#br#
#br#
Research on Product Form Design Computer Aided System Based on Multi-constraints

Abstract

Abstract:

In the process of industrial design, in order to match the consistency from concept stage to manufacturing,product design must suffer various constraints. And in order to improve design efficiency,the definition of product modeling design based on material, structure, technology and other constraints was proposed. Through the research of a variety of constraint factors, a prduct modeling design constraint set was constructed. And the product design process was discussed. Based on this theory, a computer aided system was established, the feasibility of modeling design and processing technology were verified based on design example.

Key words: modeling design;multi-constraint, production , process, parametrization;computer aided , system

摘要：


在工业设计中,产品形态设计为了满足从概念设计阶段到生产制造环节的一致性,要受到多种约束的制约。为了提高设计效率,提出了基于材料、结构、工艺等约束因素的产品形态设计概念,通过对各种约束因素的研究,建立了产品形态设计约束集,分析了多约束条件下的产品设计流程,以此为基础,应用Pro/E二次开发和数据库技术,开发了产品形态设计计算机辅助系统,通过设计实例的形态设计和加工工艺验证了该系统的可行性。


关键词: 形态设计, 多约束, 工艺, 参数化, 辅助系统

CLC Number:

TP391

LI Bo, TU Duo-Fu, CHU Jian-Jie, YANG Yan-Pu, DU Wei, DU He-Min. #br# #br# Research on Product Form Design Computer Aided System Based on Multi-constraints[J]. China Mechanical Engineering, 2013, 24(3): 340-345.

李博, 余隋怀, 初建杰, 杨延璞, 杜微, 杜鹤民. 多约束下的产品形态设计计算机辅助系统研究[J]. 中国机械工程, 2013, 24(3): 340-345.

References

[1]陈汉青．产品设计[M]．武汉：华中科技大学出版社，2005．
[2]王伟伟，余隋怀，杨刚俊，等．约束驱动的产品形态概念设计智能优化模型研究[J]．中国机械工程，2011，15：1770-1775．
Wang Weiwei,Yu Suihuaii, Yang Gangjun, et al.Research on Intelligent Optimization Model for Constraint-driven Product Conceptual Design[J].China Mechanical Engineering,2011, 22(15): 1770-1775.
[3]Mohannad M, Manohar D, Cheok Ka C. Modeling and Simulation of an Advanced Intelligent Restraint System[C]//2009 IEEE International Systems Conference Proceedings. Vancouver, BC, Canada: ISCP, 2009:333-337
[4]Sun Liqing, Lin Yi, Sun Fengchun. Simulation of Restraint System Performance upon the Occupant’s Response during Impact[J]. Journal of Beijing Institute of Technology,1999,6:207-213.
[5]李婕静．TCL波轮洗衣机造型设计工艺实现的应用研究[D]．北京：清华大学，2006．
[6]John W. Creswell. Research Design Qualitative, Quantitative, and Mixed Methods Approaches[M].Thousand Oaks,Calif. :Sage Publications Inc.,2008.
[7]孟祥旭，徐延宁．参数化设计研究[J]．计算机辅助设计与图形学学报，2002，14(11)：1086-1090.
Meng Xiangxu,Xu Yanning.A Survey of the Research Works on Parametric Design[J]. Journal of Computer-aided Design & Computer Graphics,2002, 14(11):1086-1090.
[8]丁炜．家电产品的三维造型设计方法的研究[J]．机械开发，1999(1)：37-40.
Ding Wei. Research on Three-dimensional Modeling Design Method for Household Electrical Appliances[J]. Machinery Development, 1999(1): 37-40.
[9]郑飞．基于Pro/E的网络标准件库系统的研究与开发[D]．武汉:华中科技大学，2006．
[10]蔡波，陆长德，余隋怀，等．自顶向下的计算机辅助工业设计几何建模研究[J]．计算机辅助设计与图形学学报，2001(12)：1129-1132.
Cai Bo, Lu Changde, Yu Suihuai, et al.Research on Top-Down Geometric Modeling in Computer Aided Industrial Design[J]. Journal of Computer-aided Design & Computer Graphics,2001(12): 1129-1132.
[11]Zhou Q, Chinb K S, Yarlagaddaa P K D V. Internet-based Intensive Product Design Platform Forproduct Design[J]. Knowledge Based System, 2003, 16: 7-15.
[12]张毅，郭钢．产品设计中多维工程约束的研究[J]．机械工艺师，2000(9)：52-54.
Zhang Yi, Guo Gang. Research on Multidimensional Engineering Constraints for Product Desingn[J]. Mechnical Process Engineer, 2000(9):52-54.
[13]吴斌．基于Pro/E平台的标准件库系统研究及管理工具开发[D]．武汉：华中科技大学，2004．

