Rapid Simulation of Elastic Problems Based on GPU

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (8): 932-937.

Previous Articles Next Articles

Rapid Simulation of Elastic Problems Based on GPU

Wang Jianhua1;Li Guangyao1;Li Sheng2;Zhang Yong3

1.State key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha,410083

2.Peking University,Beijing,100871;;3.Huaqiao University,Xiamen,Fujian,361021

Online:2011-04-25 Published:2011-05-04
Supported by:

National Program on Key Basic Research Project (973 Program)（No. 2010CB328005）;
Supported by Program for Changjiang Scholars and Innovative Research Team in University（No. 531105050037）

基于GPU弹性问题的快速计算方法

王建华1;李光耀1;李胜2;张勇3

1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410083

2.北京大学,北京,100871

3.华侨大学,厦门,361021

基金资助:
国家重点基础研究发展计划(973计划)资助项目(2010CB328005)；长江学者创新团队和发展计划资助项目(531105050037)；湖南大学汽车车身先进设计制造国家重点实验室自主课题(60870005)
National Program on Key Basic Research Project (973 Program)（No. 2010CB328005）;
Supported by Program for Changjiang Scholars and Innovative Research Team in University（No. 531105050037）

Abstract

Abstract:

In order to eliminate the lasting calculation bottleneck on

applications of finite element,a new method was proposed to accelerate the computing of FEM by using the existing modern GPU and programmable shading tool.Under the FEM theory, this paper analyized the pros and cons of using GPU parallel process,

coordinated the task assignment and data exchange between GPU and CPU and designs a new FEM processing architecture by using the computational resources of GPU.

The GPU parallel simulation calculation rate is 22 times faster than that by using CPU’s,as well as it has useful and practical value in solving the project problems.

Key words:

finite element, cell, node, parallel, graphic processing unit(GPU)

摘要：

为了解决计算时间过长这一制约有限元计算在实际工程中应用的瓶颈问题,提出了一种利用并行处理方式加速有限元计算的方法。从有限元计算理论着手，详细分析了引入图形处理器并行处理方式的利弊，协调了图形处理器、中央处理器之间的任务分配和数据交换，并围绕图形处理器的计算资源设计出了全新的有限元计算处理架构。研究结果表明,效率提高了近22倍。

关键词:

有限元, 单元, 节点, 并行, GPU

CLC Number:

TP399

WANG Jian-Hua, LI Guang-Yao, LI Qing, ZHANG Yong.

Rapid Simulation of Elastic Problems Based on GPU

[J]. China Mechanical Engineering, 2011, 22(8): 932-937.

王建华, 李光耀, 李胜, 张勇.

基于GPU弹性问题的快速计算方法

[J]. 中国机械工程, 2011, 22(8): 932-937.

[1]	LI Meng-Lei, GU Yo-Qin, ZHANG Hua-Liang, LIU Li-Qin, DU Juan, WEN Chu-Hua, LAN Guo-Sheng. Parallel Mechanism Structure Optimization Design Based on Multi-objective Differential Evolution Algorithm [J]. J4, 201016, 21(16): 1915-1920.
[2]	LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao. Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism [J]. J4, 201016, 21(16): 1926-1931.
[3]	ZHANG Min-Jie, WANG Qiang-Jiu, GUAN Cheng. Simulation Research of Parallel Hydraulic Hybrid Excavator [J]. J4, 201016, 21(16): 1932-1936.
[4]	SUN Chiyu, SHEN Huiping, YUAN Juntang, YANG Tingli. Kinematics of a Novel Three-translation and One-rotation(3T1R) Semi-symmetry Parallel Manipulator [J]. China Mechanical Engineering, 2021, 32(06): 638-647.
[5]	LI Yingli;LI Xinyu;GAO Liang. Review on Hybrid Flow Shop Scheduling Problems [J]. China Mechanical Engineering, 2020, 31(23): 2798-2813,2828.
[6]	GONG Junshan;FANG Yuefa;JIN Xiaodong. Design and Research of Multifunctional Dexterous Hands Based on Parallel Finger Structure [J]. China Mechanical Engineering, 2020, 31(23): 2837-2846.
[7]	. Bearing Life Prediction Method Based on PMCCNN-LSTM [J]. China Mechanical Engineering, 2020, 31(20): 2454-2462,2471.
[8]	WANG Xinyu；QIN Wei；SUN Xiaojun；HU Xiaoliang. Nonlinear Synchronous Robust Control for 3-PPR Parallel Servo Platforms [J]. China Mechanical Engineering, 2020, 31(19): 2269-2275.
[9]	WANG Guan1；ZHANG Qian2；KOU Linyuan1；LIU Zhiwen3；LI Shikang3. Nonlinear Topology Optimization of Continuum Structures Based on HCA Algorithm [J]. China Mechanical Engineering, 2020, 31(18): 2161-2173.
[10]	WANG Yixi1;WU Guanglei2;SHEN Huiping1;LI Jiayu1;MENG Qingmei1;LI Ju1;DENG Jiaming1. Stiffness Modeling and Analysis of Semi-symmetrical Three-translation Delta-CU Parallel Mechanism [J]. China Mechanical Engineering, 2020, 31(17): 2050-2058.
[11]	SHEN Huiping, XU Ke, YANG Tingli. A Novel Forward Position Kinematics Modelling Principle for Mechanisms Based on Ordered Solutions for SOC Units and Its Two Solving Methods [J]. China Mechanical Engineering, 2020, 31(14): 1647-1658.
[12]	LIU Hongyi, FAN Rui, GUO Jiangzhen, ZHANG Wei, ZHAO Qinzhi, CHEN Wuyi. Multi-axis Loading Device for Reliability Tests of CNC Machine Tools [J]. China Mechanical Engineering, 2020, 31(13): 1606-1612.
[13]	KONG Juncheng;LI Ju;SHEN Huiping. Error Analysis and Compensation for Clearances among Kinematic Pairs of 2-RPaRSS Parallel Manipulators [J]. China Mechanical Engineering, 2020, 31(06): 706-713.
[14]	YAN Jiahao;CAO Huajun;CHEN Erheng;SONG Dandan;ZHU Linquan. On-line Monitoring Method and System for Energy Efficiency of Die Casting Cells [J]. China Mechanical Engineering, 2020, 31(05): 586-594.
[15]	GUO Xiangyu;WANG Lin;ZHANG Yongjian. Machining Process Planning Based on Immune Genetic Algorithm under Rule Constraints [J]. China Mechanical Engineering, 2020, 31(04): 482-488.

Rapid Simulation of Elastic Problems Based on GPU

基于GPU弹性问题的快速计算方法

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics