Previous Articles Next Articles
HUA Lin1,2,3;WEI Pengfei1,2,3;HU Zhili1,2,3
Online:
2020-11-25
Published:
2020-11-27
华林1,2,3;魏鹏飞1,2,3;胡志力1,2,3
基金资助:
CLC Number:
HUA Lin, WEI Pengfei, HU Zhili, . Green and Intelligent Forming Technology and Its Applications for High Strength Lightweight Materials[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.22.013.
华林, 魏鹏飞, 胡志力, . [材料绿色成形技术]高强轻质材料绿色智能成形技术与应用[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.22.013.
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.cmemo.org.cn/EN/10.3969/j.issn.1004-132X.2020.22.013
[1]SCHNEIDER R, GRANT R J, SCHLOSSER J M, et al. An Investigation of the Deep Drawing Beha-vior of Automotive Aluminum Alloys at Very Low Temperatures[J]. Metallurgical and Materials Transactions A, 2019, 51:1123-1133. [2]PANDYA K S, ROTH C C, MOHR D. Strain Rate and Temperature Dependent Fracture of Aluminum Alloy 7075:Experiments and Neural Network Mo-deling[J]. International Journal of Plasticity, 2020, 51:102788-102839. [3]NAKAGAWA Y, MORI K I, SUZUKI Y, et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts[J]. Materials & Design, 2020, 192:108704-108715. [4]AVUOLU O, AVUOLU O, YLMAZOLU A G, et al. Microstructural Features and Mechanical Properties of 22MnB5 Hot Stamping Steel in Different Heat Treatment Conditions[J]. Journal of Materials Research and Technology, 2020, 9(5):10901-10908. [5]LI Huanhuan, HU Zhili, HUA Lin, et al. Optimization of Hot Forming-quenching Integrated Process Parameters for Complex Aluminum Alloy Automotive Components[J]. Rare Metal Materials and Engineering, 2019, 48(4):1029-1035. [6]ZHANG Wenpei, HU Zhili, LI Huanhuan, et al. Experimental and Numerical Investigation on Springback of Automotive Aluminum Alloy Sheet[J]. Rare Metal Materials and Engineering, 2019, 48(7):2130-2137. [7]LI Huanhuan, HU Zhili, HUA Lin, et al. Influence of Thermal Deformation Parameters on Mechanical Properties and Microstructure Evolution of AA7075 Aluminum Alloy during Hot Stamping-Quenching Process[J]. JOM, 2019, 71(12):4778-4788. [8]LEONG W D, LAM H L, NG W P Q, et al. Lean and Green Manufacturing—a Review on Its Applications and Impacts[J]. Process Integration and Optimization for Sustainability, 2019, 3:5-23. [9]曹华军,李洪丞,曾丹,等.绿色制造研究现状及未来发展策略[J].中国机械工程, 2020, 31(2):135-144. CAO Huajun, LI Hongcheng, ZENG Dan, et al. The State-of-art and Future Development Strategies of Green Manufacturing[J]. China Mechanical Engineering, 2020, 31(2):135-144. [10]XU Zhichao, LIU Yanxiong, HUA Lin, et al. Energy Analysis and Optimization of Main Hydraulic System in 10 000 kN Fine Blanking Press with Simulation and Experimental Methods[J]. Energy Conversion and Management, 2019, 181:143-158. [11]TAO Wenjin, LAI Zehao, LEU M C, et al. A Self-aware and Active-guiding Training & Assistant System for Worker-centered Intelligent Manufacturing[J]. Manufacturing Letters, 2019, 21:45-49. [12]WANG Lihui. From Intelligence Science to Intelligent Manufacturing[J]. Engineering, 2019, 5(4):595-812. [13]KUMAR S P L. State of the Art-intense Review on Artificial Intelligence Systems Application in Process Planning and Manufacturing[J]. Engineering Applications of Artificial Intelligence, 2017, 65:294-329. [14]JUNG I D, SHIN D S, KIM D, et al. Artificial Intelligence for the Prediction of Tensile Properties by Using Microstructural Parameters in High Strength Steels[J]. Materialia, 2020, 11:100699-100739. [15]WANG A, ELFAKIR O, LIU J, et al. Multi-objective Finite Element Simulations of a Sheet Metal-forming Process via a Cloud-based Platform[J]. International Journal of Advanced