[1]李深亮, 乔思佳, 姜绍西,等. 航空发动机叶段类静子辊轧叶片加工工艺[J]. 航空制造技术, 2018, 61(15):38-47.
LI Shenliang, QIAO Sijia, JIANG Shaoxi, et al. Research on New Manufacturing Process of Stator Blade Segments of Aero-engine[J]. Aeronautical Manufacturing Technology, 2018, 61(15):38-47.
[2]赵升吨,赵承伟,邵中魁,等.现代叶片成形工艺的探讨[J].机床与液压,2012,40(21):167-170.
ZHAO Shengdun, ZHAO Chengwei, SHAO Zhongkui, et al. Discussion about the Modern Forming Process of Leaves[J]. Machine Tool & Hydraulics, 2012, 40(21):167-170.
[3]SEDIGHI M, MAHMOODI M. Pressure Distribution in Cold Rolling of Turbo-engine Thin Compressor Blades[J]. Materials and Manufacturing Processes, 2012, 27(4): 401-405.
[4]王辉,吴宝海,李小强.新一代商用航空发动机叶片的先进加工技术[J].航空制造技术,2014,57(20):26-31.
WANG Hui, WU Baohai, LI Xiaoqiang. Advanced Machining Technology of New Generation Commercial Aeroengine Blade[J]. Aeronautical Manufacturing Technology, 2014, 57(20):26-31.
[5]王渊彬,汪文虎,张艳,等.压气机叶片辊轧模具型腔快速建模技术[J].航空学报, 2014, 35(11): 3190-3198.
WANG Yuanbin, WANG Wenhu, ZHANG Yan, et al. Rapid Modeling Technology of Rolling Mold Cavity of Aero-engine Compressor Blade[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(11):3190-3198.
[6]靳淇超,汪文虎,蒋睿嵩,等.压气机叶片辊轧模具型腔前滑补偿方法[J].航空学报, 2017, 38(1): 420173.
JIN Qichao, WANG Wenhu, JIANG Ruisong, et al. Forward Slip Compensation Method for Designing Rolling Mold Cavity of Compressor Blade[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(1): 420173.
[7]靳淇超,汪文虎,蒋睿嵩,等.压气机叶片辊轧模具型腔回弹补偿方法研究[J].机械工程学报,2017,53(16):148-155.
JIN Qichao, WANG Wenhu, JIANG Ruisong, et al. Investigation on Springback Compensation Method for the Rolling Mold of Compressor Blade[J]. Journal of Mechanical Engineering, 2017, 53(16):148-155.
[8]JIN Q, WANG W, YAN W, et al. Springback and Forward Slip Compensation in Designing Roller Cavity Surfaces for Net-shape Rolling Compressor Blades[J]. Materials and Manufacturing Processes. 2017, 32(12):1442-1449.
[9]GAO J, FOLKES J, YILMAZ O, et al. Investigation of a 3D Non-contact Measurement Based Blade Repair Integration System[J]. Aircraft Engineering and Aerospace Technology, 2005, 77(1): 34-41.
[10]GAO J, FOLKES J, YILMAZ O, et al. An Integrated Adaptive Repair Solution for Complex Aerospace Components through Geometry Reconstruction[J]. The International Journal of Advanced Manufacturing Technology, 2008, 36(11/12): 1170-1179.
[11]YILMAZ O, GINDY N, GAO J. A Repair and Overhaul Methodology for Aeroengine Components[J]. Robotics and Computer-Integrated Manufacturing, 2010, 26(2): 190-201.
[12]LI Y, NI J. Constraints Based Nonrigid Registration for 2D Blade Profile Reconstruction in Reverse Engineering[J]. Journal of Computing and Information Science in Engineering, 2009, 9(3): 031005.
[13]RONG Y, XU J, SUN Y. A Surface Reconstruction Strategy Based on Deformable Template for Repairing Damaged Turbine Blades[J]. Proceedings of the Institution of Mechanical Engineers. Part G: Journal of Aerospace Engineering, 2014, 228(12): 2358-2370.
[14]WANG C. Integrated Aerodynamic Design and Analysis of Turbine Blades[J]. Advances in Engineering Software, 2014, 68: 9-18.
[15]张艳,汪文虎,解晓娜,等. 压气机辊轧叶片前后缘圆滑转接建模方法[J].计算机集成制造系统,2015,21(2):444-448.
ZHANG Yan, WANG Wenhu, XIE Xiaona, et al. Smooth Connection Modeling Method between Edge and Body of Compressor Roll-forming Blade[J]. Computer Integrated Manufacturing Systems, 2015, 21(2): 444-448.
[16]SEDERBERG T W, PARRY S R. Free-form Deformation of Solid Geometric Models[J]. ACM SIGGRAPH Computer Graphics 1986, 20(4): 151-160.
[17]LI L, JIAO J, SUN S, et al. Aerodynamic Shape Optimization of a Single Turbine Stage Based on Parameterized Free-form Deformation with Mapping Design Parameters[J]. Energy, 2014, 169: 444-455.
[18]闫国栋, 戴宁, 廖文和, 等. 基于最小能量法的修复体曲面局部变形算法[J]. 中国机械工程, 2012, 23(18): 2194-2199.
YAN Guodong, DAI Ning, LIAO Wenhe, et al. Surface Local Deformation of Restoration Based on Minimum Energy Method[J]. China Mechanical Engineering, 2012, 23(18): 2194-2199.
[19]JIANG R, WANG W, ZHANG D, et al. A Practical Sampling Method for Profile Measurement of Complex Blades[J]. Measurement, 2016, 81: 57-65.
[20]HOLLAND J H. Genetic Algorithms[J]. Scientific American, 1992, 267(1): 66-73. |