Combination Law of C-shape Plates of Huge Forging Press with Consideration of Manufacturing Errors

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (20): 2442-2446.

Previous Articles Next Articles

Combination Law of C-shape Plates of Huge Forging Press with Consideration of Manufacturing Errors

Li Yibo;Huang Minghui

State Key Laboratory of High Performance Complex Manufacturing，Central South University,Changsha,410083

Online:2011-10-25 Published:2011-11-02
Supported by:

National Science and Technology Major Project ( No. 2010ZX04017-013)

考虑制造误差的模锻压机C形板组配顺序研究

李毅波;黄明辉

中南大学高性能复杂制造国家重点实验室,长沙,410083

基金资助:
国家科技重大专项(2010ZX04017-013)；高等学校科技创新工程重大项目培育资金资助项目(0707046)
National Science and Technology Major Project ( No. 2010ZX04017-013)

Abstract

Abstract:

Using MSC. Marc, a three-dimensional finite element model of a 800MN forging press was built, different combination modes of the load bearing structure caused by manufacturing errors were analyzed, the law of stress distribution under different combination modes and different load-bearing plate numbers were studied. Finally, the combination law of parallel load bearing structure

was set up and laid a preliminary foundation for the stable running of the equipment,

which ensured the force flow uniformly.

Key words: manufacturing error, distortion stress, combination law, parallel load, huge forming press

摘要：

以800MN巨型模锻压机为研究对象,运用商用软件Marc,建立了并行承载C形板组结构的三维有限元模型，分析了由制造误差而形成的承载部件典型组配方式，研究了不同组配方式和不同承载板数量下关键部件的应力畸变规律，得到了保证力流均匀传递的并行承载结构组配规律。

关键词:

制造误差, 应力畸变, 组配规律, 并行承载, 巨型成形装备

CLC Number:

TH122

LI Yi-Bei, HUANG Meng-Hui.

Combination Law of C-shape Plates of Huge Forging Press with Consideration of Manufacturing Errors

[J]. China Mechanical Engineering, 2011, 22(20): 2442-2446.

李毅波, 黄明辉.

考虑制造误差的模锻压机C形板组配顺序研究

[J]. 中国机械工程, 2011, 22(20): 2442-2446.

[1]	SHU De-Xin, LIU Hong-Zhao. Reliability Allocation of High Speed Motorized Spindle Based on Improved Fuzzy AHP Method [J]. China Mechanical Engineering, 2011, 22(24): 2923-2927.
[2]	JIANG Jian-Dong, DAO Guo-Xin, DIAO Ying-Di, ZHANG Li-Ban, XU Fang. Simulation Analysis and Optimization of Friction Separation Mechanism of Mailing Machine [J]. China Mechanical Engineering, 2011, 22(24): 2931-2936.
[3]	LIU Zi-Jian, XIE Zong-Min, LV Cheng. Design of a New Vertical Rotary Paper-cutting Device  [J]. J4, 2011, 22(24): 2953-2957.
[4]	TENG Ru-Min, SHU He-Lou, ZHANG Zhi-Gang. Analysis of Mapping Connection between Cylinder Telescoping and Rotation of Boom in Mechanisms [J]. China Mechanical Engineering, 2011, 22(23): 2812-2816.
[5]	LIU Meng-Zhou, GONG Lin-Bei, HU Jing, GE Mao-Gen. Operating Comfort Evaluation of Control Devices Based on Grey Relational Analysis [J]. China Mechanical Engineering, 2011, 22(21): 2642-2645.
[6]	CHAN Mi-Yuan-1, WANG Ke-Chi-1, 2, YUAN Ji-Jun-3. Multi-objective Intelligence Optimization for Scale-based Product Family without Platform Commonality [J]. China Mechanical Engineering, 2011, 22(20): 2428-2436.
[7]	HU Jing, LIU Meng-Zhou, GONG Lin-Bei, JIANG Ceng-Jiang, GE Mao-Gen. Evaluation of Vehicle Operating Force Comfort Based on Principal Component Analysis [J]. China Mechanical Engineering, 2011, 22(20): 2456-2459.
[8]	GUO Qian-1, LI Yan-Lai-1, BO Yun-1, LUO Xin-Gang-2. Analysis of Customer Requirements in Product Planning Based on Incomplete Linguistic Preference Information [J]. China Mechanical Engineering, 2011, 22(20): 2485-2489,2519.
[9]	MEI Shun-Ji-1, ZHANG Zhi-Meng-1, 2, XU Qiao-1, 3, DU Xing-1, WANG Zhi-Wei-1, LIU Beng-1. Research Progresses of Design Methods for Axial Magnetic Coupling Drive Mechanisms [J]. China Mechanical Engineering, 2011, 22(19): 2375-2381.
[10]	LIU Zhi-Feng, HU Di, GAO Xiang, ZHANG Jing-Dong. Product Disassembly Sequence Planning Based on Greedy Algorithm  [J]. China Mechanical Engineering, 2011, 22(18): 2162-2166.
[11]	ZHANG Lei-An, WU Jian-Zhong, CHEN Zhou-Quan, WANG Wei-Da. Design and Trial of MW Wind Turbine Blade Static Loading Control System [J]. China Mechanical Engineering, 2011, 22(18): 2182-2185,2208.
[12]	WANG Ke-Chi-1, YUAN Ji-Jun-2, CHEN Wei-Min-1, QUAN Chun-Guang-1. A Two-stage Multi-objective Intelligent Optimization Algorithm for Single Platform Based Product Family Design [J]. China Mechanical Engineering, 2011, 22(17): 2097-2103.
[13]	CHEN Ding, HUANG Ji-Bai. Vertical Stiffness Model of Linear Motion Guide Considering Flexibility of Carriage [J]. China Mechanical Engineering, 2011, 22(13): 1546-1550.
[14]	DAO You-Rui-1, HAN Xu-2, JIANG Chao-2, LIU Ying-Chun-1. A Multi-objective Multidisciplinary Design Optimization Method Based on Integrating Linear Physical Programming and Bi-level Integrated System Synthesis [J]. China Mechanical Engineering, 2011, 22(11): 1357-1361.
[15]	GUAN Qing-Gui, YAN Guo-Fu, HU Xiao-Bing, YIN Xiang-Yun. Research on Knowledge Description Method of Knowledge Template Five Factors Based on Pattern Language [J]. China Mechanical Engineering, 2011, 22(10): 1185-1188.

Combination Law of C-shape Plates of Huge Forging Press with Consideration of Manufacturing Errors

考虑制造误差的模锻压机C形板组配顺序研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics