A Time Synchronous Average Method Based on Adaptive Chirplet Atomic Decomposition and Its Application in Gear Fault Diagnosis with Large Rotating Speed Variation

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (10): 1205-1212.

Previous Articles Next Articles

A Time Synchronous Average Method Based on Adaptive Chirplet Atomic Decomposition and Its Application in Gear Fault Diagnosis with Large Rotating Speed Variation

Wu Xueming;Yu Dejie;Chen Xiangmin

State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha,410082

Online:2012-05-25 Published:2012-05-30
Supported by:

National Natural Science Foundation of China（No. 50875078）;

National High-tech R&D Program of China (863 Program) （No. 2009AA04Z414）;

Research Fund for the Doctoral Program of Higher Education of China
（No. 20090161110006）

基于自适应线调频基原子分解的时域同步平均方法及其在变转速齿轮故障诊断中的应用

吴雪明;于德介;陈向民

湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082

基金资助:
国家自然科学基金资助项目(50875078);国家高技术研究发展计划(863计划）资助项目（2009AA04Z414);高等学校博士学科点专项科研基金资助项目(20090161110006);湖南大学汽车车身先进设计制造国家重点实验室自主课题(71075001)
National Natural Science Foundation of China（No. 50875078）;

National High-tech R&D Program of China (863 Program) （No. 2009AA04Z414）;

Research Fund for the Doctoral Program of Higher Education of China
（No. 20090161110006）

Abstract

Abstract:

A time synchronous average method based on adaptive chirplet atomic decomposition(ACAD) was proposed to deal with the non-stationary vibration signals of fault gears.The stationary requirements were satisfied for TSA method by resampling the signals in equal angle according to the rotating speed curve
obtained by the ACAD mthod.The SNR was improved by processing the resampled
signals with TSA method.The modulation orders of gears can be shown in the order spectrum clearly with the FFT transform, and it reveals the types of a gear's faults.Simulation and application examples proved the effectiveness of the method.

Key words: atomic decomposition, adaptive chirplet, time domain synchronous average, gear, fault diagnosis

摘要：

提出一种基于自适应线调频基原子分解(adaptive chirplet atomic decomposition,ACAD)的时域同步平均方法,并将其应用于低信噪比下变转速齿轮故障诊断。首先对齿轮振动信号进行ACAD分解估计齿轮所在轴的转速曲线;然后根据转速曲线对信号进行等角度重采样，以满足时域同步平均方法对信号周期平稳的要求;再利用时域同步平均方法对重采样信号进行处理，处理后的信号具有很高的信噪比;
最后,对其进行FFT变换,其阶次谱上非常清晰地显示齿轮的调制阶次，从而揭示齿轮的故障信息。仿真算例与应用实例证明了该方法的有效性。

关键词: 原子分解, 自适应线调频基, 时域同步平均, 齿轮, 故障诊断

CLC Number:

TUN Xue-Meng, XU De-Ge, CHEN Xiang-Min. A Time Synchronous Average Method Based on Adaptive Chirplet Atomic Decomposition and Its Application in Gear Fault Diagnosis with Large Rotating Speed Variation[J]. China Mechanical Engineering, 2012, 23(10): 1205-1212.

吴雪明, 于德介, 陈向民. 基于自适应线调频基原子分解的时域同步平均方法及其在变转速齿轮故障诊断中的应用[J]. 中国机械工程, 2012, 23(10): 1205-1212.

[1]	CHEN Li-Feng, TUN Xiao-Ling, QIN Da-Tong, XIAO Zheng-Meng. Study on Frictional Power Losses of Spur Gear [J]. J4, 201016, 21(16): 1911-1915.
[2]	LUO Ji-Sai, XU De-Ge, SHI Mei-Li. Gearbox Fault Diagnosis with Rotating Speed Fluctuation Based on SVD and Chirplet Path Pursuit Algorithm [J]. J4, 201016, 21(16): 1947-1951.
[3]	ZHENG Jinde, WANG Xinglong, PAN Haiyang, TONG Jinyu, LIU Qingyun. Rolling Bearing Fault Diagnosis Method Based on Adaptive Autogram [J]. China Mechanical Engineering, 2021, 32(07): 778-785，792.
[4]	CHEN Huanguo, LIU Peijun, YU Hang, XIAO Xue. Identification of Fault Degree of Oil Filter Blockage in Electro-hydraulic Actuator Based on an Improved PCA-SOM [J]. China Mechanical Engineering, 2021, 32(07): 799-805.
[5]	NI Hengxin, YAN Chunping, CHEN Jianlin, HOU Yuehui, CHEN Liang. Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters [J]. China Mechanical Engineering, 2021, 32(07): 832-838.
[6]	WANG Feixue, LIU Ya, ZANG Xinliang . Reverse Design and Kinematics Analysis of Reciprocating Linear Mechanisms Based on Non-circular Differential Gear Trains [J]. China Mechanical Engineering, 2021, 32(06): 697-704.
[7]	LI Congbo;ZHANG Chi;QU Shiyang;HU Zengming. Comprehensive Gear Shift Schedule of PELV Considering Road Gradients and Vehicle Loads [J]. China Mechanical Engineering, 2021, 32(03): 275-283,289.
[8]	DING Jiaxin ;WANG Zhenya ;YAO Ligang ;CAI Yongwu. Rolling Bearing Fault Diagnosis Based on GCMWPE and Parameter Optimization SVM [J]. China Mechanical Engineering, 2021, 32(02): 147-155.
[9]	YANG Luhang1;LI Baoqing1;WANG Ping2,3;WANG Jian2,3;YANG Yu1. Fault Diagnosis Method of Rolling Bearings Based on Probability Output Flexible Convex Hull [J]. China Mechanical Engineering, 2021, 32(01): 40-46.
[10]	TANG Guiji;LI Nannan;WANG Xiaolong. Fault Feature Extraction Method for Gears Based on ISSD and SVD [J]. China Mechanical Engineering, 2020, 31(24): 2988-2996.
[11]	WAN Shuting;PENG Bo;WANG Xiaolong. Early Fault Diagnosis Method of Rolling Bearings Based on DTD Transform-SCS Method [J]. China Mechanical Engineering, 2020, 31(23): 2829-2836.
[12]	HU Rui;DU Xuesong;ZHU Caichao. Design of Shaper Cutter for Precision Machining Internal Beveloid Gears [J]. China Mechanical Engineering, 2020, 31(21): 2535-2541.
[13]	LI Junliang;WANG Shilong;WANG Sibao;XIA Changjiu. Energy Consumption Model of Hobbing Machine Tools Based on Workpiece Material Removal Rate [J]. China Mechanical Engineering, 2020, 31(21): 2626-2631.
[14]	MENG Zong;LIU Zihan;LYU Meng. Fault Diagnosis for Rolling Bearings Based on Improved Singular Value Decomposition and Spectral Kurtosis [J]. China Mechanical Engineering, 2020, 31(20): 2420-2428.
[15]	WANG Zhenya;YAO Ligang. Rolling Bearing Fault Diagnosis Method Based on Generalized Refined Composite Multiscale Sample Entropy and Manifold Learning [J]. China Mechanical Engineering, 2020, 31(20): 2463-2471.

A Time Synchronous Average Method Based on Adaptive Chirplet Atomic Decomposition and Its Application in Gear Fault Diagnosis with Large Rotating Speed Variation

基于自适应线调频基原子分解的时域同步平均方法及其在变转速齿轮故障诊断中的应用

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics