Research on Axial Cushing Behaviors of Inner Stiffened Hat-section Structure

Abstract

Abstract:

Dynamic axial compression simulation and drop-weight tests were carried out to study the crushing behaviors of inner stiffened hat section structure. First, the influences of inner stiffening on the hat-section structure were analyzed in theory; then, according to simulation results and experimental verification, the crushing behaviors of the inner stiffened hat-sections structure were analyzed. It is found that inner stiffening can greatly increase the energy absorption abilities of the hat-section structure, it is good for failure phenomena, stability and lightweight.

Key words: inner stiffening, hat-section structure, cushing behavior, lightweight

摘要：

通过仿真和落锤试验研究了内部加强帽形结构动态压溃时的吸能特性。首先，从理论上分析内部加强对帽形结构吸能特性的影响；然后，根据仿真结果，对内部加强帽型结构的轴向吸能特性进行了分析，并与无内部加强帽形结构进行了对比；最后进行了试验验证。结果表明：通过改变加强结构，帽形结构的轴向压缩稳定性和吸能特性有了很大的提高，且失效现象得到改善，还有利于结构的轻量化。

关键词: 内部加强, 帽形结构, 吸能特性, 轻量化

CLC Number:

U463.83

Mo Yimin, Su Dong, Shi Zhihua, Xu Min. Research on Axial Cushing Behaviors of Inner Stiffened Hat-section Structure[J]. China Mechanical Engineering, 2016, 27(05): 704-709.

莫易敏, 苏东, 石志华, 徐敏. 内部加强帽形结构轴向压缩吸能特性研究[J]. 中国机械工程, 2016, 27(05): 704-709.

References

[1]刘世龄. 加强板的弯矩函数列式[J]. 计算力学学报, 1999, 16(1)：8-17.

Liu Shilin. Moment Function Formulation of Stiffened Plates[J]. Chinese Journal of Computational Mechanics, 1999, 16(1):8-17.

[2]高元明. 单帽型与双帽型薄壁梁塑性变形特性的简化方法研究[D]. 长春：吉林大学, 2011.

[3]杨笠, 杨延鹏. 微型客车正面耐撞性的结构优化研究[J]. 汽车工业研究, 2014(9):54-57.

Yang Li, Yang Yanpeng. Structural Optimization of Frontal Impact of a Minibus[J]. Auto Industry Research, 2014(9):54-57.

[4]余跃, 周鸿波, 童水光,等. 一种薄壁梁加强结构及其动态抗弯性能分析[J]. 机械科学与技术, 2011, 28(3):80-84.

Yu Yue, Zhou Hongbo, Tong Shuiguang,et al. A Strengthen Structure of Thin-walled Beams and Analysis of Its Dynamic Bending Performance[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 28(3):80-84.

[5]Zarei H R, Kroger M. Bending Behavior of Empty and Form-filled Beams: Structural Optimization[J]. Int. J. Impact. Engng., 2008,35(6)：521-529.

[6]Abramowicz W. Simplified Crushing Analysis of Thin-walled Columns and Beams[J]. Rozprawy Inzynierskie, 1981, 29(1)：5-26.

[7]Wierzbicki T, Abramowicz W. On the Crushing Mechanics of Thin Walled Structures[J]. Journal of Applied Mechanics, 1983, 50(4):727-734.

[8]Abramowicz W, Jones N. Dynamic Axial Crushing of Square Tubes[J]. International Journal of Impact Engineering, 1984, 2(2)：179-208.

[9]Abramowicz W, Wierzbicki T. Axial Crushing of Multi-corner Sheet Metal Columns[J]. Journal of Applied Mechanics, 1989, 56(1)：113-120.

[10]White D, Jonse N, Abramowicz W. A Theoretical Analysis for the Quasi-static Axial Crushing of Top-hat and Double-hat Thin-walled Sections[J]. International Journal of Mechanical Sciences, 1999, 41(2)：209-233.

[11]吴晓杰, 胡宏勋, 刘学军,等. 薄壁梁轴向压溃力的影响参数[J]. 机械设计与研究, 2012, 28(1)：42-45.

Wu Xiaojie, Hu Hongxun, Liu Xuejun, et al. Study of Design Parameters Influencing the Axial Folding Force of Thin-welled Columns Based on VCS Models[J]. Machine Design and Research, 2012, 28(1)：42-45.

[12]余同希, 卢国兴. 材料与结构的能量吸收[M]. 北京：化学工业出版社, 2006.

[13]White M D, Jones N. Experimental Quasi-static Axial Crushing of Top-hat and Double-hat Thin-walled Sections[J]. International Journal of Mechanical Sciences, 1999, 41(2):178-208.

[14]解跃青, 方瑞华, 雷雨成. 基于碰撞数值模拟的汽车纵梁焊点布置方法[J]. 焊接学报, 2003, 24(1)：73-77.

Xie Yueqing, Fang Ruihua, Lei Yucheng. Distribution Method of Welding Spot on Automobile Girder Using Crash Simulation[J]. Transactions of the China Welding Institution, 2003, 24(1)：73-76.

[15]Wu Xueyun, Xia Yong, Zhou Qing. Influence of Flange Location on Axial Deformation Stability of Double-hat Structure[J]. Journal of Beijing Institute of Technology, 2012, 21(1):41-49.