China Mechanical Engineering ›› 2013, Vol. 24 ›› Issue (5): 703-709.
Previous Articles Next Articles
Yang Yifei;Pan Wei;Zhu Huangqiu
Online:
2013-03-10
Published:
2013-03-19
Supported by:
杨益飞;潘伟;朱熀秋
基金资助:
CLC Number:
YANG Yi-Fei, BO Wei, SHU Huang-Qiu. An Overview and Recent Research Progresses of Vertical Axis Wind Turbine[J]. China Mechanical Engineering, 2013, 24(5): 703-709.
杨益飞, 潘伟, 朱熀秋. 垂直轴风力发电机技术综述及研究进展[J]. 中国机械工程, 2013, 24(5): 703-709.
[1]Eriksson S, Bernhoff H, Leijon M. Evaluation of Different Turbine Concepts for Wind Power[J]. Renewable and Sustainable Energy Reviews, 2008, 12(5): 1419-1434. [2]Zhang Lixun, Zhang Song. Study on Synchronous Variable Pitch Vertical Axis Wind Turbine[C]//Asia Pacific Power and Energy Engineering.Wuhan, 2011: 1-5. [3]Takahashi R, Li Wu, Murata T,et al. An Application of Flywheel Energy Storage System for Wind Energy Conversion[C]//Proceedings of IEEE International Conference on Power Electronics and Drives Systems.Kuala Lumpur, 2005: 932-937. [4]Takahashi R, Tamura J. Frequency Control of Isolated Power System with Wind Farm by Using Flywheel Energy Storage System[C]//Proceedings of the 2008 International Conference on Electrical Machines.Vilamoura,2008: 1-6. [5]Takahashi R, Tamura J. Frequency Stabilization of Small Power System with Wind Farm by Using Flywheel Energy Storage System[C]//Power Electronics and Drive Systems.Cracow, 2007: 916-923. [6]赵振宙,郑源,周大庆,等. 基于数值模拟Savonius风力机性能优化研究[J]. 太阳能学报, 2010, 31(7): 907-911. Zhao Zhengzhou, Zheng Yuan, Zhou Daqing, et al. Optimization of the Performance of Savonius Wind Turbine Based on Numerical Study[J]. Acta Energiae Solaris Sinica, 2010, 31(7): 907-911. [7]赵振宙,郑源,徐小韵,等. 螺旋形S型垂直轴风轮结构优化设计[J]. 中国电机工程学报,2009,29(26):75-78. Zhao Zhenzhou, Zheng Yuan, Xu Xiaoyun, et al. Optimum Figuration of Helix S-type Vertical Axis Wind Turbine[J]. Proceedings of the CSEE, 2009, 29(26): 75-78. [8]李岩, 原丰, 林农. Savonius风力机叶片重叠比的风洞实验研究[J].太阳能学报, 2009, 30(2): 226-231. Li Yan, Yutaka Hara, Tsutomu Hayashi. AWind Tunnel Experimental Study on The Overlao Ratio of Savo- nius Rotors[J]. Acta Energiae Solaris Sinica, 2009, 30(2): 226-231. [9]Ushiyama I, Nagai H. Optimum Design Configurations and Performance of Savonius Rotors[J]. Wind Engineering, 1988, 12(1): 59-75. [10]Rabah K, Osawa B M. Design and Field Testing of Savonius Wind Pump in East Africa[J]. Int. J. of Amb. En., 1996, 17(2): 89-94. [11]Twidwell J W, Weir A D. Renewable Energy Resources[M]. Cambridge: The University Press Cambridge, 1985. [12]Eldridge F R. Wind Machines[M]. New York: Van Nostrand, 1980. [13]Kirke B K. Evaluation of Self-starting Vertical Axis Wind Turbines for Stand-alone Applications[D]. Brisbane: Griffith University, 1998. [14]Menet J L. A Double-step Savonius Rotor for Local Production of Electricity[J]. Renew Energy, 2004, 29(11): 1843-1862. [15]Kamoji M A, Kedare S B, Prabhu S V. Experiment Investigations on Single Stage, Two Stages and Three Stage Conventional Savonius Rotor[J]. International Journal of Energy Research, 2008, 32(10): 877-895. [16]Saha U K, Maity T S. Optimum Design Configuration of Savonius Rotor Through Wind Tunnel Experiments[J]. Wind Engineering and Industrial Aerodynamics, 2008,96(8/9): 1359-1375. [17]Sivasegaram S,Sivapalan S. Augmentation of Power in Slow Running Vertical-axis Wind Rotors Using Multiple Vanes[J]. Wind Engineering, 1983, 7(1): 12-19. [18]王企鲲.导流型垂直轴风力机内部流场数值模拟中若干问题的探讨[J]. 机械工程学报, 2010, 47(4): 147-154. Wang Qikun. Some Aspects on Flow Field Simulation for Guiding VAWT[J]. Chinese Journal of Mechanical Engineering, 2010, 47(4): 147-154. [19]Takao M. A Straight-bladed Vertical Axis Wind Turbine with A Guide Vane Row-effect of Guide Vane Geometry on The Performance[J]. Journal of Thermal Science, 2009, 18(1): 54-57. [20]Darrieus Gjm. Turbine Having Its Rotating Shaft Transverse to the Flow of the Current: US, 1835081[P]. 1931-12-08. [21]Ponta F L, Pont L C. A Novel Technique for High-power Electricity Generation in High-speed Wind Regimes[C]//Fifth World Renewable Energy Congress. Florence,1998: 1936-1939. [22]Ponta F L, Seminara J, Otero A D. On The Aerodynamics of Variable-geometry Oval Trajectory Darrieus Wind Turbines[J]. Renewable Energy, 2007, 32(1): 35-56. [23]Ponta F L, Otero A D. Innovative Concepts In Wind-power Teneration: the VGOT Darrieus[J]. Wind Turbine, 2008,32(1): 137-159. [24]Ponta F L, Lago L I. Analysing the Suspension System of Variable-geometry Oval-trajectory Darrieus[J]. Wind Turbines Energy for Sustainable Development, 2008, 2(3): 5-15. [25]Otero A D, Ponta F L. On The Structural Behaviour of Variable-geometry Oval-trajectory Darrieus Wind Turbines[J]. Renewable Energy, 2009, 34(3): 827-832. [26]Li Yan, Feng Fang, Sheng Maoli, et al. Computer Simulation on The Performance of a Combined-type Vertical Axis Wind Turbine[C]//2010 International Conference on Computer Design and Applications.Qinghuangdao, 2010: 247-250. [27]Wakui T, Tanzawa Y, Hashizume T,et al. Hybrid Configuration of Darrieus and Savonius Rotors for Stand-alone Wind Turbine-generator Systems[J]. Electrical Engineering in Japan, 2005, 150(4): 13-22. [28]Wakui T, Yamaguchi K, Hashizume T, et al. Effect of Operating Methods of Wind Turbine Generator System on Net Power Extraction under Wind Velocity Fluctuations in Fields[J]. Renewable Energy, 1999, 16(1): 843-846. [29]Alam M J, Iqbal M T. Design and Development of Hybird Vertical Axis Turbine[C]//Canadian Conference on Electrical and Computer Engineering.St. John’s, 2009: 1178-1183. [30]李惠光, 张广路, 周巧玲,等. 垂直轴磁悬浮风电悬浮系统的模糊滑模控制[J]. 武汉理工大学学报, 2010,32(10): 136-140. Li Huiguang, Zhang Guanglu, Zhou Qiaoling, et al. Fuzzy Sliding Mode Control for Vertical Axis Wind Power Generation Suspension System[J]. Journal of Wuhan University of Technology, 2010,32(10): 136-140. [31]Kamper J. Axial Flux Permanent Magnet Brushless Machines[M]. Dordrecht:Kluwer Academic Publishers, 2004. [32]李德孚. 我国离网型风力发电行业发展现状[J].可再生能源, 2009, 18(1): 54-57. Li Defu. The Status of Wind Power Generation Unconnected to Grid in China[J].Renewable Energy Resources, 2009, 18(1): 54-57. [33]唐任远. 现代永磁电机理论与设计[M]. 北京:机械工业出版社, 1997. [34]杨国良, 李惠光. 垂直轴永磁同步风力发电系统建模及瞬时功率控制策略[J]. 电力自动化设备, 2009, 29(5): 39-42. Yang Guoliang, Li Huiguang. Modeling and Instantaneous Power Control Strategies of VAWT-PMSG Power Generation System Electric Power Automation Equipment[J].Electric Power Automation Equipment,2009, 29(5): 39-42. [35]陈龙, 杜宏武, 武建柯, 等. 风力发电机用轴承简述[J]. 轴承, 2008(12): 45-50. Cheng Long, Du Hongwu, Wu Jianhe, et al. Brief Introduction of Wind Turbine[J]. Bearing, 2008(12): 45-50. [36]Chakraborty S, Kroposki B, Kramer W. Advanced Power Electronic Interfaces for Distributed Energy Systems[R]. Denver: National Renewable Energy Laboratory, 2008. [37]廖界儒, 吴有基, 林锦垣, 等. 磁浮式永磁同步风力发电机研制[C]//2010年台湾风能学术研讨会.澎湖, 2010: 149-153. [38]Liu Shuqin, Zhong Guobian, Li Deguang, et al. A Magnetic Suspended Self-pitch Vertical Axis Wind[C]//Generator Power and Energy Engineering Conference.Chengdu, 2010: 1-4. [39]Wu Huachun, Wang Ziyan, Hu Yefa. Study on Magnetic Levitation Wind Turbine for Vertical Type and Low Wind Speed[C]//Speed Power and Energy Engineering Conference.Chengdu, 2010:1-4. [40]Wu Huachun, Wang Ziyan, Hu Yefa. Development of Small Wind Generator Based on Hybrid Magnetic Bearing[C]//Asia-Pacific Power and Energy Engineering Conference. Wuhan, 2009:884-887. [41]NanChyuan T, Chiang Chaowen, Wang Bailu. Enhanced Efficacy of Kinetic Power Transform for High-speed Wind Field[C]//World Academy of Science, Engineering and Technology.Paris, 2010: 603-608. |
[1] |
TUN Fu-Chao, TUN Bai-Hu, ZHANG Xiu-Hua.
