Fault Diagnosis Method of Gearbox Bearings Based on Generalized S-transform

Abstract

Abstract: The signals of gear box bearing faults usually were nonstationary and nonlinear. It might be more difficult to identify and extract in the strong background signals and noises. Based on the unique features and the timefrequency concentration of the generalized S-transform, a rolling bearing fault diagnosis method was proposed based on generalized S-transform. Window function in the generalized S-transform was discussed, and the influences of different parameters in adjusting the width of window function were analyzed, and the different energy distributions of bearing faults were discussed in timefrequency spectrum by generalized S-transform. Finally, the proposed method was validated by simulation analyses and the experiments of rolling bearings. The results show that the proposed method may accurately reveal the rolling bearing fault features frequency, and provides an effective method for gear box bearing fault diagnosis.

Key words: gear box, generalized S-transform;fault diagnosis, rolling bearing

摘要： 齿轮箱轴承故障冲击信号通常具有非平稳和非线性的特点，若在强背景信号与噪声中，更加难以识别和提取。鉴于广义S变换具有良好的自适应性和时频聚集性，提出了一种基于广义S变换的齿轮箱滚动轴承故障诊断方法。对广义S变换的时窗函数进行讨论，分析了不同参数对调节窗函数宽度的影响；讨论了不同程度的轴承故障在广义S变换时频谱图上的能量分布；通过仿真和实验验证了所提方法的可行性。结果表明，广义S变换方法能有效地反映不同轴承故障的特征频率，为齿轮箱的轴承故障诊断提供一种有效的方法。

关键词: 齿轮箱, 广义S变换, 故障诊断, 滚动轴承

CLC Number:

CHEN Huanguo, YI Yongyu, CHEN Wenhua, CHEN Pei, SHEN Jianyang. Fault Diagnosis Method of Gearbox Bearings Based on Generalized S-transform[J]. China Mechanical Engineering.

陈换过, 易永余, 陈文华, 陈培, 沈建洋. 基于广义S变换的齿轮箱轴承故障诊断方法[J]. 中国机械工程.

References

[1]钟秉林，黄仁.机械故障诊断学[M].北京：机械工业出版社，2006.
ZHONG Binglin，HUANG Ren. Introduction to Machine Fault Diagnosis[M]. Beijing：Mechanical Industry Press，2006.
[2]MALLAT S. A Theory for Multiresolution Signal Decomposition[J].The Wavelet Representation. IEEE Transactions on Pattern Analysis and Machine Intelligence，1989，11(7)：674-693.
[3]STOCKWELL R G，MANSINHA L, LOWE R P. Localization of the Complex Spectrum：The S Transform[J].IEEE Transactions on Signal Processing，1996，17(6)：998-1001.
[4]PINNEGAR C R，MANSINHA L. The S-transform with Windows of Arbitrary and Varying Shape[J].Geophysics，2003，68(1)：318-385.
[5]樊剑，吕越，张辉.基于S变换的地震波时频分析及人工调整[J].振动工程学报，2008，21(4)：381-386.
FAN Jian，LYU Yue，ZHANG Hui. Time-frequency Analysis and Artificial Simulation of Earthquake Ground Motions via S-transform[J].Journal of Vibration Engineering，2008，21(4)：381-386.
[6]DASH P K，PANIGRAHI B K. Power Quality Analysis Using S-transform[J].IEEE Transactions on Power Delivery，2003，18(2)：406-411.
[7]郭远晶，魏燕定，周晓军,等.S变换用于滚动轴承故障信号冲击特征提取[J].振动、测试与诊断，2014，34(5)：818-822.
GUO Yuanjing，WEI Yanding，ZHOU Xiaojun，et al. Research on Wireless Measurement System for Film Pressure of Water-lubricated Bearing [J].Journal of Vibration, Measurement & Diagnosis，2014，34(5)：818-822.
[8]朱明，李志农，何旭平.基于广义S变换的滚动轴承故障诊断方法研究[J].机床与液压，2015，43(1)：181-184.
ZHU Ming，LI Zhinong，HE Xuping. Fault Diagnosis Method of Rolling Bearing Based on Generalized S-transformation[J].Machine Tool & Hydraulics，2015，43(1)：181-184.
[9]YANG Wenxian，CHRISTIAN L，RICHARD C. S-transform and Its Contribution to Wind Turbine Condition[J].Renewable Energy，2014，62：137-146.
[10]ROOPA S, NARASIMHAN S V. S-transform Based on Analytic Discrete Cosine Transform for Time-frequency Analysis[J].Signal Processing，2014，105：207-215.
[11]Case Western Reserve University Bearing Data Center[EB/OL]. USA，Tex：Case Western Reserve University,2012[2016-03-01].http://csegroup.case.edu/bearingdatacenter/home.

