RUAN Dengfang1,2;CHEN Li2;GAO Zhenchao2. Effects of Shell Profile Modification of Engine Conrod Bearings on Lubrication Characteristics[J]. China Mechanical Engineering.
[1]陆际清,沈祖京,孔宪清,等.汽车发动机设计[M]. 北京:清华大学出版社,1992:223.
LU Jiqing, SHEN Zujing ,KONG Xianqing, et al. Automotive Engine Design [M]. Beijing: Tsinghua University Press, 1992: 223.
[2]TAYLOR C M. Automobile Engine Tribology-design Considerations for Efficiency and Durability[J]. Wear, 1998, 221:1-18.
[3]ALLMAIER H,PRIESTNER C, REICH F M, et al. Predicting Friction Reliably and Accurately in Journal Bearings: the Importance of Extensive Oil-models[J]. Tribology International, 2012, 48:93-101.
[4]COY R C. Practical Applications of Lubrication Models in Engine[J]. Tribology International, 1998, 31(10): 563-571.
[5]何芝先, 桂长林. 计入轴瓦变形的曲轴轴承系统动力学摩擦学耦合分析[J]. 振动与冲击,2008,27(10):139-143.
HE Zhixian, GUI Changlin. Coupling Analysis of Dynamics and Tribology of a Crankshaft-bearing System Considering Elastic Deformation of Bush[J].Journal of Vibration and Shock,2008,27(10):139-143.
[6]孙军,王震华,桂长林. 计入曲轴受载变形的粗糙表面曲轴轴承弹性流体动力润滑分析[J]. 机械工程学报,2009, 45(1):135-140.
SUN Jun,WANG Zhenhua,GUI Changlin. Elastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load and Roughness Surface[J].Journal of Mechanical Engineering, 2009,45(1): 135-140.
[7]PATIR N, CHENG H. An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication[J]. Transactions of the ASME, 1978, 100(1): 12-17.
[8]PATIR N, CHENG H. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces[J]. ASME Transactions Journal of Lubrication Technology, 1979, 101(2): 220-230.
[9]GREENWOOD J A, TRIPP J H. The Contact of Two Nominally Flat Rough Surface[J]. Proc. Instn. Mech. Engrs., 1971, 185(48): 625-633.