[1]Meindersa T, Berg A, HueAtinka J. Deep Drawing Simulations of Tailored Blanks and Experimental Verification[J]. Journal of Materials Processing Technology, 2000, 103: 65-73.
[2]Kleiner M, Geiger M, Klaus A. Manufacturing of Lightweight Components by Metal Forming[J]. CIRP Annals-Manufacturing Technology, 2003, 52 (2) : 521-542.
[3]International Iron and Steel Institute. Project reports on UltraLighl Steel Aulo Body (ULSAB) and UltraLight Sled Auto Body-Advanced Vehicle Concepts (ULSAB-AVC )[EB/OL] [2010-04-06]. http://www. worldaulosted, org/Proiects/ULSAB/Programme-engineering- report, aspx,.
[4]马明图.先进汽车用钢[M].北京:化学工业出版社,2007.
[5]中国汽车工程学会.世界汽车技术发展跟踪研究[M],2006.
[6]Doege E, Sebastian W, Droder K, et al. Increased Formability of Mg-Sheets using Temperature Controlled Deep Drawing Tools, in Innovations in Processing and Manufacturing of Sheet Materials [C]// TMS Annual Meeting. Orleans, 2001:53-60.
[7]Sharma R S, Molian P. Yb: YAG Laser Welding of TRIP780 Steel with Dual Phase and Mild Steels for Use in Tailor Welded Blanks[J]. Materials and Design, 2009, 30: 4146-4155.
[8]Ghoo B Y, KeumY T, Kim Y S. Evaluation of the Mechanical Properties of Welded Metal in Tailored Steel Sheet Welded by CO2 Laser[J]. Journal of Materials Processing Technology,2001, 113: 692-698.
[9]Panda S K, Kumara D R, Kumar H, et al. Characterization of Tensile Properties of Tailor Welded IF Steel Sheets and Their Forrnability in Stretch Forming[J]. Journal of Materials Processing Technology, 2007, 183 : 321-332.
[10]Zadpoor A A, Sinke J, Benedictus R. Finite Element Modeling and Failure Prediction of Friction Stir Welded Blanks[J]. Materials and Design, 2009, 30.. 1423 -1434.
[11]Buffa G, Fratini L, Shivpuri R. Finite Element Studies on Friction Stir Welding Processes of Tailored Blanks[J]. Computers and Structures, 2008, 86: 181 -189.
[12]Leitao C, Emilio B,Chaparro B M, et al. Formability of Similar and Dissimilar Friction Stir Welded AA 5182--H111 and AA 6016-T4 Tailored Blanks[J]. Materials and Design, 2009, 30: 3235-3242.
[13]林忠钦等著.车身覆盖件冲压成形仿真[M],2004:351.
[14]Turner P A, TomeC N. A Study of Residual Stresses in Zircaloy-2 with Rod Texture[J]. Acta Metall. , 1994, 42: 4143-4153.
[15]Agnew S R, Tome C N, Brown D W, et al. Study of Slip Mechanisms in a Magnesium Alloy by Neutron Diffraction and Modeling[J]. Scripta Mater. , 2003, 48: 1003-1008.
[16]Cazacu O, Plunkett B, Barlat F. Orthotropic Yield Criterion for Hexagonal Closed Packed Metals[J].International Journal of Plasticity, 2006, 22: 1171- 1194.
[17]Cazaeu O, Barlat F. A Criterion for Description of Anisotropy and Yield Differential Effects in Pressure --insensitive Metals[J]. International Journal of Plastieity, 2004,20: 2027-2045.
[18]Lee W, Chung K H,Kim D. Experimental and Nu merical Study on Formability of Friction Stir Welded TWB Sheets Based on Hemispherical Dome Stretch Tests[J]. International Journal of Plasticity, 2009, 25: 1626-1654.
[19]Lee M G, Kim D, Kim C, et al. A Practical Twosurface Plasticity Model and Its Application to Spring --back Prediction[J].International Journal of Plastic ity, 2007,23 : 1189-1212.
[20]Zhao K M, Chun B K, Lee J K. Finite Element Analysis of Tailor--welded Blanks[J]. Finite Elements in Analysis and Design, 2001, 37(2) : 117-30.
[21]Raymond D S, Wild M P, Bayley J C. On Modeling of the Weld Line in Finite Element Analyses of Tailor --welded Blank Forming Operations[J]. Journal of Materials Processing Technology, 2004, 147 :28-37.
[22]Chen W, Lin G S, Hu S J. A Comparison Study on the Effectiveness of Stepped Binder and Weld Line Clamping Pins on Formability Improvement for Tailor -welded Blanks[J].Journal of Materials Processing Technology, 2008, 207: 204-21.
[23]Padmanabhan R, Oliveira M C, Menezes I. F. Deep Drawing of Aluminum - steel Tailor- welded Blanks [J]. Materials and Design,2008, 29 : 154-160.
[24]Shakeri H R,Buste A, Worswick M J,et al. Study of Damage Initiation and Fracture in Aluminum Tailor Welded Blanks Made Via Different Welding Techniques[J]. Journal of Light Metals, 2002, 2: 95-110.
[25]Chien, W Y, Pan J, Tang S C. A Combined Necking and Shear Localization Analysis for Aluminum Sheets Under Biaxial Stretching Conditions[J].International Journal of Plasticity, 2004, 20:1953-1981.
[26]Sung H C, Jang M S, Young M H, et al. Spring-back Characteristics of the Tailor--welded Strips in U- bending[J]. Journal of Materials Processing Technology, 2002, 130-131: 14-19.
[27]Bayley C J, Pilkey A K. A Bifurcation Criterion for Predicting Weld-line Failures in AA5754 Alloy Tailor--welded Blanks [J]. Materials Science and Engineering A, 2006, 435 - 436: 62-70.
[28]姜银方,汪健敏,朱元右,等.拼焊板U形件回弹试验与仿真研究[C]//第九届全国塑性工程学术年会论文摘要集及第二届全球华人先进塑性加工技术研讨会论文集(二).太原,2005:81-83.
|