[1]	HU Chao, LIU Zuo-Min. Research on Rolling Bearing’s Heathcote’s Stick-slip Model Based on Materials Compatibility [J]. J4, 201016, 21(16): 1969-1973.
[2]	QIN Guohao, ZHANG Kai, DING Kun, HUANG Fengfei, ZHENG Qing, DING Guofu, . Dynamic Wide Convolutional Residual Network for Bearing Fault Diagnosis Method [J]. China Mechanical Engineering, 2023, 34(18): 2212-2221.
[3]	QIAN Mengui, CHEN Tao, YU Yaoxiang, GUO Liang, GAO Hongli, LI Weilin, . A Method for Constructing Bearing HIs with IGI Weighting [J]. China Mechanical Engineering, 2023, 34(15): 1813-1819，1855.
[4]	DONG Shaojiang, ZHOU Cunfang, CHEN Lili, XU Xiangyang. Cross-domain Fault Diagnosis of Bearings Based on Discriminant Feature Extraction and Dual-domain Alignment [J]. China Mechanical Engineering, 2023, 34(15): 1856-1863.
[5]	ZHENG Jinde, CHEN Yan, TONG Jinyu, PAN Haiyang. RGCMvMRDE and Its Applications in Rolling Bearing Fault Diagnosis [J]. China Mechanical Engineering, 2023, 34(11): 1315-1325.
[6]	ZHANG Long, ZHANG Hao, WANG Chaobing, WANG Xiaobo, WEN Peitian, ZHAO Lijuan. Explicit Dynamics Driving Fault Diagnosis Method for Bearing Variable Conditions [J]. China Mechanical Engineering, 2023, 34(08): 982-992.
[7]	DONG Shaojiang, ZHU Peng, ZHU Sunke, LIU Lanhui, XING Bin, HU Xiaolin. Fault Diagnosis Method of Rolling Bearings Based on Simulation Data Drive and Domain Adaptation [J]. China Mechanical Engineering, 2023, 34(06): 694-702.
[8]	LI Ke, , YAN Han, GU Jiefei, , SU Lei, SU Wensheng, XUE Zhigang. Research on Multi-source Transfer Learning Bearing Fault Diagnosis Based on Shapelets Time Series [J]. China Mechanical Engineering, 2022, 33(24): 2990-2996,3006.
[9]	GUO Jiaxin, CHENG Junsheng, YANG Yu, . Fault Diagnosis Method of Rolling Bearings Based on Improved Multi-linear Principal Component Analysis Network [J]. China Mechanical Engineering, 2022, 33(02): 187-193,201.
[10]	TONG Jinyu, LUO Jin, ZHENG Jinde. Rolling Bearing Fault Diagnosis Method Based on Enhanced Deep Auto-encoder Network [J]. China Mechanical Engineering, 2021, 32(21): 2617-2624.
[11]	GUO Junchao, ZHEN Dong, MENG Zhaozong, SHI Zhanqun, GU Fengshou. Feature Extraction of Rolling Bearings Based on WAEEMD and MSB [J]. China Mechanical Engineering, 2021, 32(15): 1793-1800.
[12]	ZHENG Jinde, WANG Xinglong, PAN Haiyang, TONG Jinyu, LIU Qingyun. Rolling Bearing Fault Diagnosis Method Based on Adaptive Autogram [J]. China Mechanical Engineering, 2021, 32(07): 778-785，792.
[13]	DING Jiaxin ;WANG Zhenya ;YAO Ligang ;CAI Yongwu. Rolling Bearing Fault Diagnosis Based on GCMWPE and Parameter Optimization SVM [J]. China Mechanical Engineering, 2021, 32(02): 147-155.
[14]	YANG Luhang1;LI Baoqing1;WANG Ping2,3;WANG Jian2,3;YANG Yu1. Fault Diagnosis Method of Rolling Bearings Based on Probability Output Flexible Convex Hull [J]. China Mechanical Engineering, 2021, 32(01): 40-46.
[15]	WAN Shuting;PENG Bo;WANG Xiaolong. Early Fault Diagnosis Method of Rolling Bearings Based on DTD Transform-SCS Method [J]. China Mechanical Engineering, 2020, 31(23): 2829-2836.