[1]杨固川, 于江, 陈文, 等. 大型模锻液压机机架结构分析研究[J]. 锻压技术, 2010, 35(3): 109-113.
[2]Val' kov V Y. Experience in Producing Large Forgedand Stamped Items[J]. Russion Journal of Non-ferrous Metals, 2000(7) :93-96.
[3]Lin Feng, Yan Yongnian, Wu Rendong, et al. The Developemnt of Bearing Structure in Heavy Die Forging Hydraulic Press[J]. China Metal Forming Equipment Manufacturing Technology, 2007(5): 27-31.
[4]Jin Miao, Dang Xiaochuan, Zou Zongyuan, et al. Calculation of Upper Limit Load for Assembled Frame Hydraulic Press Under Given Pre-tightened Force [J]. China Mechanical Engineering, 2012, 23(20): 2476-2480.
[5]黄学玲. 组合板框加架的预紧问题[J]. 重型机械, 1995(1): 13-15.
[6]王亚军, 黄明辉, 湛利华, 等. 组合式机架C形板与十字键接触状态研究[J]. 现代制造工程, 2009(1): 124-127.
[7]李毅波, 黄明辉. 考虑制造误差的模锻压机C形板组配顺序研究[J]. 中国机械工程, 2011, 22(20): 2442-2446.
[8]黄宁, 黄明辉, 湛利华, 等. 巨型压机C型机架的结构分析与改进[J]. 锻压技术, 2009, 34(5): 93-95.
[9]王芳芳, 湛利华, 黄明辉. 大型锻压机典型组合结构接触问题的研究[J]. 锻压技术, 2011(1): 69-72.
[10]Li Wei, Li Qing, Steven G P, et al. An Evolutionary Shape Optimization for Elastic Contact Problem Subject to Multiple Load Cases[J]. Computer Methods in Applied Mechanics and Engineering, 2005, 194(30/33): 3394-3415.
[11]王科社. 机械优化设计[M]. 北京: 国防工业出版社, 2007: 161-162. |