Research on Estimated Calculation Model of Additional Yaw Torque after Vehicle Tire Blow-out
Chen Qingzhang1;Li Xuezhi1;Guo Lishu2;He Ren3
1.Changshu Institute of Technology,Changshu,Jiangsu,215500
2.Zhejiang Asia-pacific Mechanical & Electronic Co.,Ltd.,Hangzhou,311203
3.Jiangsu Province Key Laboratory of Automotive Engineering,Jiangsu University,Zhenjiang,Jiangsu,212013
Online:2014-02-10
Published:2014-02-07
Supported by:
Jiangsu Provincial Natural Science Foundation of China(No. BK2011367)
Chen Qingzhang, Li Xuezhi, Guo Lishu, He Ren. Research on Estimated Calculation Model of Additional Yaw Torque after Vehicle Tire Blow-out[J]. China Mechanical Engineering, 2014, 25(3): 422-425.
[1]陈庆樟.汽车爆胎应急制动稳定性控制技术研究[R].杭州:浙江亚太机电股份有限公司,2011.
[2]Patwardhan S, Tan H S, Tomizuka M. Experimental Results of a Tire-burst Controller for AHS[J]. Control Engineering Practice, 1997,5(11):1615-1622.
[3]Patwardhan S, Tomizuka M, Zhang W B, et al. Theory and Experiments of Tire Blow-out Effects and Hazard Reduction Control[C]//American Control Conference.Baltimore,MD,USA,1994:1207-1209.
[4]Zbigniew Lozia. Simulation Test of Biaxial Vehicle motion after a “Tire Blow-out”[J]. SAE Paper, 2005010410.
[5]宗长富,胡丹,刘海贞.爆胎自动制动控制算法报告[R].长春:吉林大学,2010.
[6]傅建中,石勇.轮胎气压监测与爆胎自动减速系统[J].汽车工程,2006,28(2):199-200.
Fu Jianzhong, Shi Yong. The Tire Pressure Monitoring and Vehicle Deceleration System for Tire Blow-out[J]. Automobile Engineering, 2006, 28(2): 199-200.
[7]黄江,郭孔辉,宋晓琳.爆胎汽车的稳定性控制[J].中国机械工程,2009,20(16):2006-2007.
Huang Jiang, Guo Konghui, Song Xiaolin. Vehicle Stability Control Method after Tire Blow-out[J]. China Mechanical Engineering, 2009, 20(16): 2006-2007.