Manufacturing Technology, 2018, 100:2753-2765. [16]LIAO S H. Expert System Methodologies and Applications: a Decade Review from 1995 to 2004[J]. Expert Systems with Application, 2005, 28(1):93-103. [17]JIN Z, LUO S, FANG X D. KBS-aided Design of Tube Bending Processes[J]. Engineering Applications of Artificial Intelligence, 2001, 14(5):599-606. [18]NARANJE V, KUMAR S. A Knowledge-based Systemfor Strip-layout Design for Progressive Deep Drawing Dies[J]. International Journal of Computer Applications in Technology, 2013, 48(3):222-234. [19]周杰,阳德森,李路,等.基于可控拉深筋的高强度板拉深性能优化及预测[J].同济大学学报(自然科学版), 2010, 38(12):1796-1801. ZHOU Jie, YANG Desen, LI Lu, et al. Formability Improvement and Prediction of High Strength Steel Based on Controllable Drawbead[J]. Journal of Tongji University(Natural Science), 2010, 38(12):1796-1801. [20]MA Wenyu, YANG Jianwei, ZHANG jun, et al. Analysis and Multi-objective Optimization on the Stamping of High Strength Steel[C]∥ Atlantis Highlights in Intelligent Systems. Beijing, 2018:218-220. [21]谢晖, 袁志鹏, 王诗恩,等. 基于KBE的B柱全流程冲压工艺设计及系统开发[J]. 热加工工艺, 2016,45(13):133-138. XIE Hui, YUAN Zhipeng, WANG Shien, et al. Design and System Development of Whole Flow Path Stamping Process for B-pillar Based on KBE[J]. Hot Working Technology, 2016,45(13):133-138. [22]左哲. 典型车身超高强钢结构件冷冲压工艺智能设计系统开发[D]. 武汉:武汉理工大学, 2020. ZUO Zhe. Development of Intelligent Design System for Cold Stamping Process of Typical High-strength Steel Structural Parts[D]. Wuhan:Wuhan University of Technology, 2020. [23]REN Shengle, LAI Yinan, WU Guangfei, et al. Intelligent Prediction of Process Parameters for Cold Bending[J]. Advanced Materials Research, 2011, 154/155:74-78. [24]ZHAO Jun, WANG Fengquin. Parameter Identification by Neural Network for Intelligent Deep Drawing of Axisymmetric Workpieces[J]. Journal of Materials Processing Technology, 2005, 166(3):387-391. [25]段嘉鑫. 3A21铝合金微波天线反射面冲压成形回弹分析及控制[D]. 武汉:武汉理工大学, 2020. DUAN Jiaxin. Springback Analysis and Control of A3A21 Aluminum Alloy Microwave Antenna Reflective Surface Stamping[D]. Wuhan:Wuhan University of Technology, 2020. [26]LI Huanhuan, HU Zhili, HU Wenzhi, et al. Forming Quality Control of an AA5182-O Aluminum Alloy Engine Hood Inner Panel[J]. JOM, 2019, 71(5):1687-1695. [27]WANG Ailing, LIU Jun, GAO Haoxiang, et al. Hot Stamping of AA6082 Tailor Welded Blanks:Experiments and Knowledge Based Cloud FE (KBC-FE) Simulation[J]. Journal of Materials Processing Technology, 2017, 250:228-238. [28]PETRI H, DUY P, YUQIUGE H. Cloud Manufacturing-scheduling as a Service for Sheet Metal Manufacturing[J]. Computers & Operations Research, 2019, 110:208-219. [29]BULLING A, BLANKE U, SCHIELE B. A Tutorial on Human Activity Recognition Using Body-worn Inertial Sensors[J]. ACM Computing Surveys, 2014, 46(3):1-33. [30]CHENG Guojian, LIU Liting, QIANG Xinjian, et al. Industry 4.0 Development and Application of Intelligent Manufacturing[C]∥ IEEE International Conference on Information System & Artificial Intelligence. Hong Kong, 2016:407-410. [31]WANG L, AN X Y, ZHU B, et al. Research on Intelligent Process and Production Method of Hot Stamping[C]∥ Advanced High Strength Steel and Press Hardening. Xian, 2017:486-491. [32]HUANG Wenjiang, MARTIN P, ZHUANG Houlong. Machine-learning Phase Prediction of High-entropy Alloys[J]. Acta Materialia, 2019, 169:225-236. [33]MEREDIG B, WOLVERTON C. A Hybrid Computational-experimental Approach for Automated Crystal Structure Solution[J]. Nature Materials, 2013, 12(2):123-127. [34]CHOKSHI P, DASHWOOD R J, HUGHES D J. Artificial Neural Network(ANN) Based Microstructural