[1]Gibson L J, Ashby M F. Cellular Solids: Structure and Properties [M]. Cambridge: Cambridge University Press, 1997.
[2]Marc A M, Chen P Y, Albert Y M L, et al. Biological Materials: Structure and Mechanical Properties[J]. Progress in Materials Science, 2008, 53:1 -206.
[3]Katta J, Jin Z, Ingham E, et al. Biotribology of Articular Cartilage-a Review of the Recent Advances[J]. Medical Engineering Physics, 2008, 30: 1349-1363.
[4]Fortes M A, Colaco R, Fatima M. The Contact Mechanics of Cellular Solids[J]. Wear, 1999, 230: 1-10.
[5]Liu Zuomin. Elevated Temperature Diffusion Self- lubricating Mechanisms of a Novel Cermet Sinter with Orderly Micro-pores[J]. Wear, 2007, 262:6OO-6O6.
[6]解芳[1],刘佐民[1].高温发汗润滑体单胞接触应力分析模型研究[J].中国机械工程,2008,19(24):2982-2986.
[7]Xie Fang, Liu Zuomin, Wang Yanjun. Advances in Heterogeneous Material Mechanics [C]//The 3rdInternational Conference on Heterogeneous Materials Mechanics. Lancaster: ICHMM, 2008: 550- 554.
[8]Brydona A D, Bardenhagena S G, Millerb E A, et al. Simulation of the Densification of Real Open -celled Foam Microstructures[J]. Journal of the Mechanics and Physics of Solids, 2005, 53: 2638- 2660.
[9]Zarei H R, Kroger M. Optimization of the Foam-filled Aluminum Tubes for Crush Box Application [J]. Thin- walled Structures, 2008, 46: 214-221.
[10]Chai H. On Optimizing Crash Energy and Load-bearing Capacity in Cellular Structures[J]. International Journal of Solids and Structures, 2008, 45 : 528-539.
[11]Tantikom K, Aizawa T, Mukai T. Symmetric and Asymmetric Deformation Transition in the Regularly Cell-structured Materials. Part I: Experimental Study[J]. International Journal of Solids and Structures, 2005(42): 2199-2210.
[12]Tantikom K, Aizawa T, Mukai T. Symmetric and Asymmetric Deformation Transition in the Regularly Cell-structured Materials. Part II: Theoretical Study[J]. International Journal of Solids and Structures, 2005(42): 2211-2224.
[13]刘佐民.摩擦学理论与设计[M].武汉:武汉理工大学出版社,2009. 0
[14]Rogalsks E, Kakoi W, Guerlement G, et al. Limit Load Analysis of Perforated Disks with Square Penetration Pattern[J]. Journal of Pressure Vessel Technology, 1997, 119: 122-126.
[15]张后全[1,2],唐春安[1],宋力[1],马天辉[1].布孔方式对孔洞材料宏观力学性能影响的研究[J].应用力学学报,2006,23(1):62-67.
[16]Johnson K L. Contact Mechanics [m]. Cambridge: Cambridge University Press, 1985.
[17]解芳[1],刘佐民[1].厚壁胞体多孔结构接触强度研究[J].固体力学学报,2010,31(3):296-301.
[18]李春胜,黄德彬.机械工程材料手册[M].北京:电子工业出版社,2007:454.
|