Dynamic Characteristics of Gear Transmission System Subjected to Random Internal and External Excitation

Abstract

Abstract:

A nonlinear dynamic model of spur gear pair system was developed with consideration of time-varying mesh stiffness and backlash. The fluctuation of transmission error and external load were treated as random variables, then, the nonlinear dynamic model of spur gear pair system was solved using the numerical emulation method. The statistical properties of vibration displacement and dynamic engaging force of gear pairs were obtained through the statistics analysis of the simulation results. The statistic analyses show that: the random fluctuation of external excitation have a greater impact on the dynamic response of gear system than the random fluctuation of transmission error. The instability of vibration amplitude and dynamic meshing force of the system increases with the increase of the degree of dispersion of transmission error and external excitation.

Key words: random, internal and external excitation, gear system, dynamic characteristics, influence

摘要：

考虑时变啮合刚度、齿侧间隙等因素的影响，建立了单对齿轮系统纯扭转非线性动力学模型。将齿轮综合传递误差波动和外部载荷作为随机变量，利用数值仿真方法对系统模型进行了求解，通过统计分析得到了系统各响应量和动态啮合力的统计特征。结果表明:外部激励的随机性对齿轮系统振幅和动态啮合力的影响比综合传递误差波动随机时明显;综合传递误差及外部激励随机波动离散程度的增加会导致系统振幅和动态啮合力不稳定性加剧。

关键词: 随机, 内外激励, 齿轮系统, 动态特性, 影响

CLC Number:

TH132

CHEN Hui-Chao-1, TUN Xiao-Ling-1, 2, QIN Da-Tong-1, YANG Jun-1. Dynamic Characteristics of Gear Transmission System Subjected to Random Internal and External Excitation[J]. China Mechanical Engineering, 2013, 24(4): 533-537.

陈会涛1, 吴晓铃1, 2, 秦大同1, 杨军1. 随机内外激励对齿轮系统动态特性的影响分析[J]. 中国机械工程, 2013, 24(4): 533-537.

References

[1]Kahranman A,Singh R. Non- linear Dynamics of aSpur Gear Pair[J]. Journal of Sound and Vibration,1990,142(1):49-75.
[2]Kahranman A, Singh R. Interactions betweenTime- varying Mesh Stiffness and Clearance Non-linearities in a Geared System[J]. Journal of Soundand Vibration, 1991,146(1): 135-156.
[3]Kahranman A,Singh R. Non-linear Dynamics of aGeared Rotor-bearing System with Multiple Clear-ances[J]. Journal of Sound and Vibration,1991,144(3):469-506.
[4]Liu Gang,Parker R G. Impact of Tooth Frictionand Its Bending Effect on Gear Dynamics[J]. Jour-nal of Sound and Vibration, 2009 , 320 ( 6 ) : 1039 -1063.
[5]Eritenel T,Parker R G. Computational NonlinearVibration Analysis of Gear Pairs Using a Three -dimensional Model[C]//ASME 2009 InternationalDesign Engineering Technical Conferences andComputers and Information in Engineering Confer-ence. San Diego,CA,USA,2009 : 149-165.
[6]张锁怀[1],沈允文[1],丘大谋[2].齿轮耦合的转子轴承系统的不平衡响应[J].机械工程学报,2002,38(6):51-55.
[7]郜志英[1],沈允文[1],董海军[1],刘梦军[1].齿轮系统周期运动稳定性研究[J].中国机械工程,2005,16(9):757-760.
[8]陈安华[1],罗善明[1],王文明[1],郭迎福[1],刘德顺[1].齿轮系统动态传递误差和振动稳定性的数值研究[J].机械工程学报,2004,40(4):21-25.
[9]苏程[1],尹朋朋[1].齿轮系统非线性动力学特性分析[J].中国机械工程,2011,22(16):1922-1928.
[10]Wang Y, Zhang W J. Stochastic Vibration Modelof Gear Transmission Systems ConsideringSpeed - dependent Random Errors[J], NonlinearDynamics, 1998,17(2) : 187-203.
[11]刘梦军[1],沈允文[1],董海军[1].随机外激励下齿轮非线性系统的全局分析[J].中国机械工程,2004,15(13):1182-1185.
[12]陈思雨[1],唐进元[1].间隙对含摩擦和时变刚度的齿轮系统动力学响应的影响[J].机械工程学报,2009,45(8):119-124.
[13]卢剑伟[1],曾凡灵[1],杨汉生[2],刘梦军[3].随机装配侧隙对齿轮系统动力学特性的影响分析[J].机械工程学报,2010(21):82-86.
[14]Chen Huitao, Wu Xiaoling,Qin Datong,et al.Effects of Gear Manufacturing Error on the Dy-namic Characteristics of Planetary Gear Trans-mission System of Wind Turbine [J]. AppliedMechanics and Material,2011,86 : 518-522.

[1]	SHEN Xiaoyan;DING Jiawei;YU Jing;LI Dongsheng. Research on Normal Random Micro-vibration of Restrictors in Ultra-precision Gas Static Pressure Systems [J]. China Mechanical Engineering, 2020, 31(20): 2429-2436.
[2]	TENG Ruipin1;SONG Xiaolin1;LIU Guoyun2;ZENG Junwei2. Research on Fatigue Damage of Automobile Coil Springs under Actions of Two Demensional Random Loads [J]. China Mechanical Engineering, 2019, 30(21): 2590-2597.
[3]	ZHAO Youqun;BAI Yiqiang;YE Chao;DENG Yaoji;XU Han;WANG Qiuwei. Study on Static and Dynamic Characteristics of Mechanical Elastic Wheels [J]. China Mechanical Engineering, 2019, 30(19): 2306-2312.
[4]	XIE Miao;LI Xiaojing. Multi-objective Optimization Design of Support Cylinders for Excavation and Anchor Combined Units [J]. China Mechanical Engineering, 2019, 30(16): 1976-1981.
[5]	ZENG Guang1,2，3;DUAN Minfeng1，2;NI Bingyu1，2;JIANG Chao1，2. Non-random Vibration Analysis of Mechanical Arm Systems [J]. China Mechanical Engineering, 2019, 30(10): 1142-1149.
[6]	LI Chunfu1;XI Junqiang2;LIU Chunying3. Analyses and Control of Influence Factors for Multi-plate Wet Clutches in Fast Oil Filling Processes [J]. China Mechanical Engineering, 2019, 30(05): 513-518.
[7]	ZHU Ge;DONG Shimin;ZHANG Weiwei;ZHANG Junjie;ZHANG Chao. Variable Stiffness Spring Reciprocating Pump Poppet Valves and Their Dynamic Characteristic Simulation [J]. China Mechanical Engineering, 2018, 29(24): 2912-2916.
[8]	SONG Shouxu, WANG Wei, KE Qingdi, QIU Quan. Design Method of Predecisional Remanufacturing Based on Component Structure Coupling Relationship [J]. China Mechanical Engineering, 2018, 29(21): 2521-2526,2538.
[9]	WANG Liandong1;LIU Chao1,2;LIU Heng1;WANG Xiaodi3;WANG Zhipeng1. Effects of Mandrel Diameters on Large Deformation Pushing-pulling Necking [J]. China Mechanical Engineering, 2018, 29(17): 2131-2136.
[10]	LI Cao;SHANG Xianyang;ZHOU Xin;LENG Yue. Study on Influence Factors of Connection Stiffness of Rocket Structure [J]. China Mechanical Engineering, 2018, 29(16): 1947-1951.
[11]	LU Congda;XUE Hao;WU Huaping;WEN Donghui. Flow and Mass Transfer Characteristics in Random Roughness Surface Microchannels [J]. China Mechanical Engineering, 2018, 29(12): 1414-1420.
[12]	CHEN Bozhi;LU Liang;LEI Xinyu;ZHAO Ping . Simultaneous Obstacle-avoidance Motion Planning Approach for Dual Arm Robots Based on Improved RRT Algorithm [J]. China Mechanical Engineering, 2018, 29(10): 1220-1226.
[13]	TENG Ruipin;SONG Xiaolin. Research on Fatigue Life under Two Demension Random Stresses [J]. China Mechanical Engineering, 2017, 28(24): 3017-3023.
[14]	YU Qiwei1;IAO Ying1;IN Jing1;U Xinsheng1;ANG Qinglin1;HANG Fei2. Feature Extraction and Correlation Model Construction of Online Product Reviews and Its Applications [J]. China Mechanical Engineering, 2017, 28(22): 2714-2721.
[15]	AN Xingqiang1;GU Zhengqi1,2;MA Xiaokui1;ZHANG Sha1;MI Chengji3. Fatigue Life Prediction Method Based on Weld Quality Parameter Interval Model [J]. China Mechanical Engineering, 2017, 28(21): 2639-2645.