Prediction Model for 22MnB5 Boron Steel during Tailored Hotstamping[J]. Computers & Structures, 2017, 190:162-172. [35]ZHOU Jing, WANG Baoyu, HUANG Mingdong, et al. Effect of Hot Stamping Parameters on the Mechanical Properties and Microstructure of Cold-rolled 22MnB5 Steel Strips[J]. International Journal of Minerals, Metallurgy and Materials, 2014(6):544-555. [36]MU Yanhong, WANG Baoyu, ZHOU Jing, et al. Influences of Hot Stamping Parameters on Mechanical Properties and Microstructure of 30MnB5 and 22MnB5 Quenched in Flat Die[J]. Journal of Central South University, 2018, 25(4):736-746. [37]刘鹏,龙曲波,尤宝卿,等.超高强度钢板热成形软区关键技术的研发[J].锻造与冲压, 2019(16):29-33. LIU Peng, LONG Qubo, YOU Baoqing, et al. Research and Development of Key Technology of Ultra High Strength Steel Sheet with Hot Forming Soft Zone[J]. Forging & Metal Forming, 2019(16):29-33. [38]SHEN Yuhan, SONG Yanli, HUA Lin, et al. Influence of Plastic Deformation on Martensitic Transformation during Hot Stamping of Complex Structure Auto Parts[J]. Journal of Materials Engineering & Performance, 2017, 26(4):1830-1838. [39]王礼良,蔡昭恒,孙雨豪,等. 一种以数据为导向制造轻量化薄壁钣金零件的方法: CN 110465573A[P]. 2019-11-19. WANG Liliang, CAI Zhaoheng, SUN Yuhao, et al. A Data-oriented Method for Manufacturing Lightweight Sheet Metal Parts:CN 110465573A[P]. 2019-11-19. [40]NAKAGAWA Y , MORI K I , SUZUKIY , et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts[J]. Materials & Design, 2020, 192:108704-108715. [41]HUA Lin, MENG Fanzhi, SONG Yanli, et al. A Constitutive Model of 6111-T4 Aluminum Alloy Sheet Based on the Warm Tensile Test[J]. Journal of Materials Engineering and Performance, 2014, 23(3):1107-1113. [42]LAN Jian, SHEN Xuejun, LIU Juan, et al. Strengthening Mechanisms of 2A14 Aluminum Alloy with Cold Deformation Prior to Artificial Aging[J]. Materials Science and Engineering:A, 2019, 745:517-535. [43]ZHOU Pu, SONG Yanli, HUA Lin, et al. Using Novel Strain Aging Kinetics Models to Determine the Effect of Solution Temperature on Critical Strain of Al-Zn-Mg-Cu Alloy[J]. Journal of Alloys and Compounds, 2020, 835:155647-155664. [44]李欢欢. 7075铝合金车身构件快速热冲压形性演变规律及控制研究[D]. 武汉:武汉理工大学, 2020. LI Huanhuan. Study on the Formability and Mechanical Properties Evolution and Control for PAHF of 7075 Aluminum Alloy Parts[D]. Wuhan:Wuhan University of Technology, 2020. [45]ZHANG Wenpei, LI Huanhuan, HU Zhili, et al. Investigation on the Deformation Behavior and Post-formed Microstructure/Properties of AA7075-T6 Alloy under Pre-hardened Hot Forming Process[J]. Materials Science and Engineering A,2020, 792:139749-139760. [46]LUAN X , ZHANG Q L , FAKIR O E , et al. Uniform:a Pilot Production Line for Hot/Warm Sheet Metal Forming Integrated in a Cloud Based SMARTFORMING Platform[C]∥ International Conference on Advanced High Strength Steel & Press Hardening. Xian, 2016, 492-497. [47]WANG Ailing, ZHENG Yang, LIU Jun, et al. Knowledge Based Cloud FE Simulation a Multi-objective FEA System for Advanced FE Simulation of Hot Stamping Process[C]∥ International Conference & Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes. Bristol, 2016, 426-430. [48]WANG Liang, ZHU Bin, WANG Qiang, et al.Modeling of Hot Stamping Process Procedure Based on Finite State Machine(FSM)[J]. The International Journal of Advanced Manufacturing Technology, 2016, 89, 857-868. [49]王梁,苏志同,安兴运,等.热冲压生产中的长周期智能控制[J].锻压技术,2020,45(7):128-132. WANG Liang, SU Zhitong, AN Xingyun, et al. Long-period Intelligent Control in Hot Stamping Production[J]. Forging & Stamping Technology, 2020,45(7):128-132. [50]宋燕利,华林,戴定国.一种基于急动度的伺服冲压速度控制方法:CN 106739128A [P]. 2017-05-31. SONG Yanli, HUA Lin, DAI Dingguo. A Servo Speed Control Method Based on Jerk:CN 106739128A [P]. 2017-05-31. [51]戴定国. 高强铝合金车身构件伺服热冲压工艺与性能调控[D]. 武汉:武汉理工大学, 2018. DAI Dingguo. Servo Hot Stamping Process and Property Regulation of High Strength Aluminum Alloy Automotive Parts[D]. Wuhan:Wuhan University of Technology, 2018. |
