Research on Dynamics during Catapult Takeoff of Carrier-based Aircraft

Abstract

Abstract:

A flex-rigid virtual prototype model was built in LMS Virtual. lab to simulate the catapult launch process of carrier-based aircraft.A pair of flex point curve joints were used to simulate the movements of the piston rod and the outer tube.The catapult security and dynamics response of the target aircraft were analyzed.Simulation results show that:the target aircraft meets the criteria requirements,and can take off safely;the coupling of pitch and heave will increase subsidence;the dynamic response caused by separation is related to the size and decay rate of separate load. 

Key words: carrier-based aircraft, deck motion, catapult takeoff, Flexible landing-gear, dynamics response

摘要：

基于多体动力软件LMS Virtual.lab建立了某型飞机弹射起飞的刚柔耦合虚拟样机模型，使用一对点和柔性曲线约束副来模拟活塞杆和外筒的运动，分析了目标飞机的弹射起飞安全性及弹射过程中飞机的动力学响应。仿真表明：目标飞机的舰首下沉量能够满求，可以安全起飞。纵摇和垂荡的耦合会使飞机舰首下沉量
增大;分离时的动态响应情况与分离载荷的大小和衰减速度有关。


关键词: 舰载飞机, 航母运动, 弹射起飞, 柔性起落架, 动力学响应

CLC Number:

DUO Cheng-Guo, HU Feng, NIE Hong. Research on Dynamics during Catapult Takeoff of Carrier-based Aircraft[J]. China Mechanical Engineering, 2013, 24(4): 522-527.

隋成国, 许锋, 聂宏. 舰载机弹射起飞动力学虚拟试验研究[J]. 中国机械工程, 2013, 24(4): 522-527.

References

[1]金长江[1],洪冠新[2].舰载机弹射起飞及拦阻着舰动力学问题[J].航空学报,1990,11(12):B534-B542.
[2]Wang W J ,Qu X J?Guo L L. Multi Agent Based Hi-erarchy Simulation Models of Carrier Based AircraftCatapult Launch [J]. Chinese Journal of Aeronau-tics,2008,21(3) =223-231.
[3]沈强[1,2],黄再兴[1].舰载机起落架突伸性能参数敏感性分析[J].航空学报,2010(3):532-537.
[4]郑本武.前起落架突伸对舰载飞机弹射起飞航迹的影响[J].南京航空航天大学学报,1994,26(1):27-33.
[5]王大海,苏彬.舰面运动对弹射起飞特性的影响[J].飞行力学,1994,12(1):57-63.
[6]贾忠湖,高永,韩维.航母纵摇对舰载机弹射起飞的限制研究[J].飞行力学,2002,20(2):19-21.
[7]胡淑玲,林国锋.前起落架突伸对舰载机起飞特性的影响[J].飞行力学,1994,12(1):28-34.
[8]郑本武.舰载飞机弹射起飞参数的优化研究[J].飞行力学,1995,13(4):23-28.
[9]严重中,刘航.舰载飞机弹射滑跑起飞特性计算[J].飞行力学,1996,14(3):50-55.
[10]刘星宇[1],许东松[1],王立新[1].舰载飞机弹射起飞的机舰参数适配特性[J].航空学报,2010(1):102-108.
[11]蒋维清.船舶原理[M].北京:人民交通出版社,1979.
[12]刘应中,缪国平编.船舶在波浪上的运动理论[M],1987:227.
[13]Naval Air Systems Command Department of theNavy. MIL - DTL - 85110B General Requirementfor Detail Specification, Bar,Repeatable ReleaseHoldback(RRHB) , Aircraft Launching[S]. 1997.
[14]Naval Air Systems Command Department of theNavy. MIL - L - 22589D Military SpecificationLaunching System. Nose Gear Type, Aircraft[S].1991.
[15]Naval Air Systems Command Department of theNavy. MIL - STD - 2066 Catapulting and Arrest-ing Gear Forcing Functions for Aircraft StructuralDesign[S]. 1981.
[16]Naval Air Systems Command Department of theNavy. MIL-A-8863C Military Specification Air-plane Strength and Rigidity Ground Loads for Na-vy Acquired Airplanes[S]. 1993.
[17]Walls J H. An Experiment Study of Orifice Coeffi-cients ,Internal Strut Pressure, and Loads on aSmall Oelo - pneumatic Shock Strut[R]. LangleyField, VA,USA: Langley Aeronautical Laborato-ry, 1955.
[18]航空航天工业部科学技术委员会.飞机起落架强度设计指南[M].重庆:四川科学技术出版社,1983.
[19]张明[1],聂宏[1],朱如鹏[1],熊俊杰[2].基于虚拟样机技术的飞机地面运动多学科协同仿真[J].中国机械工程,2010(10):1194-1199.
[20]柳刚[1],聂宏[1].基于能量法的飞机拦阻动力学分析[J].中国机械工程,2009,10(4):450-454.
[21]《飞机设计手册》总编委会.飞机设计手册:起飞着落系统设计[M].北京:航空工业出版社,2002.