Research on Multi-step Active Disassembly Methods and Design Principles of Products Based on ADSM

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (7): 848-852.

Previous Articles Next Articles

Research on Multi-step Active Disassembly Methods and Design Principles of Products Based on ADSM

Zhao Liuxian1;Liu Zhifeng1;Li Xinyu1;Zhang Hongchao1,2;Cheng Huanbo1

1.Hefei University of Technology, Hefei, 230009

2.Texas Tech University, Texas, USA, 79409

Online:2011-04-10 Published:2011-04-15
Supported by:
National Natural Science Foundation of China（No. 50775064）

基于智能材料主动拆卸技术的产品多级主动拆卸方法及其设计准则研究

赵流现1;刘志峰1;李新宇1;张洪潮1,2;成焕波1

1.合肥工业大学，合肥，230009

2.德克萨斯理工大学，德克萨斯，美国，79409

基金资助:
国家自然科学基金资助项目(50775064)
National Natural Science Foundation of China（No. 50775064）

Abstract

Abstract:

It is difficult to disassemble the complicated or big product completely, it is also difficult to choose the components if they are mixed together. One of the solutions is multi-step active disassembly. This paper mainly studied a method of multi-step active disassembly, discussed the theory, and analyzed the design principles of multi-step active disassembly products. Finally, the feasibility of multi-step active disassembly was proven by using actual example.

Key words:

multi-step active disassembly, design principle, active disassembly using smart material(ADSM), active disassembly product

摘要：

针对一些结构复杂或体积较大的产品很难通过一次加热实现完全拆解，以及较多的零部件混杂在一起给后续分拣带来困难等问题，基于智能材料主动拆卸技术的产品多级主动拆卸方法探讨了多级主动拆卸的原理，分析了多级主动拆卸产品的设计准则。结合实际案例分析了多级主动拆卸方法的可行性。

关键词:

多级主动拆卸, 设计准则, 智能材料主动拆卸, 主动拆卸产品



CLC Number:

TH122

DIAO Liu-Xian, LIU Zhi-Feng, LI Xin-Yu, ZHANG Hong-Chao, CHENG Huan-Bei.

Research on Multi-step Active Disassembly Methods and Design Principles of Products Based on ADSM

[J]. China Mechanical Engineering, 2011, 22(7): 848-852.

赵流现, 刘志峰, 李新宇, 张洪潮, 成焕波.

基于智能材料主动拆卸技术的产品多级主动拆卸方法及其设计准则研究

[J]. 中国机械工程, 2011, 22(7): 848-852.

References

[1]吴峰.电子废弃物的环境管理与处理处置技术初探一国外现状综述.中国环保工业,:38-39.
[2]聂永丰.我国电子电器废物的回收及处置[J].资源再生,2003(12):11-13.
[3]李长荣[1],唐建军[2],洪新[2],吴扣根[2].废弃家电的环境危害及其黑色金属的再生资源化[J].环境污染与防治,2003,25(2):109-110.
[4]李卫京[1],雷军武[1],李亚平[2],曹花荣[1].机电产品的绿色制造模式及其发展趋势[J].机械研究与应用,2007,20(2):7-8.
[5]吕国强[1],王华[1],郝玉琨[2].废弃电子产品的处理与回收技术[J].云南环境科学,2003,22(3):44-46.
[6]徐伟[1,2],陈吉红[1].面向产品回收的可拆卸性设计技术的研究[J].机床与液压,2009,37(2):24-28.
[7]祁红志[1],徐惠益[1].机电产品面向拆卸与回收的设计理论与方法[J].现代制造工程,2007(6):134-138.
[8]Lee K, Gadh R. Computer Aided Design for Disassembly: a Destructive Approach[c]//Proceedings of the 1996 IEEE International Symposium on Electronics &the Environment. New Jersey, USA: IEEE , 1999: 173-178.
[9]Arnaiz S, Bodenhoefer K, Herrmann C, et al. Invited Session: Active Disassembly Using Smart Material (ADSM) [R]. Bangalore: Nokia Research Center, 2002.
[10]Chiodo J D, Billett E H, Harrison D J. Preliminary Investigations of Active Disassembly Using Shape Memory Polymers [ R]. Egham: Brunel University, 1999.
[11]Chiodo J D. Shape Memory Alloy Actuators for Active Disassembly Using Smart Materials of Consumer Electronic Products[J]. Materials and Design, 2002, 23(11): 471-478.
[12]陈旺志,陈家豪.利用聪敏材料来主动拆解[C]//2006永续产品与产业研讨会论文集,中国台湾2006:B2-4.
[13]Seelecke S. Shape Memory Alloy Actuators inSmart Structures: Modeling and Simulation [J]. American Society of Mechanical Engineers, 2004, 57(1) : 23-46.
[14]刘志峰[1],李新宇[1],张洪潮[1,2].基于智能材料主动拆卸的产品设计方法[J].机械工程学报,2009,45(10):192-197.
[15]李新宇.基于智能材料的主动拆卸结构设计理论与方法研究 [D].合肥工业大学,2008:
[16]Chiodo J D, Boks C. Assessment of End-of-life Strategies with Active Disassembly Using Smart Materials[J]. The Journal of Sustainable Product Design, 2002(2): 69-82.
[17]Chiodo J D, Billett E H, Harrison D J. Active Disassembly by Using Shape Memory Polymers for the Mobile Phone Industry[C]//1999 IEEE International Symposium on Electronics and the Environment. Washington D C, USA: IEEE, 1999: 151-156.
[18]王跃方[1],杨大智[2].含形状记忆合金智能材料系统的力学分析与设计研究[J].功能材料,2000,31(6):569-571.
[19]Liu Guangfu, Li Xinyu, Liu Zhifeng, et al. Research on Detachability of Remotes Based on ADSM [ C ]//15 th CIRP International Conference on Life Cycle Engineering. Sydney, Australia: CIRP, 2008:596- 599.
[20]王波[1],王宁生[1].装配体拆卸序列的自动生成及优化研究[J].淮海工学院学报,2005,14(1):14-17.
[21]王波[1],王宁生[1].机电装配体拆卸序列的自动生成及组合优化[J].山东大学学报：工学版,2006,36(2):52-57.
[22]郭伟祥[1],刘志峰[1],刘光复[1],潘晓勇[1],黄海鸿[1].基于模块化思想的拆卸序列规划[J].计算机辅助设计与图形学学报,2005,17(3):498-504.
[23]王波[1],王宁生[1].自动生成优化的拆卸序列的初始群体[J].机械设计与研究,2005,21(2):59-60.

Research on Multi-step Active Disassembly Methods and Design Principles of Products Based on ADSM

基于智能材料主动拆卸技术的产品多级主动拆卸方法及其设计准则研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics