Research on Potential Energy Recovery System for Electric Forklift

Abstract

Abstract:

In order to save energy, a potential energy recovery system for electric forklift was proposed based on generator and super-capacitor. Control strategy of potential energy recovery system was given, parameters of the system were analyzed and designed. AMESim and MATLAB were used to analyse potential energy recovery efficiency, then through experimental study the effectiveness of simulation model and the accuracy of simulation results were tested. The simulation and experimental results show that the parameters of potential energy recovery system are reasonably matched, energy recovery effect is obvious.

Key words: electric forklift, potential energy recovery system, control strategy, parameter matching

摘要：

提出一种基于发电机及超级电容器的电动叉车势能回收系统方案，给出了该系统的控制策略并进行了参数匹配设计。利用AMESim和MATLAB进行了势能回收效率仿真分析，最后通过实车试验检验了仿真模型的有效性和仿真结果的正确性。仿真和试验结果表明，所设计的电动叉车势能回收系统参数匹配合理，能量回收效果明显。

关键词: 电动叉车, 势能回收系统, 控制策略, 参数匹配

CLC Number:

TH137.7

Zhang Kejun, Chen Jian. Research on Potential Energy Recovery System for Electric Forklift[J]. China Mechanical Engineering, 2014, 25(21): 2869-2874.

张克军, 陈剑. 电动叉车势能回收系统研究[J]. 中国机械工程, 2014, 25(21): 2869-2874.

[1]	WANG Yu, WU Tingjia, LI Xiang, YU Xiongqing, . Matching Design of Distributed Propulsion Systems for Hydrogen-Lithium Batteries Powered Commuter Aircrafts [J]. China Mechanical Engineering, 2024, 35(01): 27-35.
[2]	YANG Xiao, ZENG Lingwan, CHEN Peng, DU Yanbin, LI Bo. Complex Characteristics and Multi-dimensional Control Strategies of Heat Flow in Dry Gear Hobbing Machines [J]. China Mechanical Engineering, 2022, 33(05): 623-629.
[3]	SUN Xiaojun, SONG Enzhe, YAO Chong. Research Status of Key Technologies for Energy Management System of Marine Hybrid Propulsion Systems [J]. China Mechanical Engineering, 2022, 33(04): 469-481,495.
[4]	MO Chongxiang;XIU Caijing;LIANG Wanwu. Design of P2 Hybrid Engine Start Control [J]. China Mechanical Engineering, 2021, 32(01): 117-125.
[5]	ZHANG Lixia, PANG Qiqi, PAN Fuquan, GE Xiaohan, LIN Binqin, HE Yichao, WEI Yintao, DU Yongchang. Suspension Control Applications of Magnetorheological Damper Magic Formula Model [J]. China Mechanical Engineering, 2020, 31(14): 1659-1665.
[6]	LI Yongquan1,2;WU Pengtao1,2;ZHANG Yang1,2 ;ZHANG Lijie2,3. Dynamics Parameter Identification and Control of a Spherical 2-DOF Redundant Driven Parallel Robot System [J]. China Mechanical Engineering, 2019, 30(16): 1967-1975.
[7]	LI Chunfu1;XI Junqiang2;LIU Chunying3. Analyses and Control of Influence Factors for Multi-plate Wet Clutches in Fast Oil Filling Processes [J]. China Mechanical Engineering, 2019, 30(05): 513-518.
[8]	WANG Yongkuan1,2;QIAN Lijun1;NIU Limin2. Multi-objective Optimization of Control Strategies for Four-wheel Drive PHEV Based on Immune Algorithm [J]. China Mechanical Engineering, 2017, 28(14): 1683-1690.
[9]	TAN Xianwen, FANG Jinhui, FEI Shuhui, JIN Yuefeng. Simulation on Parameter Matching Based on Multi Control Strategies of Oil-hydraulic Hybrid Excavator [J]. China Mechanical Engineering, 2017, 28(09): 1043-1049.
[10]	Mao Jun, Yang Zhenhua, Pan Dewen. Control Strategy of Shearer Automatic Height Adjusting Based on Adaptive Fuzzy Sliding-mode Variable Structure [J]. China Mechanical Engineering, 2016, 27(03): 360-364.
[11]	Yao Jing, Cao Xiaoming, Li Bin, Kong Xiangdong, Zhou Fang. Research on Energy Saving of Pressure and Displacement Compound Control Strategy for Fast Forging System [J]. China Mechanical Engineering, 2016, 27(02): 265-272.
[12]	Gao Aiyun, Deng Xiaozhong, Zhang Mingzhu, Fu Zhumu. Regenerative Braking Control Strategy for PHEV Based on Optimal Braking Effect [J]. China Mechanical Engineering, 2015, 26(15): 2118-2124.
[13]	Zhang Donghao, Xiang Changle, Han Lijin, Zheng Hailiang. Research on Dynamic Control Strategy of a HEV Based on Drivability Optimization [J]. China Mechanical Engineering, 2015, 26(11): 1550-1555.
[14]	Zheng Hailiang, Xiang Changle, Han Lijin, Zhang Donghao. Power Distribution Strategy Optimization for Two-mode Electro-mechanical Transmission [J]. China Mechanical Engineering, 2015, 26(10): 1415-1419.
[15]	Liu Yonggang, Qin Datong, Peng Zhiyuan, Ye Ming. Experimental Research on Hardware-in-the-Loop of Novel Hybrid Electric System [J]. China Mechanical Engineering, 2014, 25(17): 2374-2380.

Research on Potential Energy Recovery System for Electric Forklift

电动叉车势能回收系统研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics