China Mechanical Engineering ›› 2014, Vol. 25 ›› Issue (15): 2091-2097.
Previous Articles Next Articles
Tan Yuanqiang1;Song Junhua1;Zhang Hao1;Wang Jiaqian2;Deng Rong1;Yang Dongmin1
Online:
2014-08-10
Published:
2014-08-13
Supported by:
谭援强1;宋军华1;张浩1;王佳茜2;邓熔1;杨冬民1
基金资助:
CLC Number:
Tan Yuanqiang, Song Junhua, Zhang Hao, Wang Jiaqian, Deng Rong, Yang Dongmin. Numerical Study of Wear Process on Pipe Wall in Concrete Pumping Using DEM[J]. China Mechanical Engineering, 2014, 25(15): 2091-2097.
谭援强, 宋军华, 张浩, 王佳茜, 邓熔, 杨冬民. 混凝土泵送中管壁磨损过程的离散元模拟研究[J]. 中国机械工程, 2014, 25(15): 2091-2097.
[1]赵志缙.混凝土泵送施工技术[M].北京:中国建筑工业出版社,1998. [2]Chen X, McLaury B S, Shirazi S A. Effects of Applying a Stochastic Rebound Model in Erosion Prediction of Elbows and Plugged Tee[C]//Fluids Engineering Division Meeting. Mentreal Quebec,2002. [3]Stoker R L. Erosion Due to Dust Particles in a Gas Stream[J]. Industry and Engineering Chemistry, 1949(41): 1196-1199. [4]Tilly G P. Erosion Caused by Airborne Particle[J]. Wear, 1969,14(1): 63-79. [5]Mills D. Erosive Wear Problems in Industry with Particular Reference to Process Plant, Power Station and Bulk Solids Handling Systems[C]//SOLIDEX’86 Conference Exhibition. Harrogate, 1986. [6]Mazumder Q H, Shirazi S A, McLaury B S. Prediction of Solid Particle Erosive Wear of Elbows in Multiphase Annular Flow-model Development and Experimental Validations[J]. ASME: Journal of Pressure Vessel Technology, 2008, 130: 113031-113038. [7]Burnett A J. The Use of Laboratory Erosion Tests for the Prediction of Wear in Conveyor Bends[D]. London:University of Greenwish,1996. [8]Deng T, Patel M, Hutchings I, et al. Effect of Bend Orientation on Life and Puncture Point Location due to Solid Particle Erosion of High Concentrated Flow in Pneumatic Conveyors[J]. Wear, 2005,258(1/2/3/4): 426-33. [9]Hutchings I M. Tribology[M]. Oxford:Butterworth Heinemann, 2001. [10]Gammal M E, Mazhar H, Cotton J S, et al. The Hydrodynamic Effects of Single Phase Flow on Flow Accelerated Corrosion in a 90-degree Elbow[J]. Nuclear Engineering and Design, 2010(240): 1589-1598. [11]Chen X H, McLaury B S, Shirazi S A. A Comprehensive Procedure to Estimate Erosion in Elbows for Gas/Liquid/Sand Multiphase Flow[J]. Journal of Energy Resources Technology, 2006(128): 70-79. [12]Ma K T, Ferng Y M, Ma Y P. Numerically Investigating the Influence of Local Flow Behaviors on Flow-accelerated Corrosion Using Two-fluid Equations[J]. Materials for Nuclear Systems, 1998(123): 90-102. [13]Hidayat M, Rasmuson A. Some Aspects on Gas-solid Flow in a U-bend: Numerical Investigation[J]. Powder Technology, 2005(153): 1-12. [14]Barton N A. Erosion in Elbows in Hydrocarbon Protection Systems: Review Document[R]. Glasgow:Health and Safety Executive.2003. [15]王安麟, 虞晓华, 俞梓仪,等. 多相流体条件下混凝土泵送弯管磨损机理分析[J].上海交通大学学报, 2009, 43(2): 318-321. Wang Anlin, Yu Xiaohua, Yu Ziyi, et al. The Wear Mechanism of Concrete Pumping Pipe under the Conditions of Multiphase Fluid[J]. Journal of Shanghai Jiao Tong University, 2009, 43(2): 318-321. [16]Tan Y Q, Zhang H, Yang D M, et al. Numerical Simulation of Concrete Pumping Process and Investigation of Wear Mechanism of the Piping Wall[J]. Tribology International,2012(46): 137-144. [17]Zhang H, Tan Y Q, Yang D M, et al. Numerical Investigation of the Location of Mmaximum Erosive Wear Damage in Elbow: Effect of Slurry Velocity, Bend Orientation and Angle of Elbow[J]. Powder Technology, 2012(217): 467-476. [18]Chu H W, Machida H W, Kobayashi A H. Verification of DEM to Fresh Concrete by Sphere Dragging Viscometer[C]//Proceedings of the Annual Conference of JSCE. 1997: 463-468. [19]Annika G. Numerical Modelling of Self-Compacting Concrete Flow[D]. Stockholm:Royal Institute of Technology (KTH), 2009. [20]Zhang W C. Parallel Discrete Element Simulation and Its Application to the Study of Solid-Liquid Flow Behavior[D]. Taipei:Taiwan University, 2009. [21]Zhang H, Tan Y, Shu S, et al. Numerical Investigation on the Role of Discrete Element Method in Combined LBM-IBM-DEM Modeling[J]. Computers & Fluids, 2014, 94:37-48. [22]Zhang H, Tan Y Q, Li M J. A Numerical Simulation of Motion of Particles under the Wafer in CMP[C]//International Conference on Computer Science and Software Engineering. Wuhan, 2008:31-34. [23]Zhang H, Trias F X M, Tan Y Q, et al. Parallelization of a DEM/CFD Code for the Numerical Simulation of Particle-laden Turbulent Flows[C]//23rd International Conference on Parallel Computational Fluid Dynamics. Barcelona, 2011:1-5. [24]Quoc P H D, Uomoto T. Review on Simulation of Fresh Concrete Using DEM[C]//The 3rd ACF International Conference ACF/VCA. Ho Chi Minh City,2008:585-591. [25]Cundall P A.A Computer Model for Simulating Progressive Large Scale Movements in Blocky System[C]//Proc. Symp. Int. Soc. Rock Mechanics. Rotterdam, 1971: 8-12. [26]Itasca Consulting Group Inc..PFC2D User’s Manuals[Z]. Minneapdis:Itasca Consulting Group Inc.,2004. [27]Yue X Q, Zhang H, Luo C S, et al. Parallelization of a DEM Code Based on CPU-GPU Heterogeneous Architecture[J]. Parallel Computational Fluid Dynamics, 2013(405): 149-159. [28]Zhu H P, Zhou Z Y, Yang R Y, et al. Discrete Particle Simulation of Particular Systems: Theoretical Developments[J]. Chemical Engineering Science,2007(62): 3378-3396. |
[1] | ZHENG Jinde, WANG Xinglong, PAN Haiyang, TONG Jinyu, LIU Qingyun. Rolling Bearing Fault Diagnosis Method Based on Adaptive Autogram [J]. China Mechanical Engineering, 2021, 32(07): 778-785,792. |
[2] | WU Shi, ZHAO Hongwei, LI Xin. Inversion Analysis of Surface Micro-geomorphology in Splicing Areas of Cover Molds [J]. China Mechanical Engineering, 2021, 32(07): 806-804. |
[3] | LI Fangyi, QI Xiaoxia, LI Yanle, WANG Liming, DU Jiyu, XU Jingwei, MENG Xiaoning. Review on Repair Technologies for Key Part Remanufacturing of Shield Machines [J]. China Mechanical Engineering, 2021, 32(07): 820-831. |
[4] | NI Hengxin, YAN Chunping, CHEN Jianlin, HOU Yuehui, CHEN Liang. Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters [J]. China Mechanical Engineering, 2021, 32(07): 832-838. |
[5] | ZHENG Hualin1;XIANG Xiping1;HU Teng1;MI Liang2;LIU Yan3. Distinct Modeling and Identification Technology for Rotary Axes Geometric Error Elements of Five Axis Machining Centers [J]. China Mechanical Engineering, 2021, 32(05): 547-555. |
[6] | BAI Xiaofan;HOU Shujun;LI Kai;QU Yunxia. Drilling Forces and Temperature Rises in Axial Low-frequency Vibration-assisted Cortical Bone Drilling [J]. China Mechanical Engineering, 2021, 32(03): 321-330. |
[7] | QIN Qin1,2 ;HE Liu1;LI Cheng2;ZANG Yong1. Research on Springback Defects in Incremental Forming of Cu-Al Bimetal [J]. China Mechanical Engineering, 2021, 32(03): 348-356. |
[8] | GAO Yankai;CHEN Dong;XIA Huichao;WU Guangtao. Delay Locking Buckle Technology in Hot Rolled Steel Coil Bundling [J]. China Mechanical Engineering, 2021, 32(03): 363-367. |
[9] |
LIN Zhishu1,2;HUANG Hui2.
Experimental Investigation of Crystal Glass in Multi-wire Saw with Reciprocating and Rocking
[J]. China Mechanical Engineering, 2021, 32(02): 132-140.
|
[10] |
DING Jiaxin ;WANG Zhenya ;YAO Ligang ;CAI Yongwu.
Rolling Bearing Fault Diagnosis Based on GCMWPE and Parameter Optimization SVM
[J]. China Mechanical Engineering, 2021, 32(02): 147-155.
|
[11] | YANG Luhang1;LI Baoqing1;WANG Ping2,3;WANG Jian2,3;YANG Yu1. Fault Diagnosis Method of Rolling Bearings Based on Probability Output Flexible Convex Hull [J]. China Mechanical Engineering, 2021, 32(01): 40-46. |
[12] | FAN Simin;XIAO Jiming;DONG Yongheng;HONG Xiantao;ZHAO Ting. Study on Modeling and Simulation of Surface Topography of Spherical Milling with Ball-end Milling Cutters [J]. China Mechanical Engineering, 2020, 31(24): 2924-2930,2936. |
[13] | CUI Zhongming;WANG Xing;HE Qingshan;ZHOU Baocang. A Method for Extruding Grinding Dressing Super-abrasive Grinding Wheels Using Free Grains under Constraint of Diamond Abrasive Surface [J]. China Mechanical Engineering, 2020, 31(24): 2959-2965. |
[14] | DAI Yifan;ZHONG Yaoyu;SHI Feng;TIAN Ye. Development of High-light Optical Element Processing Technology [J]. China Mechanical Engineering, 2020, 31(23): 2788-2797. |
[15] | LI Yingli;LI Xinyu;GAO Liang. Review on Hybrid Flow Shop Scheduling Problems [J]. China Mechanical Engineering, 2020, 31(23): 2798-2813,2828. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||