Experimental Study on Variations of Surface Topography in Ball/Plane Contact

Abstract

Abstract:

Based on experiments, the influences of pressure, lubrication conditions and original surface topography on the surface topography variation of ball/plane contact were researched. Different original surfaces were used in the experiments. A series of ball/plane contact experiments under different pressures and different lubrication conditions were conducted. The surface of the specimens before and after the experiments were scanned by Talysurf CCI Lite Non-contact 3D optical profiler respectively, and characterized by ISO25178. The results show that the pressure, lubrication conditions, as well as the original topography of specimen have an obvious influence on the surface topography after the experiments, and the specific relationship among them is obtained.

Key words: plastic deformation, normal pressure, lubrication condition, surface topography

摘要：

基于试验探究了球/平面接触过程中,正压力、润滑条件及原始表面形貌对试验后表面形貌的影响。试验中,采用不同原始表面,在不同压力、不同润滑条件下，完成了一系列球面与粗糙面的接触试验。试验前后分别使用Talysurf CCI Lite非接触式三维光学轮廓仪对试样表面进行了测量，并用ISO25178定义的参数对三维表面形貌进行了表征。研究结果表明,正压力、润滑条件和工件的原始形貌对试验后的表面形貌具有显著的影响，并给出了具体压力、润滑条件及原始表面形貌对塑性变形后表面形貌的影响关系。

关键词: 塑性变形, 正压力, 润滑条件, 表面形貌

CLC Number:

TH117

Wang Aibin, Liu Kun, Wang Hongtao, Liu Xiaojun. Experimental Study on Variations of Surface Topography in Ball/Plane Contact[J]. China Mechanical Engineering, 2014, 25(13): 1790-1794.

王爱彬, 刘焜, 王宏涛, 刘小君. 球/平面接触表面形貌变化的试验研究[J]. 中国机械工程, 2014, 25(13): 1790-1794.

References

[1]Rasp W,Wichern C M.Effects of Surface-topography Directionality and Lubrication Condition on Frictional Behaviour during Plastic Deformation[J].Materials Processing Technology,2002,125-126:379-386．
[2]王志刚.超高精度表面的塑性加工技术[J].锻压技术,2003,28(2):1-4．
Wang Zhigang.Ultra-smooth Surface Finishing by Metal Forming Processes[J].Forging & Stamping Technology, 2003, 28(2):1-4．
[3]Wilson W R D,Sheu S.Real Area of Contact and Boundary Friction in Metal Forming[J].International Journal of Mechanical Science,1988,30(7):475-489．
[4]Saha P K,Wilson W R D.Influence of Plastic Strain on Friction in Sheet Metal Forming[J]. Wear,1994,172(2):167-173．
[5]Lo Sy-Wei,Yang Tung-Sheng.A New Mechanism of Asperity Flattening in Sliding Contact:The Role of Tool Elastic Microwedge[J].ASME Journal of Tribology,2003,125(4):713-719．
[6]Dohda K,Wang Z.Investigation into Relationship between Friction Behavior and Plastic Deformation Using a Newly Devised Rolling-type Tribometer[J].ASME Journal of Tribology,1995,117(3):529-533．
[7]Dohda K,Wang Z.Effects of Average Lubricant Velocity and Sliding Velocity on Friction Behavior in Mild Steel Sheet Forming[J].ASME Journal of Tribology,1998,120(4):724-728．
[8]Hu Z M,Dean T A.A Study of Surface Topography,Friction and Lubricants in Metal Forming[J].International Journal of Machine Tools & Manufacture,2002,40(11):1637-1649．
[9]Rasp W,Wichern C M.Effects of Surface-topography Directionality and Lubrication Condition on Frictional Behaviour during Plastic Deformation[J].Journal of Materials Processing Technology,2002,125/126:376-386．
[10]Weidel S,Engel U.Characterization of the Flattening Behaviour of Model Asperities[J].Wear,2009,266(5/6):596-599．
[11]Liu Xiaojun,Liewald M,Beck D.Effects of Rolling Direction and Lubricant on Friction in Sheet Metal Forming[J].Journal of Tribology,2009,131(4):1-7．
[12]Li H J,Jiang Z Y,Wei D B,et al.Study on Surface Asperity Flattening during Uniaxial Planar Compression[J]. Wear, 2011, 271(9/10):1778-1784．
[13]刘小君,魏庆森,张彦,等.基于离散元法的粗糙表面摩擦过程数值模拟[J].合肥工业大学学报,2011,34(1):23-27．
Liu Xiaojun,Wei Qingsen,Zhang Yan,et al.Numerical Simulation of Frictional Process of Rough Surfaces Based on Discrete Element Method[J].Journal of Hefei University of Technology,2011，34(1)：23-27．
[14]李成贵,董申.三维表面微观形貌的表征参数和方法[J].宇航计测技术,1999,19(6):33-43．
Li Chenggui,Dong Shen.Characterization Parameters and Methods of 3D Surface Microcosmic Morphology[J].Journal of Astronautic Metrology and Measurement,1999,19(6):33-43．
[15]胡兆稳,刘小君,王静,等.多尺度表面形貌的功能评定与控制[J]．中国机械工程，2010，21(7)：773-777．
Hu Zhaowen,Liu Xiaojun,Wang Jing,et al．Functional Assessment and Manufacturing Control of Multi-scale Surfaces[J]. China Mechanical Engineering,2010,21(7):773-777．
[16]ISO/TS CD 25178-2-2006,Geometric Product Specifications(GPS)-Surface Texture:Areal-Part 2:Terms,Definition and Surface Texture Parameters[S].Geneva:ISO,2007．
[17]金守峰,宿月文,郭彩霞.三维分形粗糙表面的修正接触模型[J].中国机械工程,2012,23(9):2316-2319．
Jin Shoufeng,Su Yuewen,Guo Caixia.Revised Contact Model among Three Dimensional Fractal Rough Surfaces[J].China Mechanical Engineering,2012,23(19):2316-2319．