[1]刘丽娟,吕明,武文革,等. 高速铣削钛合金Ti-6Al-4V切屑形态试验研究[J]. 机械工程学报,2015, 53(3): 196-205.
Liu Lijuan, Lü Ming, Wu Wenge, et al. Experimental Study on the Chip Morphology in High Speed Milling Ti-6Al-4V Alloy [J]. Journal of Mechanical Engineering, 2015, 53(3): 196-205.
[2]刘占强,艾兴,李甜甜,等. PCBN刀具加工TC4钛合金的切削加工性[J].山东大学学报(工学版),2009,39(1): 77-83.
Liu Zhanqiang, Ai Xing, Li Tiantian, et al. Machinability Analysis of Ti-6Al-4V Alloy with PCBN Tools in Turning Operations[J]. Journal of Shandong University(Engineering Science), 2009, 39(1): 77-83.
[3]陈五一,袁跃峰. 钛合金切削加工技术研究进展[J]. 航空制造技术, 2010(15): 26-30.
Chen Wuyi, Yuan Yuefeng. Research Development of Cutting Technology for Titanium Alloy [J]. Aeronautical Manufacturing Technology, 2010(15):26-30.
[4]吴雪峰,王扬. 激光加热辅助切削技术及研究进展[J]. 哈尔滨理工大学学报,2012, 17(4): 34-45.
Wu Xuefeng, Wang Yang. The Technology and Development of Laser Assisted Machining [J]. Journal of Harbin University of Science and Technology,2012,17(4): 34-45.
[5]Sun S, Brandt M,Dargush M S. Thermally Enhanc-ed Machining of Hard-to-machining Materials—a Review [J]. International Journal of Machine Tools & Manufacture, 2010, 50: 663-680.
[6]Dandekar C R, Shin Y C, Barnes J. Machinability Improvement of Titanium Alloy (Ti-6Al-4V) via LAM and Hybrid Machining[J]. International Journal of Machine Tools and Manufacture, 2010, 50(2): 174-182.
[7]Sun S, Brandt M, Dargush M S. The Effect of a Laser Beam on Chip Formation during Machining of Ti6Al4V Alloy[J]. Metallurgical and Materials Transactions A, 2010, 41A: 1573-1581.
[8]Ginta T L, Amin A K M N, Lajis M A, et al. Improved Tool Life in End Milling Ti-6Al-4V through Workpiece Preheating[J]. European Journal of Scientific Research, 2009, 27: 384-391.
[9]Lacalle L N L, Sanchez J A, Lamikiz A, et al. Plasma Assisted Milling of Heat-resistant Superalloys [J]. Journal of Manufacturing Science and Engineering, 2004, 126: 274-285.
[10]Bermingham M J, Palanisamy S, Dargush M S. Understanding the Tool Wear Mechanism during Thermally Assisted Machining Ti-6Al-4V [J]. International Journal of Machine Tools & Manufacture, 2012, 62: 76-87.
[11]Rahman R A, Sun S, Wang G, et al. An Investigation of Cutting Forces and Cutting Temperatures during Laser-assisted Machining of the Ti-6Cr-5Mo-5V-4Al Beta Titanium Alloy [J]. International Journal of Machine Tools & Manufacture, 2012, 63: 58-69.
[12]Sun S, Brandt M, Banes J E, et al. Experimental Investigation of Cutting Forces and Tool Wear during Laser-assisted Milling of Ti-6Al-4V-alloy [J]. Journal of Engineering Manufacture, 2011, 225: 1512-1527.
|