[1]	XU Zheng-E, XU Hong-Jun, FU Yu-Can. Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler [J]. J4, 201016, 21(16): 1977-1981.
[2]	TUN Jian, Jocher Dietrich, LI Jiang. Research on Sheet Metal Digital Incremental Forming Technology without Support [J]. J4, 201016, 21(16): 2002-2005,2015.
[3]	YANG Feng, LUO Shijie, YANG Jianghong, WANG Yingjun, . A GPU-accelerated High-efficient Multi-grid Algorithm for ITO [J]. China Mechanical Engineering, 2024, 35(04): 602-613.
[4]	ZHANG Jinyang, XU Weichun, WANG Xiaohan, JIANG Xiaohui, GAO Shan. Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys [J]. China Mechanical Engineering, 2024, 35(04): 624-635.
[5]	LI Yingchun, NIE Aonan, YANG Mingxuan, ZHU Dingkang, QIU Ming, YANG Gengsheng. Research on Thermal Characteristics of Auxiliary Bearing in AMBs and Friction Reduction Design [J]. China Mechanical Engineering, 2024, 35(04): 646-655.
[6]	ZHANG Meng, ZHANG Songlin, LIU Yuwei, LIU Shicheng, FAN Pengju. Optimal Design of Piezo-based Actuated Systems in Tunable Diode Lasers [J]. China Mechanical Engineering, 2024, 35(04): 656-665.
[7]	LIANG Yongbin, FU Guang, LIN Zhigui, HE Zhicheng, ZHANG Jialuo, CHEN Tao. Design of Lane Keeping Assist Systems Based on Improved Preview Control Model [J]. China Mechanical Engineering, 2024, 35(03): 548-558.
[8]	LUO Longjun, HE Xiaofeng, LIU Xun, ZHANG Qiaxuan, HUANG Hewen. Design of Experimental Device for Sealing Performance of Hydraulic Pump Plungers [J]. China Mechanical Engineering, 2024, 35(02): 229-235.
[9]	ZHANG Wenjun, WANG Wenqi, ZHANG Xiaodong, LIN Wei, ZHANG Yandong, BAI Zhenhua, . Comprehensive Thickness Control Technology of 1180 MPa Grade Ultra-high Strength Steels in Cold Tandem Rolling [J]. China Mechanical Engineering, 2024, 35(02): 347-353，370.
[10]	HUANG Yun, HUANG Jianchao, XIAO Guijian, LIU Shuai, LIN Ouchuan, LIU Zhenyang. Research Progresses of Superhydrophobic Surface Processing Technology and Abrasion Resistance [J]. China Mechanical Engineering, 2024, 35(01): 2-26.
[11]	CHEN Zhongyuan, CHEN Ke, LIU Hao, OUYANG Xiaoping, . Low-speed Dead Zone Adaptive Compensation Method for Drive Units of Supernumerary Robotic Limbs [J]. China Mechanical Engineering, 2024, 35(01): 56-66.
[12]	LI Kunhang, ZHANG Siqi, WU Wei, HU Mingzhuo, SUN Yaling, XIONG Xin, HUANG Hong. Multi-field Coupling Simulation and Analysis for Resistance Spot Welding of Three-layer Dissimilar Unequal-thickness Steels [J]. China Mechanical Engineering, 2023, 34(24): 2996-3003.
[13]	LIU Xiaobao, YAN Qingxiu, YI Bin, YAO Tingqiang, GU Wenjuan. Optimization of Process Parameters in Process Manufacturing Based on Ensemble Learning and Improved Particle Swarm Optimization Algorithm [J]. China Mechanical Engineering, 2023, 34(23): 2842-2853.
[14]	ZHANG Dingge, WANG Liyong, LI Le, ZHANG Jinle. Research on Dynamic Modeling and Solving Method of Integrated Transmission System under Time-varying Conditions [J]. China Mechanical Engineering, 2023, 34(22): 2665-2673.
[15]	ZHANG Xiao, CHI Maoru, XIE Yuchen, WANG Huansheng, CAI Wubin, DAI Liangcheng. Optimization of Variable Gauge Train Wheel Treads Based on Reverse Design Method [J]. China Mechanical Engineering, 2023, 34(22): 2746-2757.

#br# #br# Research on Product Form Design Computer Aided System Based on Multi-constraints

多约束下的产品形态设计计算机辅助系统研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics