Investigation on End Circumferential Wrinkles of Large Deformation Pushing Diameter-reducing Tubes with Wall Thickness Deviation
LIU Heng1,2;WANG Liandong1,2;TAN Qiying2;WANG Xiaodi3;SONG Xiliang2
1.Hebei Key Laboratory of Special Delivery Equipment,Yanshan University,Qinhuangdao,Hebei,066004
2.School of Vehicle and Energy,Yanshan University,Qinhuangdao,Hebei,066004
3.School of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei,066004
LIU Heng, WANG Liandong, TAN Qiying, WANG Xiaodi, SONG Xiliang. Investigation on End Circumferential Wrinkles of Large Deformation Pushing Diameter-reducing Tubes with Wall Thickness Deviation[J]. China Mechanical Engineering, 2021, 32(21): 2635-2645.
[1]CELENTANO D J, ROSALES D A, PEA J A. Simulation and Experimental Validation of Tube Sinking Drawing Processes[J]. Materials and Manufacturing Processes, 2011, 26(5):770-780.
[2]ALMEIDA B P P, ALVES M L, ROSA P A R, et al. Expansion and Reduction of Thin-walled Tubes Using a Die:Experimental and Theoretical Investigation[J]. International Journal of Machine Tools & Manufacture, 2006, 46:1643-1652.
[3]SALEHI J, REZAEIAN A, TOROGHINEJAD M R. Fabrication and Characterization of a Bimetallic Al/Cu Tube Using the Tube Sinking Process[J]. International Journal of Advanced Manufacturing Technology, 2018, 96(1/4):153-159.
[4]彭俊阳, 付渊, 王勇, 等. 缩径过程中的壁厚变化实验[J]. 塑性工程学报, 2012, 19(3):60-63.
PENG Junyang, FU Yuan, WANG Yong, et al. Experimental Investigation on Thickness Change during Necking Process[J]. Journal of Plasticity Engineering, 2012, 19(3):60-63.
[5]王连东, 赵石岩, 高鹏飞, 等. 管坯推压缩径端部翘曲机理及其影响因素分析[J]. 塑性工程学报, 2005, 12(3):76-79.
WANG Liandong, ZHAO Shiyan, GAO Pengfei, et al. Analysis of Buckling in Push-sinking and Its Influence Factor[J]. Journal of Plasticity Engineering, 2005, 12(3):76-79.
[6]刘恒, 王连东, 王晓迪, 等. 管坯大变形自由推压缩径残余应力的研究[J]. 中国机械工程, 2021, 32(11):1354-1360.
LIU Heng, WANG Liandong, WANG Xiaodi, et al. Study on the Residual Stress of Large Deformation Free Pushing Diameter-reducing Tube Blanks[J]. China Mechanical Engineering, 2021, 32(11):1354-1360.
[7]孙志超, 杨合. 管轴压成形失稳起皱力学过程的研究[J]. 机械工程学报, 2003, 39(6):110-113.
SUN Zhichao, YANG He. Research on Mechanical Model of Buckling in Tube Axial Compressive Forming Process[J]. Chinese Journal of Mechanical Engineering, 2003, 39(6):110-113.
[8]LIU G H, GUO Y Q, JIANG Z. Influence of Heating Models on Necking Deformation during Tube Extrusion Process[J]. Advanced Materials Research, 2011, (189/193):1778-1781.
[9]TENG H, TENG B. An Optiming Process Design for Sinking with the Thin-wall Cylindrical Cup[J]. Applied Mechanics and Materials, 2014, 456:22-27.
[10]刘超, 王连东, 刘恒, 等. 带壁厚偏差的无缝钢管推压-拉拔复合缩径[J]. 中国机械工程, 2018, 29(11):1375-1379.
LIU Chao, WANG Liandong, LIU Heng, et al. Seamless Steel Tube with Wall Thickness Deviation in Pushing-Pulling Necking[J]. China Mechanical Engineering, 2018, 29(11):1375-1379.
[11]高铁军, 王忠金, 李毅. 薄壁筒形件粘性介质外压缩径失稳起皱分析[J]. 材料科学与工艺, 2010, 18(4):489-493.
GAO Tiejun, WANG Zhongjin, LI Yi. Wrinkling and Instability Analysis of Thin-wall Cylindrical Parts in Viscous Medium Outer Pressure Necking[J]. Materials Science & Technology, 2010, 18(4):489-493.
[12]ZHAO C C, HAN Z J, DU B, et al. Wrinkling Prediction of Aluminum Alloy Tubes during Reduced Diameter Compression Forming[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106:65-75.
[13]张鑫, 赵长财, 杜冰, 等. 管材缩径起皱失稳数值模拟[J]. 中国有色金属学报, 2020, 30(8):1855-1865.
ZHANG Xin, ZHAO Changcai, DU Bing, et al. Numerical Simulation on Wrinkling Instability of Tube Outer Pressure Compression[J]. The Chinese Journal of Nonferrous Metals, 2020, 30(8):1855-1865.
[14]SHIRAYORI A, FUCHIZAWA S, ISHIGURE H, et al. Deformation Behavior of Tubes with Thickness Deviation in Circumferential Direction during Hydraulic Free Bulging[J]. Journal of Materials Processing Technology, 2003, 139(1/3):58-63.
[15]HE Z, WANG Z, LIN Y, et al. A Modified Marciniak-Kuczynski Model for Determining the Forming Limit of Thinwalled Tube Extruded with Initial Eccentricity[J]. International Journal of Mechanical Sciences, 2018, 151:715-723.
[16]王连东, 刘超, 刘恒, 等. 芯轴外径对大变形推压-拉拔复合缩径的影响[J]. 中国机械工程, 2018, 29(17):2131-2136.
WANG Liandong, LIU Chao, LIU Heng, et al. Effects of Mandrel Diameters on Large Deformation Pushing-Pulling Necking[J]. China Mechanical Engineering, 2018, 29(17):2131-2136.