Study on Critical Preload of Prestressed Composite Structure Hydraulic Press

Abstract

Abstract:

The prestressed composite structures are widely used in the body design of heavy hydraulic press. How to determine the appropriate preload is a crucial issue. A calculation model of critical preload of hydraulic press frame was built with consideration of preload, for the hydraulic forging presses, especially the hydraulic free forging presses, under eccentric loads, on the basis of existing analysis model. Taking the three-cylinder and double-spherical joints hydraulic press as an example, the formula of critical preload was derived. To verify the formula, the critical preloads of a body model were tested experimentally, which was designed and manufactured at a ratio of 1∶15 based on 120MN hydraulic press, under different loads and offsets (10mm and 30mm). The results show that critical preloads calculated by the method herein are consistent with experimental values.

Key words: hydraulic press, composite structure, integration, eccentric load, critical preload

摘要：

预紧组合结构广泛应用于大型液压机本体设计,预紧力的确定是其关键问题。针对锻造液压机,尤其是自由锻液压机经常处于偏心载荷工况这一问题,在现有的偏载工况机架受力分析模型的基础上,进一步引入预紧力,建立了液压机机架临界预紧力的计算模型,并以三缸双球铰液压机为例,推导了其临界预紧力计算公式。设计制造了以某厂120MN三缸双球铰自由锻造液压机为原型的1∶15的本体模型,并对该液压机处于不同工作载荷、偏心距分别为10mm和30mm工况下机架保持整体性所需的临界预紧力进行了实验测试。实验结果表明,所提的临界预紧力计算方法具有一定的可靠性,但该值偏安全。

关键词: 液压机, 组合结构, 整体性, 偏心载荷, 临界预紧力

CLC Number:

TG315.4

Dong Xiaochuan, Jin Miao. Study on Critical Preload of Prestressed Composite Structure Hydraulic Press[J]. China Mechanical Engineering, 2014, 25(9): 1158-1163.

董晓传, 金淼. 预紧组合结构液压机临界预紧力的研究[J]. 中国机械工程, 2014, 25(9): 1158-1163.

References

[1]Lu A B，Oub H，Armstrong A C G，et al．3D Die Shape Optimization for Net-shape Forging of Aerofoil Blades[J]．Materials and Design，2009，30(7)：2490-2500．
[2]Opiela M，Grajar A．Elaboration of Forging Conditions on the Basis of Precipitation Analysis of M-X Type Phases in Microalloyed Steels[J]．Archives of Civil and Mechanical Engineering，2012，12(4/5)：427-435．
[3]Chen Hui，Tan Jingping，Gong JinLi，et al．Research on Mathematic Model and Measuring Method of Moving Beam Attitude in Large Forging Hydraulic Press[J]．Applied Mechanics and Materials，2012，(128/129)：1213-1216.
[4]李艳聪，张连洪，刘占稳，等. 刚度和质量驱动的预紧组合框架式液压机多目标优化设计[J]. 机械工程学报， 2010，46(01)：140-146.
Li Yancong，Zhang Lianhong，Liu Zhanwen，et al．Multi-objective Optimization Design of Heavy Forge Hydraulic Press Driven by Stiffness and Mass[J]．Journal of Mechanical Engineering，2010，46(1)：140-146．
[5]金淼，董晓传，沙心勇．全预紧组合结构液压机临界预紧力的分析与计算[J]．燕山大学学报，2012，36(5)：383-387．
Jin Miao，Dong Xiaochuan，Sha Xinyong．Analysis and Calculation of Critical Preload for Prestressed Composite Structures[J]．Journal of Yanshan University，2012，36(5)：383-387．
[6]Jiang Shuyun, Mao Hebing．Investigation of Variable Optimum Preload for a Machine Tool Spindle[J]．International Journal of Machine Tools and Manufacture，2010，50(1)：19-28．
[7]Richard Liew J Y，Xiong D X．Effect of Preload on the Axial Capacity of Concrete-filled Composite Columns[J]．Journal of Constructional Steel Research，2009，65(3)：77-88．
[8]Zhang Haoran，Yan Yongnian，Zhang Renji，et al．Analysis of the Reliability of the Dissected Frame of Heavy Equipment[J]．Tsinghua Science & Technology，2010，15(5)：526-533．
[9]Strano M，Monno M，Rossi A．Optimized Design of Press Frames with Respect to Energy Efficiency[J]．Journal of Cleaner Production，2013，41：140-149．
[10]吴生富，金淼，聂绍珉，等．大型锻造液压机全预紧组合机架的整体性及影响因素分析[J].塑性工程学报, 2006, 13(2): 110-113.
Wu Shengfu，Jin Miao，Nie Shaomin， et al．The Integration Property of Heavy Forge Hydraulic Press and Its Influence Factors[J]．Journal of Plasticity Engineering，2006，13(2)：110-113．
[11]金淼，董晓传，邹宗园，等．给定预紧力下组合机架的上限载荷的计算[J]．中国机械工程，2012，23(20)：2476-2480．
Jin Miao，Dong Xiaochuan，Zou Zongyuan，et al．Calculation of the Upper-bound Load for Composite Frame Hydraulic Press under the Given Preload[J]．China Mechanical Engineering，2012，23(20)：2476-2480．
[12]Groβmann K，Wiemer H，Hardtmann A，et al．The Advanced Forming Process Model including the Elastic Effects of the Forming Press and Tool[J]．Archives of Civil and Mechanical Engineering，2008，8(3)：41-54．
[13]Kruic V，Arentoft M，Maera S，et al．A Combined Approach to Determine Workpiece-tool-press Deflections and Tool Loads in Multistage Cold-forging[J]．Journal of Materials Processing Technology，2011，211 (1)： 35-42．
[14]Barbuta M，Toman I O，Harja A M, et al．Behavior of Short Polymer-high Strength Concrete Columns under Eccentric Compression[J]．Archives of Civil and Mechanical Engineering，2013，13(1)：119-127．
[15]Weroński W S，Gontarz A，Pater Z．The Research of Forging Process of Eccentric Part on Three Slide Forging press[J]. Journal of Materials Processing Technology，2013，177(1/3)：214-217．
[16]俞新陆．液压机现代设计理论[M]．北京：机械工业出版社，2009.