Research on Obstacle Avoidance by Virtual Force for Redundant Robot

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (24): 2899-2902.

Previous Articles Next Articles

Research on Obstacle Avoidance by Virtual Force for Redundant Robot

Chou Wusheng;Wang Shuo

State Key Laboratory of Virtual Reality Technology and Systems,Beihang University,Beijing,100191

Online:2011-12-26 Published:2011-12-29
Supported by:
National Natural Science Foundation of China（No. 60775051）

基于虚拟力的冗余度机器人自主避障研究

丑武胜;王朔

北京航空航天大学虚拟现实技术与系统国家重点实验室,北京,100191

基金资助:
国家自然科学基金资助项目(60775051)
National Natural Science Foundation of China（No. 60775051）

Abstract

Abstract:

This paper present a new method of obstacle avoidance for redundant robot with tool-tip restrictions. This method introduced virtual force and kinematic of multibody system into obstacle avoidance.The robot avoided obstacle in real-time based on the obstacle avoidance force and the attraction of mission path. Obstacle avoidance algorithm improves accuracy and efficiency by the partition of operating area and the accurate computation of obstacle avoidance force. The approach implements collision avoidance without kinematics optimization and improves the real-time performance.

Key words: virtual force, redundant robot, multi-body dynamics, obstacle avoidance

摘要：

针对具有末端位姿约束的冗余度机器人,提出了一种实现障碍回避的新方法。该方法将虚拟力和多体动力学引入冗余度机器人的自主避障中,机器人在避障力、任务路径吸引力等综合作用下实时地回避障碍物。避障算法对机器人的工作区域进行划分,并实现末端关节避障力的精确计算。该方法使障碍回避过程不再依赖于运动学优化,提高了系统的实时性。

关键词:

虚拟力, 冗余度机器人, 多体动力学, 自主避障

CLC Number:

TP24

CHOU Wu-Qing, WANG Shuo.

Research on Obstacle Avoidance by Virtual Force for Redundant Robot

[J]. China Mechanical Engineering, 2011, 22(24): 2899-2902.

丑武胜, 王朔.

基于虚拟力的冗余度机器人自主避障研究

[J]. 中国机械工程, 2011, 22(24): 2899-2902.

[1]	ZHOU Song, CHEN Yu, DONG Hongliang, GAO Xiang, SHEN Juan, ZHOU Jia, WAN Xinming. Research on Multi-axis Road Simulation Test of a New Type of Commercial Vehicle Cab [J]. China Mechanical Engineering, 2023, 34(10): 1241-1250.
[2]	RONG Yu, DOU Tianci, ZHANG Xingchao, ZHANG LeiZ, HAO Jingyu. A Real-time Control Method for Optimal Overall Performances of Planar Redundant Robots [J]. China Mechanical Engineering, 2022, 33(16): 1928-1939.
[3]	LIU Xuemei, FENG Yan, YANG Zhen, LI Aiping, LU Junguo. IAFSA for Solving Inverse Kinematics of Redundant Robotic Spraying System [J]. China Mechanical Engineering, 2022, 33(11): 1317-1323.
[4]	CHENG Jiayuan;REN Tingzhi;ZHANG Zilong ;LIU Dawei ;JIN Xin. Multi-body Dynamics Analysis and Test Verification for Inertia Cone Crushers [J]. China Mechanical Engineering, 2020, 31(19): 2322-2331.
[5]	GE Wentao;HUANG Hui;LIU Zhou;QIU Xing;JIA Huifang. Load Spectrum Development Methodology for Accelerating Dynamics Model Virtual Iteration [J]. China Mechanical Engineering, 2020, 31(12): 1504-1511.
[6]	CHEN Ziming1,2;XUE Zhigang1,2;ZHANG Song3;LI Luoxing1,2. Closing Effort Analysis of Sliding Doors Based on Co-simulation of ADAMS and Simulink [J]. China Mechanical Engineering, 2020, 31(08): 924-930.
[7]	LI Shuya1;GU Zhengqi1,2;HUANG Taiming3;LIU Jun1;ZHENG Ledian1. Two-way Coupling Analysis of Vehicle Stability in Different Crosswind Conditions [J]. China Mechanical Engineering, 2019, 30(19): 2276-2286.
[8]	HAO Bingfei;WANG Hongyan;RUI Qiang;WANG Qinlong. Dynamics Modeling and Model Test Verification of Tank Multi-body Systems [J]. China Mechanical Engineering, 2018, 29(04): 429-433,440.
[9]	LIANG Mingxuan1,2,3;LI Zhenggang2;TANG Renzhong1;CHEN Li2;HUANG Chuan2. Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics [J]. China Mechanical Engineering, 2017, 28(21): 2562-2566.
[10]	Xu Lixin, Yang Yuhu. A General Method for Multi-tooth Contact Analysis of Cycloid-pin Gear Transmission [J]. China Mechanical Engineering, 2016, 27(10): 1382-1388.
[11]	Liu Rongsheng, Li Hui, Gao Yingjie, Yang Yulin. Vibration Analysis and Experimental Test of a Boom System of Truck Mounted Concrete Pump [J]. China Mechanical Engineering, 2015, 26(15): 2125-2129.
[12]	Liu Tingwei, Zhang Ning, Liang Wei, Zhang Liang. Failure Simulation Analysis and Eexperimental Verification of Bearings for Spaceborne Moving Mechanism [J]. China Mechanical Engineering, 2014, 25(21): 2864-2868.
[13]	GE Xin-Feng. Analysis of a 7-DOF Automated Fiber Placement Robotic Manipulator's Self-Motion Manifolds [J]. China Mechanical Engineering, 2013, 24(12): 1591-1595.
[14]	TANG Hao, DUAN Ji-An, ZHENG Yu, CHU Meng-Feng. Motion Error Sensitivity Analysis of Planar Optical Waveguide Precise Aligning Stage [J]. China Mechanical Engineering, 2012, 23(8): 888-892,896.
[15]	JI De-Sheng, HUANG Xue-Gong, WANG Yong. Study on Modified Involute Profile Roller Chain Sprocket and Its Dynamic Features [J]. China Mechanical Engineering, 2011, 22(9): 1118-1122.

Research on Obstacle Avoidance by Virtual Force for Redundant Robot

基于虚拟力的冗余度机器人自主避障研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics