大型冷凝器清洗机器人设计及运动学分析

中国机械工程 ›› 2014, Vol. 25 ›› Issue (1): 103-107.

大型冷凝器清洗机器人设计及运动学分析

夏汉民;王耀南;印峰;曹文明

湖南大学，长沙，410082

出版日期:2014-01-10 发布日期:2014-01-14
基金资助:
国家高技术研究发展计划（863计划）资助项目（2008AA04Z214,2007AA04Z244）;国家自然科学基金资助重点项目（60835004); 国家自然科学基金资助项目(60775047);国家科技支撑计划资助项目(2008BAF36B01)；高等学校科技创新工程重大项目（706043）

Design and Kinematics Analysis of Large Condenser Cleaning Robot

Xia Hanming;Wang Yaonan;Yin Feng;Cao Wenming

Hunan University,Changsha,410082

Online:2014-01-10 Published:2014-01-14
Supported by:
National High-tech R&D Program of China (863 Program)（No. 2008AA04Z214,2007AA04Z244）;National Natural Science Foundation of China（No. 60835004, 60775047）;The National Key Technology R&D Program（No. 2008BAF36B01）

摘要/Abstract

摘要：

设计开发了大型冷凝器清洗机器人,该机器人结构简单,易于控制,能够对大型冷凝器进行长期自主在线清洗。建立了冷凝器清洗机器人的运动学模型，进行了正运动学分析和逆运动学分析，解决了关节变量的突变问题。机器人的工作空间能够覆盖整个冷凝器管束的分布空间，具有一定的灵活性。对冷凝器清洗机器人进行了运动学仿真分析,结果表明,该机器人的设计是合理的，能够满足其工作需要，为进一步研究奠定了基础。

关键词: 冷凝器清洗机器人, 运动学, 仿真, 工作空间

Abstract:

A large condenser cleaning robot was designed herein,the structure of which was simple and was easy to control, and can on line clean large condenser automatically for long time. Model of kinematics of the large condenser cleaning robot was founded, and the forward and inverse kinematics of which was analyzed. The catastrophe problem of the robot joint value was solved. The workspace of the robot was verified that covered distribution space of bunches of copper pipes of the condenser and the robot was high flexible. The kinematics of the large condenser cleaning robot was simulated and analyzed, and results indicate the designed end-effector is rational, and can meet the working requirements, which provides theory foundation for further researches.

Key words: condenser cleaning robot, kinematics, simulation, workspace

中图分类号:

S225
TP242.6

夏汉民, 王耀南, 印峰, 曹文明. 大型冷凝器清洗机器人设计及运动学分析[J]. 中国机械工程, 2014, 25(1): 103-107.

Xia Hanming, Wang Yaonan, Yin Feng, Cao Wenming. Design and Kinematics Analysis of Large Condenser Cleaning Robot[J]. China Mechanical Engineering, 2014, 25(1): 103-107.