Numerical Simulation of Heat Transfer Performance of Paraffin Thermal-Sensitive Valve
[J]. J4, 201016, 21(16): 1921-1926.
|
[2] |
LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao.
Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism
[J]. J4, 201016, 21(16): 1926-1931.
|
[3] |
LIU An-Beng, LIU Ji-Chun.
Study on a Large-scale Scanning Three-dimensional Lens Structure of IPC-208B AFM
[J]. J4, 201016, 21(16): 1936-1940.
|
[4] |
DIAO Jin-Chao, WANG Bang-Feng, MAO Chang-Wei, NING Su-Juan.
Research on Tensile Deformation and Strain of Composite Corrugated Skin
[J]. J4, 201016, 21(16): 1959-1963.
|
[5] | SU Yonglei, ZHANG Zhifei. Integrated Casting Triangular Beam Lightweight Improving with Multi-performance Constraints of Body Systems [J]. China Mechanical Engineering, 2024, 35(04): 691-699. |
[6] | WEN Zhiwei, LOU Junqiang, CHEN Tehuan, CUI Yuguo, WEI Yanding, LI Guoping. Vibration Mimicking Fish Body Wave and Flow Distribution of Underwater Flexible Structure with Resonant Actuation of Macro Fiber Composites [J]. China Mechanical Engineering, 2024, 35(03): 405-413. |
[7] | LI Rongqi, YAN Tao, HE Zhicheng, MI Dong, JIANG Chao, ZHENG Jing. A Topology Optimized Design Method for High-performance Structures with Fluid-thermal-mechanics Coupling [J]. China Mechanical Engineering, 2024, 35(03): 487-497. |
[8] | XU Zuolin, HUANG Chuanzhen, LIU Huanlian, LIU Dun. Coating Technology and Mechanism of Modified Diamond Powder by Surface Coating of WC Powders [J]. China Mechanical Engineering, 2024, 35(02): 208-214. |
[9] | HUANG Yun, HUANG Jianchao, XIAO Guijian, LIU Shuai, LIN Ouchuan, LIU Zhenyang. Research Progresses of Superhydrophobic Surface Processing Technology and Abrasion Resistance [J]. China Mechanical Engineering, 2024, 35(01): 2-26. |
[10] | SHEN Minmin, SHI Rui, GUO Pengfei, YANG Yang, YANG Xiaodong, YANG Jihou. Study on Vibration and Fatigue of Distributed Connection Structures of Reusable Aircrafts [J]. China Mechanical Engineering, 2024, 35(01): 45-55. |
[11] | ZHANG Zhen, GUO Ce, HU Caiji, ZHENG Wei. Research on Self-repairing Structure Design and Repair Performance Based on Additive Manufacturing Technology [J]. China Mechanical Engineering, 2024, 35(01): 144-151. |
[12] | CHEN Junxiang, KONG Xiangdong, XU Kelong, AI Chao, . Comprehensive Performance Optimization of High Pressure Threaded Plug-in Relief Valves [J]. China Mechanical Engineering, 2023, 34(24): 2909-2919,2926. |
[13] | GAO Song, SUN Yingli, LI Qihan, YING Liang, HAO Zhaopeng, ZHANG Bangcheng. Multi-point 3D Hot Stretch-Bending Process of Titanium Alloy Profiles and Their Microstructure Evolution [J]. China Mechanical Engineering, 2023, 34(24): 2986-2995,3014. |
[14] | YAN Dinghu, ZHAO Jianshe, ZHANG Changhao, GAO Weizheng, ZHU Yin, . Flow Field Design and Experimental Research of ECM of Array Spherical Groove Structures with Variable Cross-sections [J]. China Mechanical Engineering, 2023, 34(23): 2824-2831. |
[15] | YI Jun, YI Tao, CHEN Bing, DENG Hui, ZHOU Wei, . Modeling and Experimental Research of Ground Workpiece Surface Topography after Grinding with Structured Grinding Wheels [J]. China Mechanical Engineering, 2023, 34(22): 2711-2720. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||