[1]刘缙.平板玻璃的加工[M].北京:化学工业出版社,2008.
[2]陈金身, 智红梅. 一种玻璃抛光用新型抛光盘的研究[J]. 金刚石与磨料磨粒工程, 2012, 33(3): 78-81.
Chen Jinshen, Zhi Hongmei. Research on New Polis-hing Disk for Glass Polishing[J]. Diamond Abrasives Engineering, 2012, 33(3): 78-81.
[3]俞红祥 ,徐洪, 袁巨龙. 基于接触力控制的抛光轮磨损在线补偿策略研究[J]. 仪器仪表学报, 2010(5): 991-997.
Yu Hongxiang, Xu Hong, Yuan Julong. Study on Online Wearing Compensation Strategy for Polishing Wheel Based on Contacting Force Control[J]. Chinese Journal of Scientific Instrument, 2010,31(5):991-997.
[4]Lai J Y, Lin K Y, Tseng S J, et al. On the Development of a Parametric Interpolator with Confined Chord Error, Feedrate, Acceleration and Jerk[J]. International Journal of Advanced ManufacturingTechnology, 2008, 37: 104-121.
[5]Dong Jinyan, Ferreira P M, Stori J A. Feedrate Optimization with Jerk Constraints for Generating Minimum-time Trajectories[J]. International Journal of Machine Tools & Manufacture, 2007, 47: 1941-1955.
[6]Rew K H, Ka C W, Kim K S. A Practically EfficientMethod for Motion Control Based on AsymmetricVelocity Profile[J]. International Journal of Advanced Manufacturing Technology, 2009, 49: 678-682.
[7]姬俊锋, 周来水, 张得礼. NURBS曲线插补过程中运动平滑处理[J]. 中国机械工程, 2006, 17(21): 2225-2228.
Ji Junjeng, Zhou Laishui, Zhang Deli. Motion Smoothing Implementation for NURBS Curve Interpolation[J]. China Mechanical Engineering, 2006, 17(21): 2225-2228.
[8]赵巍, 王太勇, 万淑敏. 基于NURBS曲线的加减速控制方法研究[J]. 中国机械工程, 2006,17(1): 1-3.
Zhao Wei, Wang Taiyong, Wan Shumin. Acceleration-deceleration Control Method Based on NURBS Curve[J]. China Mechanical Engineering, 2006, 17(1): 1-3.
[9]Yong T, Narayanaswami R. A Parametric Interpolator with Confined Chord Error, Acceleration and Deceleration for NC Machining[J]. Computer-Aided Design, 2003, 35: 1249-1259.
[10]Piegl L, Tiller W. The NURBS Book[M]. Berlin:Springer-Verlag, 1996.
[11]刘军强, 高佳宏, 李言. 规则曲线和曲面的NURBS表示[J]. 西安工业学院学报, 2004, 24(4): 311-315.
Liu Junqiang, Gao Jiahong, Li Yan. The NURBS Expression of Several Characteristic Curve and Surface[J]. Journal of Xi'an Institute of Technology, 2004, 24(4): 311-315.
[11]Demirci I, Mezghani S, Mansori E. On Material Removal Regimes for the Shaping of Glass Edges: Force Analysis, Surface Topography and Damage Mechanisms[J]. Tribology Letters, 2008, 30: 141-150.
|