[1]况学成,马光华.大规格抛光砖抛后变形问题的初步探讨[J].中国陶瓷工业,2000,7(1):18-20.
[2]钟保民.砖坯抛光进砖方向对抛光砖平整度的影响[J].佛山陶瓷,2000,10(4):23-25.
[3]冯浩,张柏清.墙地砖抛光机磨削均匀性分析及建模[J].陶瓷学报,1999,20(4):220-225.
[4]Orts M J, Sanchez E, Gareia- Ten, et al. Porcelain Tile Behavior during Polishing[J]. Bol. delaSoe. EsP. de Ceramicay Vidrio, 2001,40 : 447-455.
[5]Hutchings I M, Xu Y, Sanchez E, et al. Porcelain Tile Microstructure: Implications for Polishability [J].Journal of the European Ceramic Society, 2006,26(6):1035-1042.
[6]Sanchez E,Ibanez M J,Garcia-Ten J,et al. Porce- lain Tile Microstructure: Implications for Polished Tile Properties[J]. Journal of the European Ceram- ic Society, 2006,26 (13) : 2533-2540.
[7]Sousa J P F,Aurich J C,Weingaertner L,et al. Ki- nematics of a Single Abrasive Particle during the In- dustrial Polishing Process of Porcelain Stoneware Tiles[J]. Journal of the European Ceramic Society, 2007,27(10) :3183-3190.
[8]Xu X P, Huang H,Gao Ying, et al. Processes for the Generation of Glossiness on Ground Granites and Ceramics[J]. Key Engineering Materials, 2003, 238(2) :99-104.
[9]Wang C Y, Kang T C, Qin Z, et al. How Abrasive Machining Affects Surface Characteristics of Vitre- ous Ceramic Tile [J]. American Ceramic Society Bulletin, 2003,82(10), 9201-9208.
[10]Tucci A, Esposito L, Malmusi L, et al. Wear Re- sistance and Stain Resistance of Porcelain Stone- ware Tiles[J]. Key Engineering Mater. , 2002,206 (2) : 1759-1762.
[11]Braganca S R, Bergmann C P. A View of White- wares Mechanical Strength and Microstructure [J].Ceramics Intenational, 2003,29 : 801-806.
[12]李松[1],郑超[1],黄瑞文[1].抛光砖面磨抛均匀性浅析[J].陶瓷,2005(7):19-21.
[13]汤迎红 吴运新 周鹏.陶瓷抛光机抛光盘凸轮的改进设计.机械设计,2006,(3):58-60.
[14]吴南星[1],朱金贵[1],肖任贤[1].陶瓷用抛光机磨头声-结构分析及噪声控制[J].陶瓷学报,2009,30(1):101-105.
[15]陈彩如[1],谭建平[1].大规格陶瓷砖抛光过程仿真与试验研究[J].中国陶瓷,2008,44(2):45-47.
[16]郭立,李卫平.瓷质砖抛光机磨削效率分析[J].中国陶瓷工业,1999,6(4):14-20.
[17]李立 孙容熙 徐燕申 等.考虑切入效应的立轴平磨再生稳定性分析.天津大学学报,1988,21(4):78-86.
[18]王德全.砂轮特性与磨削加工[M].北京:中国标准出版社,2001.
[19]于振明.高效立轴磨削的一些实验室研究[D].沈阳:东北大学,1989.
[20]于振明[1],宋振武[2].立轴平面磨削方式对磨削效果的影响[J].磨料磨具与磨削,1990(4):6-10. |