参考文献

[1]张辉,王耀南,彭金柱.电厂冷凝器清洗机器人设计与控制方法研究[J].湖南大学学报(自然科学版),2008,35(6):31-35.
Zhang Hui,Wang Yaonan,Peng Jinzhu.Research on the Design and Control Strategy of Cleaning Robot for Power Plant Condenser[J].Journal of Hunan University(Natural Science),2008,35(6):31-35.
[2]于靖军,刘新军,丁希仓,等.机器人机构学的数学基础[M].北京:机械工业出版社,2008.
[3]李群智,王树新,丁杰男,等.喉部外科手术机器人系统机构设计与运动学分析[J].机器人,2006,28(6):553-559.
Li Qunzhi,Wang Shuxin,Ding Jienan,et al.Mechanism Design and Kinematics Aanlysis of a Robot-Assinsted Laryngeal Surgery System[J].Robot,2006,28(6):553-559.
[4]印峰,王耀南,余洪山.基于蒙特卡罗方法的除冰机器人作业空间边界提取[J].控制理论与应用,2010,27(7):891-896.
Yin Feng,Wang Yaonan,Yu Hongshan.Workspace Boundary Extraction of Deicing Robot Based on Monte Carlo Method[J]. Control Theory & Applications,2010,27(7):891-896.
[5]姜宏超,刘士荣,张波涛.六自由度模块化机械臂的逆运动学分析[J].浙江大学学报(工学版),2010,44(7):1348-1354.
Jiang Hongchao,Liu Shirong,Zhang Botao.Inverse Kinematics Analysis for 6 Degree of Freedom Modular Manipulator[J]. Journal of Zhejiang University(Engineering Science),2010,44(7):1348-1354.
[6]马博军,方勇纯,张雪波.具有冗余度的移动操作臂逆运动学分析[J].控制工程,2008,15(5):614-618.
Ma Bojun,Fang Yongchun,Zhang Xuebo.Inverse Kinematics Analysis for Mobile Manipulator with Redundant DOFs[J]. Control Engineering of China, 2008, 15(5):614-618.
[7]周风余，李贻斌，王吉贷,等.高压输电线路自动巡线机器人机构设计及在约束条件下的逆运动学分析[J].中国机械工程，2006，17(1):4-8.
Zhou Fengyu,Li Yibin,Wang Jidai,et al. Design of the Mechanical Configuration of Inspection Robot for High Voltage Power Transimission Lines and Analysis on Its Inverse Kinematics with Constraints[J]. China Mechanical Engineering, 2006, 17(1): 4-8.
[8]刘万里，欧阳键飞，曲兴华,等.激光制导测量机器人系统设计及运动学分析[J].机械工程学报，2008，44(9):117-122.
Liu Wangli, Ouyang Jianfei, Qu Xinghua,et al.Design and Kinematics Analysis of Laser Guided Measurement Robot System[J]. Journal of Mechanical Engineering,2008,44(9):117-122.
[9]Tarokh M,Kim M.Inverse Kinematics of 7-DOF Robots and Limb by Decomposition and Approximation[J].IEEE Transations on Robotics,2007,23(3):595-600.
[10]Kucuk S,Bingul Z.The Inverse Kinematics Solution of Fundamental Robot Manipulators with Offset Wrist[C]//Proeedings of the 2005 IEEE International Conference on Mechatronics.Taipei,2005:197-202.
[11]Li Zhiguo,Liu Jizhan,Li Pingping,et al.Analysis of Workspace and Kinematics for a Tomato Harvesting Robot[C]//2008 International Conference on Intelligent Computation Technology and Automation.Changsha,2008:823-827.
[12]Wang Xintao, Duan Xingguang, Huang Qiang.Kinematics and Trajectory Planning of a Supporting Medical Manipulator for Vascular Interventional Surgery[C]//Proceedings of the 2011 IEEE/ICME International Conference on Complex Medical Engineering.Harbin, 2011:406-411.

[1]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[2]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[3]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[4]	尹猛, 徐志刚, 赵志亮, 韩伟, . 基于套索传动的五指灵巧手设计与主从控制[J]. 中国机械工程, 2021, 32(08): 951-959.
[5]	蒲思培. 基于钛酸锂电池的短编组有轨电车车载储能方案仿真分析[J]. 中国机械工程, 2021, 32(07): 875-881.
[6]	孙驰宇, 沈惠平, 袁军堂, 杨廷力. 一种新型半对称三平移一转动（3T1R）并联操作手的运动学研究[J]. 中国机械工程, 2021, 32(06): 638-647.
[7]	许鹏, 曾泓茗, 朱晨露, 王平, 耿明, 许勇. [车辆工程与测控]基于增强磁场涡流的高速轨道缺陷检测方法[J]. 中国机械工程, 2021, 32(04): 454-459,466.
[8]	刘涛1,2;韩炎1,2;孙仁福1,2;赵丁选1,2. 数字型液压变压器动态特性研究[J]. 中国机械工程, 2021, 32(03): 284-289.
[9]	俞轲鑫1；尚群立1；吴欣2. 节流孔板空化特性分析[J]. 中国机械工程, 2021, 32(03): 290-296.
[10]	倪玉吉;王明娣;陈添禹;张晓;倪超;刘金聪. 磁阻式电磁蓄能无针注射系统的设计与实验研究[J]. 中国机械工程, 2021, 32(02): 227-234.
[11]	许志腾;黄辉;崔长彩. 基于线锯高效切割的复杂直纹面模型建立及仿真[J]. 中国机械工程, 2021, 32(01): 47-53.
[12]	饶勇建1,3;付国强1, 2, 3;陶春1,3;高宏力1,3;邓小雷4. 五轴3D打印的通用后置处理[J]. 中国机械工程, 2021, 32(01): 74-81.
[13]	范思敏;肖继明;董永亨;洪贤涛;赵亭. 球头铣刀铣削球面的表面形貌建模与仿真研究[J]. 中国机械工程, 2020, 31(24): 2924-2930，2936.
[14]	龚峻山;方跃法;靳晓东. 基于并联手指结构的多功能灵巧手的设计与研究[J]. 中国机械工程, 2020, 31(23): 2837-2846.
[15]	赵宁1；罗鑫珍1；李文英1；袁召云2. 基于蒙特卡罗仿真的自动仓储系统FEM标准适用性研究[J]. 中国机械工程, 2020, 31(18): 2153-2160.