Type Synthesis of a Novel Three Degree of Freedom Translational Decoupled Parallel Mechanism

Abstract

Abstract:

Based on the screw theory, the realization conditions of the translational degree of freedom(DOF) for the parallel mechanism were proposed, while the selective guideline of the input pair was elaborated and the configurations principles of the kinematic pair were established. All of these were to form the relatively complete type synthesis theory of the translational decoupled parallel mechanism(TDPM). According to the obtained theory, taking a practical engineering task as an example, a full isotropic TDPM which was composed of three branches was achieved after synthesizing all branches of the 3-TDPM. Then the DOF and the forward and inverse solution of the new mechanism were analyzed. Finally, the prototype was manufactured in accordance with the configuration parameters which were obtained on the basis of the condition numbers of Jacobian matrix.

Key words: screw , theory;parallel , mechanism;translational , decoupled;configuration , design

摘要：

以螺旋理论为基础,提出并联机构移动自由度的实现条件,阐述了分支输入副的选择准则,确立了分支运动副的配置原则,进而形成了较为完整的移动解耦并联机构构型综合理论。根据所得综合理论,以工程实际任务要求为例,综合出三移动解耦并联机构的各分支,并选取其中三个分支组合得到一种具有全局各向同性的新移动解耦机型。针对新机构的自由度及位置正反解进行分析，以雅可比矩阵的条件数为目标进行了位形优化，并据此参数开展了样机研制。

关键词: 螺旋理论, 并联机构, 移动解耦, 构型设计

CLC Number:

TP24

Zeng Daxing, Li Xiaofan, Qiu Xuesong, Chang Wei, Hou Yulei. Type Synthesis of a Novel Three Degree of Freedom Translational Decoupled Parallel Mechanism[J]. China Mechanical Engineering, 2015, 26(10): 1279-1283.

曾达幸, 李晓帆, 邱雪松, 常威, 侯雨雷. 新型三平移解耦并联机构的综合[J]. 中国机械工程, 2015, 26(10): 1279-1283.

References

[1]Zeng Daxing, Hou Yulei, Lu Wenjuan, et al. Com- parative Analysis of Characteristics of the Coupled and Decoupled Parallel Mechanisms[J]. Chinese Journal of Mechanical Engineering, 2010, 23 (4) : 468-476.
[2]Clavel R. A Fast Robot with Parallel Geometry [C]//Proceedings of 8th International Symposium on Industrial Robots. Sydney, 1988 : 91-100.
[3]杨廷力,金琼,刘安心,等.基于单开链单元的三平移并联机器人机构型综合及其分类[J].机械工程学报,2002,38(8):31-36.
[4]Huang Zhen,Li Qinchuan. Type Synthesis Principle of Minor-mobility Parallel Manipulators[J]. Science in China Series E : Technological Sciences, 2002,45 (3) : 241-248.
[5]史巧硕,高峰,余发国.基于GF集的三自由度移动并联机构构型研究[J].上海交通大学学报,2008,42(7):1109-1115.
[6]Wang Hongbo,Du Ning, Hou Huina,et al. An Upper Limb Rehabilitation Robot Based on 3-RRC Parallel Mechanism[C]//Proceedings of 2012 Inter- national Conference on Advanced Meehatronic Sys- tems. Tokyo, 2012 : 668-673.
[7]黄真,李秦川.三自由度移动并联机器人机构:中国,CNl311083[P].2001-09-05.
[8]Kong Xianwen,Gosselin C M. Type Synthesis of In- put- output Decoupled Parallel Manipulators [J]. Transactions of the Canadian Society for Mechanical Engineering, 2004,28 (2) : 185-196.
[9]Gogu G. Structural Synthesis of Fully-isotropic Translational Parallel Robots via Theory of Linear Transformations[J]. European Journal of Mechanics A/Solids, 2004,23 (6): 1021-1039.
[10]Briot S, Boney I A. Pantopteron.. a New Fully De-coupled 3DOF Translational Parallel Robot for Pick-and-Place Applications[J]. ASME Journal of Mechanisms and Robotics,2009,1(2) : 1-9.
[11]Glazunov V. Design of Decoupled Parallel Manipulators by Means of the Theory of Screws[J]. Mechanism and Machine Theory, 2010,45 (2): 239-250.
[12]石志新,叶梅燕.一类新型全解耦三平移并联机器人机构的构型设计[J].机械设计与制造,2010(8):178-180.
[13]Chen Qiaohong, Li Qinchuan, Wu Chuanyu, et al. Mobility, Constraint Singularity and Isotropy of the Translational Parallel Mechanism[J]. Chinese Journal of Mechanical Engineering, 2009, 22 (6) : 841-848.
[14]Zeng Daxing, Huang Zhen. Type Synthesis of the Rotational Decoupled Parallel Mechanism Based on Screw Theory[J]. Science China Technological Sci ences,2011,54(4): 998-1004.
[15]曾达幸,常威,卢文娟,等.结构完全对称的三自由度移动解耦并联机器人机构:中国,CNl03072132A[P].2013-05-01.
[16]黄真,赵永生,赵铁石,著.高等空间机构学[M].北京:高等教育出版社,2006:387.