悬臂式货架立体仓货位智能优化

中国机械工程

悬臂式货架立体仓货位智能优化

张磊1,2;冷杰武1,2;龚粤1,2

1. 广东工业大学广东省计算机集成制造重点实验室，广州，510006
2. 广东工业大学省部共建精密电子制造技术与装备国家重点实验室，广州，510006

出版日期:2019-02-25 发布日期:2019-02-26
基金资助:
国家自然科学基金资助项目(51675108);
广东省应用型科技研发资助项目(2015B010128007);
广东省科技计划资助项目(2016A010106006)

Storage Position Intelligent Optimization for Cantilever Rack Stereoscopic Warehouses

ZHANG Lei1,2;LENG Jiewu1,2;GONG Yue1,2

1.Guangdong Provincial Key Laboratory of Computer Integrated Manufacturing System,Guangdong University of Technology,Guangzhou,510006
2.State Key Laboratory of Precision Electronics Manufacturing Technology and Equipment,Guangdong University of Technology,Guangzhou,510006

Online:2019-02-25 Published:2019-02-26

摘要/Abstract

摘要： 通过分析悬臂式货架立体仓库的结构和存储特点，建立了仓库利用率最大化和仓库稳定性最优化的多目标数学模型，并采用智能算法进行优化分析。仿真试验结果表明了该算法是有效的，也证明了多种群遗传算法比简单遗传算法更适合悬臂式货架立体仓库的货位优化。

关键词: 悬臂式货架立体仓库, 多种群遗传算法, 平面利用率最大化, 稳定性

Abstract: The structures and storage characteristics of a cantilever rack stereoscopic warehouse was analyzed, a multi-objective mathematical model was built based on the maximization of the utilization rate of the stereoscopic warehouses and the stability optimization of the cantilever rack stereoscopic warehouses, and intelligent algorithm was used to optimize analyses. Finally, through the simulation, the results show that the algorithm is effective, and the multiple population genetic algorithm is proved more suitable than simple genetic algorithm in solving the storage position optimization for cantilever rack stereoscopic warehouses.

Key words: cantilever rack stereoscopic warehouse, multiple population genetic algorithm, maximization of plane utilization；stability

中图分类号:

TP391

张磊1,2;冷杰武1,2;龚粤1,2. 悬臂式货架立体仓货位智能优化[J]. 中国机械工程.

ZHANG Lei1,2;LENG Jiewu1,2;GONG Yue1,2. Storage Position Intelligent Optimization for Cantilever Rack Stereoscopic Warehouses[J]. China Mechanical Engineering.

参考文献

[1]HESKETTJ L.Cube-per-order Index-a Key to Warehouse Stock Location[J].Transportation and Distribution Management,1963,1(3):27-31.
[2]LEE H F,SCHAEFER S K.Retrievel Sequencing for Unit Load Automated Storage and Retrieval Systems with Multiple Openings[J].Intertional Journal of Production Research,1996,34(10):2943-2962.
[3]SARKER B R,SABAPATHY A,LAL A M.Performance Evaluation of a Double Shuttle Auomated Storage and Retriveal System[J].Production Planning & Control:The Managenment of Operation,1991,2(3):207-213.
[4]KIM B, HERAGU S S, GRAVES R J,et al. Clustering-based Order-picking Sequence Algorithm for an Automated Warehouse[J]. International Journal of Production Research, 2003, 41(15):3445-3460.
[5]KIM B, HERAGU S S,GRAVES R J,et al. A Hybrid Scheduling and Control System Architecture for Warehouse Management[J]. IEEE Transactions on Robotics & Automation, 2003, 19(6):991-1001.
[6]KHOJASTEH-GHAMARI Y, SON J D, KOREA J. Order Picking Problem in a Multi-aisle Automated Warehouse Served by a Single Storage/Retrieval Machine [J]. International Journal of Information and Management Sciences Chang C T, 2008, 19(4):651-665.
[7]BYUNG C P, ROBERT D F, EDWARD E. Performance of Mini-load System with Two-class Storage[J].European Journal of Operational Research,2006,17(1):144-155.
[8]THOMSON J J. Efficient Scheduling for Multiple Automated Non-holonomic Vehicles Using a Coordinated Path Planner[C]//IEEE International Conference on Robotics and Automation. Shanghai,2011:1-4.
[9]EKREN BY , HERAGU S S , KRISHNAMURTHY A , et al. Matrix-geometric Solution for Semi-open Queuing Network Model of Autonomous Vehicle Storage and Retrieval System[J]. Computers & Industrial Engineering, 2014, 68:78-86.
[10]李诗珍.拣货方式、存储策略与路径策略协同研究[J].工业工程,2011,14(2):37-43.
LI Shizhen. Synergistic Effect Study on Picking,Storing and Routing Policies[J]. Industrial Engineering Journal, 2011,14(2):37-43.
[11]唐江峰. 定制家具板材分拣系统自动化立体仓库研究与设计[D].衡阳:南华大学,2016.
TANG Jiangfeng. Research and Dessign of AutoMatic Solid Warehouse of Sorting System for Custom Furniture Board[D]. Hengyang:University of South China,2016.
[12]王进业.旁通式自动化立体仓库堆垛机作业的优化调度研究[D].兰州:兰州交通大学,2015.
WANG Jinye.Study on Optimization of Stacker Working Dispatching in Bypass Type Automated Warehouse[D]. Lanzhou:Lanzhou Jiaotong University,2015.
[13]薛婷，苏晓峰，闫起源，等.立体仓库自动仓储控制系统的设计[J].机械制造,2017,55(7):33-36.
XUE Ting, SU Xiaofeng, YAN Qiyuan,et al. Design of Automatic Warehouse Storage Control Sys-
tem for Three-dimensional Warehouse[J].Machinery manufacture,2017,55(7):33-36.
[14]泮家丽，王勇，曹一凡,等.基于虚拟仿真的立体仓库优化设计及“无纸化作业”推进[J].物流技术,2017,36(6):165-169.
PAN Jiali, WANG Yong,CAO Yifan,et al. Optimization of AS/RS and Promotion of Paperless Operarion Based on Virtual Simulation[J]. Logistics Teschnology,2017,36(6):165-169.
[15]刘欣.立体仓库储位优化研究[J].价值工程,2015,34(36):239-241.
LIU Xin. Research on the Storage Position Optimization for Stereoscopic Warehouse[J]. Value Engineering,2015,34(36):239-241.
[16]LENG Jiewu, ZHANG Hao, YAN Douxi,et al.Digital Twin-driven Manufacturing Cyber-physical System for Parallel Controlling of Smart Workshop[J].Journal of Ambient Intelligence and Humanized Computing,2018:1-12.
[17]LIU Qiang, ZHANG Hao, LENG Jiewu, et al. Digital Twin-driven Rapid Individualised Designing of Automated Flow-shop Manufacturing System[J].International Journal of Production Research, 2018.
[18]ZHANG Hao, LIU Qiang, CHEN Xin, et al. A Digital Twin-based Approach for Designing and Multi-objective Optimization of Hollow Glass Production Line[J].IEEE Access, 2017,5: 26901-26911.