LIU Chao1,2;WANG Liandong1;LIU Heng1;GAO Yuan1;WANG Zhipeng1. Seamless Steel Tube with Wall Thickness Deviation in Pushing-pulling Necking[J]. China Mechanical Engineering.
[1]SADOK L,KUSIAK J,PACKO M.State of Strain in the Tube Sinking Process[J].Journal of Materials Processing Technology,1996,60(1/4):161-166.
[2]PENG Junyang,FU Yuan,CHEN Jingsong,et al.Experimental Investigation on Thickness Changes during Necking Process[J].Journal of Plasticity Engineering,2012,19(3):60-63.
[3]WANG Liandong,ZHAO Shiyan,GAO Pengfei,et al.Analysis of Buckling in Push-sinking and Its Influence Factor[J].Journal of Plasticity Engineering,2005,12(3):76-79.
[4]CHEN Guoqiang.Study on Half-sliding Hydroforming of Automobile Axle Housings[D].Qinhuangdao:Yanshan University,2014:89-91.
[5]HONG Chunteng,BING Yanteng.An Optiming Process Design for Sinking with the Thin-wall Cylindrical Cup[J].Applied Mechanics and Materials,2014,456:22-27.
[6]WANG Liandong,LIANG Chen,MA Lei,et al.The Bilateral Reverse Mandrel Reduction Die and Technology of Tube:China,201310191757.9[P].2015-05-13.
[7]SONG Xiliang.The Test Research of the Wall Thickness Changing of Seamless Tubes during Necking Process with Equal Length at Both Sides[J].Modern Manufacturing Engineering,2012,379(4):84-88.