Research on Testability Comprehensive Evaluation Method for Engineering Equipment

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (9): 1044-1048.

Previous Articles Next Articles

Research on Testability Comprehensive Evaluation Method for Engineering Equipment

Zhu Chunsheng;Zhang Qi;Ran Hongliang;Jiao Yumin

PLA University of Sciene and Technology, NanJing, 210007

Online:2011-05-10 Published:2011-05-17
Supported by:
National Defense Pre-research Foundation of General Armament Department

工程装备测试性综合评价方法研究

朱春生;张琦;冉红亮;焦玉民

解放军理工大学，南京，210007

基金资助:
总装预研基金资助项目
National Defense Pre-research Foundation of General Armament Department

Abstract

Abstract:

An analytical hierarchy model of testability comprehensive evaluation for engineering machines was built, and the influence weights of testability quality in different states of design were computed. The model for the assessment was founded by FCA. Based on the model, the comprehensive assessment values were computed and the evaluation results were made. A case shows that this approach can trade off the influence factors via combining the AHP with FCA, which can make a testability comprehensive evaluation effectively for engineering equipment.

Key words:

analytical hierarchy process(AHP), fuzzy comprehensive assessment(FCA), testability, comprehensive evaluation, engineering equipment

摘要：

运用层次分析法建立了工程装备的测试性综合评价影响因素分析模型，得到了不同设计阶段影响因素的组合权重;采用模糊综合评判方法建立了模糊评判模型，计算了最终的评判权值并给出了评价结果。实例表明，该方法将层次分析法和模糊综合评判方法相结合，可以对各影响因素进行综合权衡分析，从而有效地对工程装备的测试性做出综合评价。

关键词:

层次分析法, 模糊综合评判, 测试性, 综合评价, 工程装备

CLC Number:

TP206.1

SHU Chun-Sheng, ZHANG Qi, DAN Gong-Liang, JIAO Yu-Min.

Research on Testability Comprehensive Evaluation Method for Engineering Equipment

[J]. China Mechanical Engineering, 2011, 22(9): 1044-1048.

朱春生, 张琦, 冉红亮, 焦玉民.

工程装备测试性综合评价方法研究

[J]. 中国机械工程, 2011, 22(9): 1044-1048.

[1]	CHEN Shuai, GUO Feiyan, MENG Yuemei, WANG Mingyang, HOU Zhixia . Iterative Optimization and Evaluation Method for Repair Quantity of Aviation Structural Parts Considering Measured Data [J]. China Mechanical Engineering, 2022, 33(17): 2061-2070，2078.
[2]	YI Qian, LIU Chun, LI Congbo, YI Shuping, HE Shuang. A Low Carbon Optimization Decision Method for Gear Hobbing Process Parameters Driven by Small Sample Data [J]. China Mechanical Engineering, 2022, 33(13): 1604-1612.
[3]	REN Zhenbao, CAO Chunping. Optimization of First Deep Drawing Process Parameters for Power Battery Shells Based on Entropy Weight Comprehensive Evaluation Method [J]. China Mechanical Engineering, 2022, 33(13): 1622-1628.
[4]	GAO Jianping, YU Jiaheng, MENG Yao, XI Jianguo. Research and Verification of Control Parameter Automatic Optimization Calibration Simulation System for Electric Vehicles [J]. China Mechanical Engineering, 2022, 33(01): 118-125.
[5]	OUYANG Wu1,2,3;CHENG Qichao1,2;JIN Yong1,2;LIU Zhenglin1,2;LIU Xukang1,2;WANG Bin1,2. Performance Evaluation of Water Lubricated Stern Bearings Based on Entropy Weight Fuzzy Comprehensive Evaluation Method [J]. China Mechanical Engineering, 2020, 31(12): 1407-1414.
[6]	ZHU Lingyun;CHEN Ming. Research on Reverse Logistics Model and Network for Used Electric Vehicle Batteries [J]. China Mechanical Engineering, 2019, 30(15): 1828-1836.
[7]	ZHANG Lei;LIANG Deqian;CHA Chendong. Testability Evaluation of Complex Equipment Based on Multi-source Informations [J]. China Mechanical Engineering, 2017, 28(23): 2875-2879.
[8]	TANG Bangbei, GUO Gang, XIA Jinjun. Method and Device for Material Odor Evaluation and Selection of Automobile Interior Design Based on User's Olfactory Sensation Experiences [J]. China Mechanical Engineering, 2017, 28(02): 206-214.
[9]	Yao Xiaopeng, Huang Huachuan, Yin Guofu, Li Guangming . Accuracy Evaluation of CNC Machines Based on IEGF-AHP Algorithm [J]. China Mechanical Engineering, 2016, 27(23): 3215-3220.
[10]	Pan Shangfeng, Lu Chao, Peng Yibo. Evaluation Model for Machine Tool Basic Parts Remanufacturability Based on Optimized BP Neural Network [J]. China Mechanical Engineering, 2016, 27(20): 2743-2748.
[11]	Yang Fan, Tang Baoping, Yin Aijun. Early Performance Degradation Assessment of Rolling Bearings Based on Comprehensive Evaluation Function Constructing by Wavelet Packet Energy Spectrum [J]. China Mechanical Engineering, 2015, 26(17): 2355-2368.
[12]	Wang Haitao, Zhang Qi, Zhu Chunsheng, Zhao Hongfei, Li Huanliang. Method of Testability Dynamic Evaluation for Military Engineering Machinery [J]. China Mechanical Engineering, 2015, 26(14): 1882-1887.
[13]	Zhang Genbao, Guo Shuheng, Liu Jian. Selective Method of Accelerated Stresses in Accelerated Reliability Growth Test for Machining Centers [J]. China Mechanical Engineering, 2014, 25(12): 1623-1629.
[14]	Liu Wenting;Zhao Youqun;Ruan Miqing;Wang Wei. Fuzzy Comprehensive Evaluation and Verification for Handling Stability of Vehicle [J]. China Mechanical Engineering, 2013, 24(19): 2681-2686.
[15]	Zhao Youqun;Liu Yingjie. Research on Subjective Evaluation Indexes for Vehicle Handling Stability Based on Improved Analytic Hierarchy Process and Fuzzy Comprehensive Evaluation [J]. China Mechanical Engineering, 2013, 24(18): 2519-2523.

Research on Testability Comprehensive Evaluation Method for Engineering Equipment

工程装备测试性综合评价方法研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics