-2621. |
[15] | LI Biao1;SUN Jun2;ZHU Shaoyu2;FU Yangyang2;MIAO Enming3;LI Yunqiang4;ZHU Guixiang4. Lubrication Analysis of Plain Journal Bearings Considering Axial Motion of Journal [J]. China Mechanical Engineering, 2019, 30(18): 2150-2155,2163. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||