Study and Trial Production of Battery Grid Continuous Casting Machine

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (1): 106-108.

Previous Articles Next Articles

Study and Trial Production of Battery Grid Continuous Casting Machine

Li Wanquan1;Gao Changyin2;Liu Jiang1;Tan Zefu1

1.Chongqing Three Gorges University, Chongqing, Chongqing, 404000

2.Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou, 450015

Online:2012-01-10 Published:2012-01-15
Supported by:

Key Technology R&D Program of Chongqing（No. CSTC, 2009AB3058）;
Henan Provincial Science and Technology Development program ( No. 092102210093)

蓄电池板栅连铸机研制

李万全1;高长银2;刘江1;谭泽富1

1. 重庆三峡学院,重庆,404000

2.郑州航空工业管理学院,郑州,450015

基金资助:
重庆市科技攻关重点项目(CSTC, 2009AB3058）；重庆市高校优秀成果转化项目(kjzh08215）；河南省科技发展计划资助项目(092102210093)
Key Technology R&D Program of Chongqing（No. CSTC, 2009AB3058）;
Henan Provincial Science and Technology Development program ( No. 092102210093)

Abstract

Abstract:

A continuous casting machine was designed herein, which had been used successfully for continuous casting battery grids. According to the characteristics of rapid solidification of molten lead in the mold during continuous casting of the grid, battery grid cave in the outer peripheral surface, molten lead passageway in the shoe, temperature control system of mold, gas shielded during the casting were designed. Trial production of continuous casting machine and test of continuous casting were carried out. The sample of grid was obtained successfully.

Key words: battery, grid, continuous casting, drum, shoe

摘要：

设计了一种蓄电池板栅连铸机,该连铸机可实现蓄电池板栅的连续铸造。针对蓄电池板栅连铸过程中铅液在模具内快速凝固结晶的特点,分别进行了动模表面连续板栅型腔结构设计、定模内部供铅结构设计、模具温度控制结构设计、浇注过程气体保护结构设计,并进行了样机试制及板栅连铸试验,获得了蓄电池连铸板栅样品。

关键词:

蓄电池, 板栅, 连铸, 动模, 定模

CLC Number:

TG291

LI Mo-Quan-1, GAO Chang-Yin-2, LIU Jiang-1, TAN Ze-Fu-1.

Study and Trial Production of Battery Grid Continuous Casting Machine

[J]. China Mechanical Engineering, 2012, 23(1): 106-108.

李万全1, 高长银2, 刘江1, 谭泽富1.

蓄电池板栅连铸机研制

[J]. 中国机械工程, 2012, 23(1): 106-108.

[1]	YANG Feng, LUO Shijie, YANG Jianghong, WANG Yingjun, . A GPU-accelerated High-efficient Multi-grid Algorithm for ITO [J]. China Mechanical Engineering, 2024, 35(04): 602-613.
[2]	LIU Dongcai, DONG Guangyu, DU Yuhong, LI Wenpeng, . Time-optimal Trajectory Planning of 6-RUS Parallel Robots Based on Grid Search Algorithm [J]. China Mechanical Engineering, 2023, 34(13): 1589-1598.
[3]	YANG Jisen, FU Hang, QIN Ziyang, ZHOU Run. Research on Complementary Double-layer Time-grid Angular Displacement Sensor [J]. China Mechanical Engineering, 2023, 34(04): 431-439.
[4]	DING Yandong, LUO Nianmeng, YANG Aodi, WANG Shuting, ZHU Haoran, XIE Xianda. Efficient Multigrid Isogeometric Topology Optimization under Bézier Element Stiffness Mapping [J]. China Mechanical Engineering, 2022, 33(23): 2801-2810.
[5]	QIN Qin, WANG Wenzhi, ZHANG Sheng, ZANG Yong. Analyses of Limit Reduction and Processing Parameters in Soft Reduction Processes of Continuous Casting [J]. China Mechanical Engineering, 2022, 33(16): 1972-1982.
[6]	ZHAO Cong, XIAO Jun, ZHOU Laishui, AN Luling. Fibre Distribution and Bending Performance of Composite Grid Stiffeners Manufactured by Automated Fibre Placement [J]. China Mechanical Engineering, 2021, 32(23): 2823-2831.
[7]	ZHAO Lijuan, WANG Yadong , WANG Bin. Analysis and Prediction of Working Performance of Shearer Spiral Drums under Coal Seam with Gangue#br# [J]. China Mechanical Engineering, 2021, 32(08): 976-986.
[8]	LIU Zhiqiang1;GU Xianan1;GUO Hao1;XI Hao1;WANG Mingqiang1;LI Junli2. A Trajectory Planning Method for Automatic Placement of Carbon n Fiber Screw Propellers [J]. China Mechanical Engineering, 2020, 31(17): 2079-2084,2094.
[9]	LI Junye1;LU Hui1;SU Ningning1;ZHANG Xinming1;ZHANG Hongwei2. Research on Quality Control of Abrasive Flow Precision Machining Nozzles Based on Large Eddy Simulation Smagorinsky Model [J]. China Mechanical Engineering, 2020, 31(10): 1169-1174.
[10]	LI Qiang1;FANG Yiming1,2;LI Jianxiong1;ZHENG Huicheng1. Nonlinear Processing for Vibration Displacement Systems of Continuous Casting Molds [J]. China Mechanical Engineering, 2019, 30(12): 1433-1440.
[11]	MAO Jun1;WANG Xin1;CHEN Hongyue1，2;ZHANG Kun1;BAI Yangxi1. Optimization Design and System Development of Shearer Drums Based on NSGA-Ⅲ Algorithm [J]. China Mechanical Engineering, 2018, 29(19): 2335-2342.
[12]	ZHOU Chao1，2;ZHANG Xingzhong1;LIU Pingfei1;GUAN Jie3. Modeling and Natural Characteristic of Non-sinusoidal Oscillator of Continuous Casting Molds [J]. China Mechanical Engineering, 2018, 29(16): 1921-1926.
[13]	WANG Hai, ZHENG Zhengyang, CAI Yingfeng, CHEN Long. Obstacle Detection Algorithm for Driverless Vehicles Based on Four-layer Lidars [J]. China Mechanical Engineering, 2018, 29(15): 1884-1889.
[14]	ZHAO Lijuan;FAN Jiayi. Shearer's Helical Drum Multi-objective Optimization Design Based on GA [J]. China Mechanical Engineering, 2018, 29(05): 591-596.
[15]	MA Zhuang1,3;FANG Yiming1,2;LI Jianxiong1;LIU Le1. Compensation Control of Vibration Displacement Systems for Continuous Casting Molds Driven by Servo Motor with Time-varying Load Torque [J]. China Mechanical Engineering, 2018, 29(03): 295-300.

Study and Trial Production of Battery Grid Continuous Casting Machine

蓄电池板栅连铸机研制

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics