[1]Bossmanns B, Tu J F. A Thermal Model for High Speed Motorized Spindles[J]. International Journal of Machine Tools and Manufacture, 1999,39 (9):1345-1366.
[2]Lin Chi Wei, Tu J F, Kamman J. An Integrated Thermo- mechanical-dynamic Model to Characterize Motorized Machine Tool Spindles during Ver y High Speed Rotation[J]. International Journal of Machine Tools and Manufacture, 2003, 43 (10): 1035-1050.
[3]Chen Jenq Shyong, Hsu Wei Yao. Characterizations and Models for the Thermal Growth of a Motorized High Speed Spindle[J]. International Journal of Machine Tools and Manufacture, 2003, 43 ( 11 ) : 1163-1170.
[4]黄晓明,张伯霖,肖曙红.高速电主轴热态特性的有限元分析[J].航空制造技术,2003(10):20-23.
[5]范梦吾[1],张伯霖[2],郭军[2],李志英[2].两种电主轴热态特性的比较分析[J].航空制造技术,2004(7):77-79.
[6]Xiao Shuhong, Guo Jim, Zhang Bolin. Research on the Motorized Spindle's Thermal Properties Based on Thermo mechanical Coupling Analysis[C]// International Technology and Innovation Conference. Hangzhou,2006 : 1479-1483.
[7]郭策 [1],孙庆鸿 [2].高速高精度数控车床主轴系统的热特性分析及热变形计算[J].东南大学学报:自然科学版,2005,35(2):231-234.
[8]Huang Chenghung, Lo Hungchi. A Three--dimen sional Inverse Problem in Estimating the Internal Heat Flux of Housing for High Speed Motors[J].Applied Thermal Engineering, 2006, 26 (14/15): 1515-1529.
[9]胡秋[1],何东林[1].数控机床电主轴单元热-结构特性动态分析[J].组合机床与自动化加工技术,2006(12):5-7.
[10]ANSYS Inc. ANSYS CFX--Solver Theory Guide. ANSYS CFX Release 11.0 [CP/DK]. Pittsburgh, Pennsylvania. ANSYS Inc. ,2006.
[11]Huang Chenghuang,Wang Shaopei. A Three--dimensional Inverse Heat Conduction Problem in Estimating Surface Heat Flux by Conjugate Gradient Method[J]. International Journal of Heat and Mass Transfer, 1999,42(18) :3387-3403.
[12]Huang Chenghuang, Chen Weichung. A Three- dimensional Inverse Forced Convection Problem in Estimating Surface Heat Flux by Conjugate Gradient Method[J]. International Journal of Heat and Mass Transfer,2000,43(17) :3171-3181.
[13]Chien C H,Jang J Y. 3--D Numerical and Experimental Analysis of a Built--in Motorized High-speed Spindle with Helical Water Cooling Channel [J]. Applied Thermal Engineering, 2008, 28 (17/ 18) : 2327-2336.
[14]Yang Yu Ching,Chen Wen Lih. An Iterative Regu-larization Method in Simultaneously Estimating the Inlet Temperature and Heattransfer Rate in a Forced-convection Pipe[J].International Journal of Heat and Mass Transfer, 2009,52(7/8) : 1928- 1937. |