[1]ELISHAKOFF I,COLOMBI P.Combination of Probabilistic and Convex Models of Uncertainty When Scare Knowledge Is Present on Acoustic Excitation Parameters[J].Computer Methods in Applied Mechanics & Engineering,1993,104:187-209.
[2]姜潮,李文学,王彬,等.一种针对概率与非概率混合结构可靠性的敏感性分析方[J].中国机械工程,2013,24(19):2577-2583.
JIANG Chao,LI Wenxue,WANG Bin,et al.A Sensitivity Analysis Method for Probabilistic and Non-probabilistic Hybrid Structures[J]. China Mechanical Engineering,2013,24(19):2577-2583.
[3]American Institute of Aeronautics and Astronautics,AIAA-G-077-1998,Guide for the Verification and Validation of Computational Fluid Dynamics Simulations[S]. Reston:AIAA,1998.
[4]American Society of Mechanical Engineers.ASME V&V 10-2006,Guide for Verification and Validation in Computational Solid Mechanics[S].New York:ASME,2006.
[5]American Society of Mechanical Engineers.ASME V&V 10.1-2012,an Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics[S].New York:ASME,2012.
[6]OBERKAMPF W L,ROY C J.Verification and Validation in Scientific Computing[M].New York:Cambridge University Press,2010.
[7]XIONG Y,CHEN W,TSUI K,et al.A Better Understanding of Model Updating Strategies in Validating Engineering Models[J].Computer Methods in Applied Mechanics and Engineering,2009,198(15):1327-1337.
[8]KENNEDY M C,OHAGAN A. Bayesian Calibration of Computer Models[J]. Journal of the Royal Statistical Society Series B-statistical Methodology,2001,63(3):425-464.
[9]HILLS R G,DOWDING K J. Multivariate Approach to the Thermal Challenge Problem[J].Computer Methods in Applied Mechanics and Engineering,2008,197(29):2442-2456.
[10]BRANDYBERRY M D.Thermal Problem Solution Using a Surrogate Model Clustering Technique[J].Computer Methods in Applied Mechanics and Engineering,2008,197(29):2390-2407.
[11]LIU F,BAYARRI M J,BERGER J Q,et al.A Bayesian Analysis of the Thermal Challenge Problem[J].Computer Methods in Applied Mechanics and Engineering 2008,197(29/32):2121-2136.
[12]HASSELMAN T,YAP K,LIN C,et al.A Case Study in Model Improvement for Vehicle Crashworthiness Simulation[C]//23rd International Modal Analysis Conference.Orlando,2005:89-98.
[13]张保强,陈国平,郭勤涛.模型确认热传导挑战问题求解的贝叶斯方法[J].航空学报,2011,32(7):1202-1209.
ZHANG Baoqiang,CHEN Guoping,GUO Qintao.A Bayesian Method for Solving the Problem of Heat Conduction Challenge[J].Journal of Aeronautics,2011,32(7):1202-1209.
[14]何成,陈国平,何欢.径向基模型的不确定性模型区间修正与确认[J].机械工程学报,2013,49(11):128-134.
HE Cheng,CHEN Guoping,HE Huan.Interval Verfication and Validation of Uncertainty Model of Radial Basis Model[J]. Journal of Mechanical Engineering,2013,49(11):128-134.
[15]肖钊,韩旭,杨刚.基于区间技术的模型确认方法及应用[J].机械工程学报,2014,50(14):177-184.
XIAO Zhao,HAN Xu,YANG Gang.Model Validation and Its Application Based on Interval Techniques [J].Chinese Journal of Mechanical Engineering,2014,50(14):177-184.
[16]方圣恩,林友勤,夏樟华.考虑结构参数不确定性的随机模型修正方法[J].振动、测试与诊断,2014,34(5):832-837.
FANG Shengen,LIN Youqin,XIA Zhanghua.Considering the Uncertainty of Structural Parameters of Stochastic Model Verfication Method[J].Journal of Vibration Measurement and Diagnosis,2014,34 (5):832-837.
[17]姜东,费国庆,吴邵庆.基于区间分析的不确定性结构动力学模型修正方法[J].振动工程学报,2015,28(3):352-358.
JIANG Dong,FEI Guoqing,WU Shaoqing.A Verfication Method for Uncertainty Structural Dynamic Model Based on Interval Analysis[J].Journal of Vibration Engineering,2015,28(3):352-358.
[18]LIU Y,CHEN W,ARENDT P D,et al.Toward a Better Understanding of Model Validation Metrics[J].Journal of Mechanical Design,2011,133(7) :1-13.
[19]MOORE R E.Methods and Applications of Interval Analysis[M].London:Prentice-Hall Inc,1979.
[20]茆诗松,王静龙,濮晓龙.高等数理统计[M]. 北京:高等教育出版社,2006.
MAO Shisong,WANG Jinglong,PU Xiaolong.Advanced Mathematical Statistics[M].Beijing: Higher Education Press,2006.
[21]FERSON S,HAJAGOS J.Arithmetic with Uncertain Numbers:Rigorous and (often) Best Possible Answers[J]. Reliability Engineering & System Safety,2004,85(1):135-152.
[22]FERSON S,KREINOVICK V,GINZBURG L R,et al.Constructing Probability Boxes and Dempster-shafer Structures[R]. Livermore:Sandia National Laboratories,2003.
[23]Ferson S, Oberkampf W L,Ginzburg L.Model Validation and Predictive Capability for the Thermal Challenge Problem[J]. Computer Methods in Applied Mechanics and Engineering 2008,197:2408-2430.
[24]GOLDBERG D E.Genetic Algorithms in Search,Optimization and Machine Learning[M].New Jersey: Addison-Wesley,1989:19-89.
[25]DOWDING K J,PILCH M,HILLS R G,et al. Formulation of the Thermal Problem[J]. Computer Methods in Applied Mechanics and Engineering,2008,197(29/32):2385-2389.
[26]BRANDYBERRY M D.Thermal Problem Solution Using a Surrogate Model Clustering Technique[J].Computer Methods in Applied Mechanics and Engineering,2008,197(29/32):2390-2407.
[27]MCFARLAND J,MAHADEVAN S. Multivariate Significance Testing and Model Calibration under Uncertainty[J]. Computer Methods in Applied Mechanics and Engineering,2008,197(29/32):2467-2479.
[28]RUTHERFORD B M.Computational Modeling Issues and Methods for the“Regulatory Problem”in Engineering Solution to the Thermal Problem[J].Computer Methods in Applied Mechanics and Engineering,2008,197(29/32):2480-2489.