[1] | HU Jian1;CHEN Zezhong1;LIU Tao2;YANG Jinhua3. Simulation and Tests on Hot Forming Process Optimization for Door Anti-collision Beams [J]. China Mechanical Engineering, 2021, 32(01): 92-100. |
[2] | ZHAN Mei, LEI Yudong, , ZHENG Zebang, . Status and Development Tendency of Integrated Computational Materials Engineering in Precision Plastic Forming [J]. China Mechanical Engineering, 2020, 31(22): 2663-2677. |
[3] | LI Ming, DAI Peipei, CHANG Zhidong, CHEN Jun, . Springback Control and Compensation of Incremental Forming for Sheet Metal Parts with Open Geometric Feature [J]. China Mechanical Engineering, 2020, 31(22): 2723-2727. |
[4] | YANG Jun1;YANG Yunsong1;LI Wei1;XIAO Yunya2;ZHOU Zhixiong1. Theoretical Analyses and Experimental Studies for Riveting and Assembly Processes of Automotive Hub Bearing Units [J]. China Mechanical Engineering, 2017, 28(24): 2949-2956. |
[5] | BI Jiang, , ZHAO Changcai, DU Bing, CHEN Xiaohua, DONG Guojiang. Research on Bulging Technology of AA6061 Aluminum Alloy Tubes with Square Cross Sections [J]. China Mechanical Engineering, 2017, 28(12): 1491-1498. |
[6] | XUE Kemin, SUN Dazhi, LI Ping, GONG Zitianzong. Hot Stamping Forming Processes and Experiments of 22MnB5 Ultra-high Strength Steels [J]. China Mechanical Engineering, 2017, 28(12): 1498-1503,1511. |
[7] | CUI Junjia, HU Ming, LI Guangyao, . Establishment and Applications of Thermal Forming Limit Margin Field Graph for Automobile Components [J]. China Mechanical Engineering, 2017, 28(03): 358-365. |
[8] | Wang Yan, Hu Jiefei, Xu Guanghui, Li Shusheng, Xiong Wei. Numerical Simulation and Experimental Verification of Asymmetrical Three-roll Bending Process [J]. China Mechanical Engineering, 2016, 27(15): 2085-2090. |
[9] | Ma Junlin, Gao Shiheng, Li Ping, Xue Kemin. Numerical Simulation and Experimental Study on Rotary Roll Forging for a New Al-Zn-Mg-Cu Alloy Cup#br# [J]. China Mechanical Engineering, 2016, 27(07): 970-975. |
[10] | Gong Jingping, Li Xiangfeng, Zuo Dunwen, Kang Xiaojun, Qiu Jiabin. Three-dimensional FEA of Manufacturing Process of Small-diameter Split Sleeve by Two-axle Bending [J]. China Mechanical Engineering, 2015, 26(8): 1117-1124. |
[11] | Cao Shufen1;Zhang Liqiang1,2;Guo Pengcheng1;Li Luoxing1. Study on Hot Deformation Behavior and Flow Stress Constitutive Model of 22MnB5 at High Temperature [J]. China Mechanical Engineering, 2014, 25(9): 1256-1261. |
[12] | DIAO Sheng-Dun, LI Yong-Yi, FAN Chu-Qin. Status Analysis of Plastic Processing Technology with Ultrasonic Vibration [J]. China Mechanical Engineering, 2013, 24(6): 835-840. |
[13] | YAN Qiu-Sheng-1, HUANG Sheng-Wei-2, LI Zhong-Rong-2, BO Ji-Sheng-1, LAI Zhi-Min-1. New Technology Analysis on Metal Strips No-burr Precision Slitting [J]. China Mechanical Engineering, 2012, 23(17): 2102-2106. |
[14] | DAN Feng-Jian-1, WANG Lei-Gang-2. #br# Investigation of High Tensile Strength and High Electrical Conductivity Pure Copper Fabricated by Severe Plastic Deformation [J]. China Mechanical Engineering, 2012, 23(17): 2106-2110. |
[15] | FAN Wei-Fa, LI Dong-Na, CHEN Wen-Zhe. Study on Spinning Process of AZ31B Magnesium Alloy Sheet [J]. China Mechanical Engineering, 2012, 23(11): 1272-1275. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||