[1]GOPALAKRISHNAN S H, SURESH K. A Formal Theory for Estimating Defeaturing-induced Engineering Analysis Errors[J]. Computer-Aided Design, 2007, 39: 60-68.
[2]LI Sansi, YANG Yingping, JIA Xinting, et al. The Impact and Compensation of Tilt Factors upon the Surface Measurement Error[J].Optik, 2016, 127:7367-7373.
[3]唐建国,曹魏娟,高曙明.面向CAE的简化模型误差评估与信息重用[J].中国机械工程,2012,23 (8):961-966.
TANG Jianguo, CAO Weijuan, GAO Shuming. CAE Oriented Error Evaluation and Information Reuse of Simplified Models[J]. China Mechanical Engineering, 2012, 23(8): 961-966.
[4]MIHAYLOVA P, BALDANZINI N, PIERINI M. Potential Error Factors in 1D Beam FE Modeling for the Early Stage Vehicle Design [J]. Finite Elements in Analysis and Design,2013,74:53-66.
[5]AHMAD A, ANDERSSON K, SELLGREN U, et al. A Stiffness Modeling Methodology for Simulation-driven Design of Haptic Devices[J]. Engineering with Computers, 2014, 30(1): 25-141.
[6]ALLEMANG R. Conference Proceedings of the Society for Experimental Mechanics Series[M]//Effects of Errors in Finite Element Models on Component Modal Tests. Berlin:Springer, 2014:299-312.
[7]乌春霞.汽车车门刚度的仿真分析与试验研究[D].长春:吉林大学,2007.
WU Chunxia. Simulation and Experiment Research of the Door Stiffness on Automotive[D]. Changchun: Jilin University,2007.
[8]高云凯,徐成,方剑光,等. 汽车车身覆盖件刚度的试验研究[J].汽车工程,2013, 35(12):1117-1122.
GAO Yunkai, XU Cheng, FANG Jianguang, et al. An Experimental Study on the Stiffness of Automotive Closures[J]. Automobile Engineering, 2013, 35(12): 1117-1122.
[9]陈永兴,吴晓燕,滕江川, 等. 基于误差传递建模的仿真可信性控制[J]. 计算机应用研究, 2013, 30(17): 1964-1966.
CHEN Yongxing, WU Xiaoyan, TENG Jiangchuan, et al. Simulation Credibility Control Based on Error Transfer Model[J]. Application Research of Computers, 2013, 30(17): 1964-1966.
[10]王洋.三坐标测量机采样预测方法及测头补偿技术研究[D].沈阳:东北大学,2014.
WANG Yang. Prediction Sampling Method and Probe Compensation Technology of CMM Research [D]. Shenyang: Northeastern University, 2014.
[11]林怡青,林秀君,彭美春,等.一种汽车ABS 试验台的等效惯量模型及误差分析[J].汽车技术,2005(9):24-27.
LIN Yiqing, LIN Xiujun, PENG Meichun, et al. An Equivalent Inertia Model of Automotive ABS Test Benches and Error Analysis[J]. Automobile Technology, 2005(9): 24-27. |