Study on EHL Performance for a Misaligned Logarithmic Profile Roller

Abstract

Abstract:

EHL performance for a misaligned logarithmic profile roller was studied. It is concluded that the contact area appears a large and small area under misaligned operating conditions. At the large area, pressure will rise and filmthickness will drop down, while pressure and filmthickness change in the opposite direction at the small area. With the increase of the misaligned angle, the trends of misalignment become dominant, and with the increase of length-radius ratio for a fixed misaligned angle, the effects of misalignment become notable. A larger crowning value can weaken the effects of misalignment. Therefore, a larger crowning value can be given in the crowning design under misalignment working conditions.

Key words: elastohydrodynamic lubrication(EHL), finite line contact, logarithmic profile roller, misalignment

摘要：

针对工程上滚子摩擦副偏斜的问题，研究了对数滚子偏斜时的弹流润滑特性。研究表明，偏斜后接触区出现大端和小端，大端处的压力增大而膜厚减小，小端处的压力减小而膜厚增大，并且这一趋势随着偏斜角的增大而趋于明显。偏斜现象总体上将恶化滚子的润滑状态。在同样的偏斜角下，滚子长径比越大，偏斜的影响越显著。适当增大对数滚子的凸度量可减弱偏斜现象的影响，因此，对于易发生偏斜的工况，设计时可适当增大滚子凸度量以补偿偏斜因素的影响。

关键词: 弹流, 有限长线接触, 对数滚子, 偏斜

CLC Number:

TH117.2

SUN Gao-Xiang-1, HUA Tong-Shu-2, CHEN Xiao-Yang-3. Study on EHL Performance for a Misaligned Logarithmic Profile Roller[J]. China Mechanical Engineering, 2013, 24(5): 650-653.

孙浩洋1, 华同曙2, 陈晓阳3. 对数滚子偏斜时的弹流润滑研究[J]. 中国机械工程, 2013, 24(5): 650-653.

References

[1]Liu X L, Yang P R. Analysis of the Thermal Elastohydrodynamic Lubrication of a Finite Line Contact[J]. Tribology International, 2002, 35(3): 137-144.
[2]孙浩洋, 陈晓阳, 杨沛然. 相交圆弧修形滚子的重载热弹流研究[J]. 机械工程学报, 2004, 40(7): 99-104.
Sun Haoyang，Chen Xiaoyang, Yang Peiran. Thermal Elastohydrodynamic Lubrication of Cylindrical Rollers with Crown Profiled Ends at Heavy Load[J]. Chinese Journal of Mechanical Engineering, 2004, 40(7): 99-104.
[3]杨萍, 杨沛然, 刘晓玲. 圆锥滚子的等温弹流润滑数值分析[J]. 摩擦学学报, 2005, 25(5): 456-460.
Yang Ping, Yang Peiran, Liu Xiaoling. Numerical Analysis of Isothermal EHL for Tapered Roller[J]. Tribology, 2005, 25(5): 456-460.
[4]马家驹, 徐文, 陈晓阳. 滚子摩擦副弹流特性及其应用Ⅱ.工程对数滚子的弹流数值解[J]. 摩擦学学报, 2000, 20(1): 63-66.
Ma Jiaju, Xu Wen, Chen Xiaoyang. EHL Properties of Roller Contacts and Its Application Part Ⅱ: a Numerical Analysis of EHL for Engineering Logarithmic Roller[J]. Tribology, 2000, 20(1):63-66.
[5]孙浩洋, 陈晓阳, 刘春浩, 等. Lundberg对数滚子的热弹流特性及其凸度量的修正[J]. 摩擦学学报, 2008, 28(1): 68-72.
Sun Haoyang，Chen Xiaoyang, Liu Chunhao, et al. Study on Thermal EHL Performance of Lundberg Profile Rollers and the Modification of Its Crowning Value[J]. Tribology, 2008, 28(1):68-72.
[6]孙浩洋,陈晓阳,张宏信.对数滚子的热弹流凸度量设计研究[J].摩擦学学报,2010,30(6):567-571.
Sun Haoyang，Chen Xiaoyang, Zhang Hongxin. Study on the Crowning Design for the Logarithmic Profile Roller according to Thermal EHL Theory[J]. Tribology, 2010, 30(6): 567-571.
[7]毛月新，沈学瑾，陈晓阳，等.偏载滚子轴承的接触应力分布计算及其滚子凸度设计[J]. 中国机械工程，2009, 20(16): 1919-1922.
Mao Yuexin, Shen Xuejin, Chen Xiaoyang, et al. Study on Contact Stress Distribution of Roller Bearings and Roller Profile Design under Misaligned Loads[J]. China Mechanical Engineering, 2009, 20(16): 1919-1922.
[8]Kushwaha M, Rahnejat H, Gohar R. Aligned and Misaligned Contacts of Rollers to Races in Elastohydrodynamic Finite Line Conjunctions[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2002, 216(11): 1051-1070.
[9]Liu Xiaoling, Yang Ping, Yang Peiran. Analysis of the Lubricating Mechanism for Tilting Rollers in Rolling Bearings[J].Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011,225:1059-1070.
[10]孙浩洋. 凸度滚子的稳态热弹流设计和动态等温特性研究[D]. 上海: 上海大学, 2005.

[1]	LI Biao1;SUN Jun2;ZHU Shaoyu2;FU Yangyang2;MIAO Enming3;LI Yunqiang4;ZHU Guixiang4. Lubrication Analysis of Plain Journal Bearings Considering Axial Motion of Journal [J]. China Mechanical Engineering, 2019, 30(18): 2150-2155,2163.
[2]	SHEN Jinlong1;XUE Zhengtang2;HENG Chuanfu2;LIU Xiaojun1. Elastic Deformations of Surface under EHL Point Contact [J]. China Mechanical Engineering, 2019, 30(14): 1696-1702,1712.
[3]	Guo Wei, Xu Xiaobin, Zhang Wu, Lu Zhengxiong. Analysis of Wire Rope Ring's Axial Misalignment in WR-CVT [J]. China Mechanical Engineering, 2016, 27(23): 3162-3166.
[4]	Chen Hong, Lei Wenping, Chen Lei, Han Jie. A Novel Quantitive Calculation Method of Dynamic Misalignment in Rotor Systems [J]. China Mechanical Engineering, 2016, 27(17): 2379-2383.
[5]	He Jingliang, He Changran, Wu Xutang, Chen Yong, . Analysis of Influences of Gearbox Flexibility on Dynamic Characteristics [J]. China Mechanical Engineering, 2015, 26(15): 2010-2015.
[6]	Liao Zhongkun, Chen Guo, Wang Haifei. Effects of Gear Coupling on Aero-engine Vibration Characteristics [J]. China Mechanical Engineering, 2015, 26(10): 1312-1319.
[7]	SHEN Tu-Liu-Fang-1, SUN Cheng-Long-2, GONG Zun-Guo-2. Study on Angular Stiffness of a Laminated Membrane Coupling [J]. China Mechanical Engineering, 2013, 24(14): 1897-1901.
[8]	SUN Gao-Xiang-1, ZHANG Yan-Beng-1, HUA Tong-Shu-2. Study on Thermal EHL for a Spherical Roller [J]. China Mechanical Engineering, 2012, 23(24): 2972-2975.
[9]	SUN Gao-Xiang-1, GUAN Dian-Zhu-1, HUA Tong-Shu-2. #br# Study on Influence of Crowning Parameters on EHL Performance of Cylindrical Rollers [J]. China Mechanical Engineering, 2012, 23(16): 1982-1984,1990.
[10]	LIU Jian-Beng-1, 2, ZHANG Xin-Xi-1, GU Qiang-Han-2, XU Chun-Zhan-2. Effects of Rheological Model on Elastohydrodynamic Film Thickness for Shear-thinning Lubricants [J]. China Mechanical Engineering, 2011, 22(20): 2415-2418.
[11]	WANG Shi-Long, FENG Chi-Heng, LEI Song, XIAO Gong. Effect of Time-varying Friction Coefficient on Dynamics of Spiral Bevel Gears [J]. China Mechanical Engineering, 2011, 22(2): 148-152.
[12]	He Zhixian, ;Gui Changlin;Li Zhen, ;Sun Jun. Multidisciplinary Coupling Analysis on Shaft-bearing System Considering Misalignment Caused by Shaft Deformation [J]. J4, 2008, 19(3): 321-327.
[13]	Sun Jun;Wang Zhenhua;Gui Changlin; Liu Jianglin. Elastohydrodynamics Lubrication Analysis of Misaligned Journal Bearing Considering Surface Roughness [J]. J4, 2008, 19(18): 0-2165.
[14]	Fang Zongde;Cao Xuemei;Zhang Jinliang. Inverse Evaluation of Equivalent Misalignment under Real Operating Mode and Redesign of Aviation Spiral Bevel Gears [J]. J4, 2007, 18(24): 3001-3005.