China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (23): 2858-2863.

Previous Articles     Next Articles

Dynamics Analysis and Control of a New Eight-wheel-legged Mobile Robot

Wang Hongmei1,2;Zhang Minglu1;Zhang Xiaojun1;Meng Guangzhu1   

  1. 1.Hebei University of Technology, Tianjin, 300130
    2.Shandong University of Technology,Zibo, Shandong,255091
  • Online:2012-12-10 Published:2012-12-21
  • Supported by:
     
    National Natural Science Foundation of China(No. 61075097);
    Hebei Provincial Natural Science Foundation of China(No. E2010000049);
    Natural Science Foundation of Tianjin(No. 12JCYBJC12100)

新型八轮腿复合移动机器人动力学分析与控制

王红梅1,2;张明路1;张小俊1;孟广柱1   

  1. 1.河北工业大学,天津,300130
    2.山东理工大学,淄博,255091
  • 基金资助:
    国家自然科学基金资助项目(61075097); 河北省自然科学基金资助项目(E2010000049); 天津市自然科学基金资助项目(12JCYBJC12100) 
    National Natural Science Foundation of China(No. 61075097);
    Hebei Provincial Natural Science Foundation of China(No. E2010000049);
    Natural Science Foundation of Tianjin(No. 12JCYBJC12100)

Abstract:

A new type of eight-wheel-legged mobile robot was designed to meet the needs of the emergency rescue system for mobile robots, which should have the ability of fast speed and terrain requirements. In the structure, this robot could change the angle among the legs to achieve attitude adjustment, and could raise wheels and legs to complete jump over, which could improve the ability of terrain through. In the control, Rolls equation was used to obtain the dynamic model of the robot. Sliding mode control was used for robot trajectory tracking. To reduce the steady-state error, switching function adopted integral type. In order to avoid chatter phenomenon, switching gain could be self-adjustment by integral form. From the simulation results, the tracking error of the robot can approach zero with fast velocity and small overshoot.

Key words: eight-wheel-legged robot, dynamics, sliding mode control, integral gain

摘要:

为了满足应急救援系统对移动机器人速度和地形适应能力的要求,设计了新型的八轮腿移动机器人。结构方面,机器人通过改变两副轮腿夹角实现姿态调整,并通过抬高轮腿结构实现越障,以此来提高地形通过能力。控制方面,利用劳斯方程建立机器人动力学模型,在利用滑模控制实现机器人轨迹跟踪过程中,为减小稳态误差,滑模控制的切换函数采用了积分形式;为了避免切换增益过大带来的抖振,利用积分增益实现切换增益的自调整。由仿真结果可知,机器人轨迹跟踪误差能以较小的超调和较快的速度趋近零。

关键词: 八轮腿机器人, 动力学, 滑模控制, 积分增益

CLC Number: