摩擦副表面气膜屏蔽微细电解加工微织构及摩擦性能分析

摘要/Abstract

摘要： 采用气膜屏蔽微细电解加工方法在金属平面副、圆柱副表面加工不同阵列形貌微织构。通过试验将该方法与微细电解加工的微织构尺寸精度、表面质量、摩擦性能进行对比，研究结果表明，气膜屏蔽微细电解加工的微织构相比微细电解加工方法加工的微织构平面副及圆柱副凹槽深径比分别提高了约45.6%和25.8%，改善了加工的定域性，提高了加工精度。进一步的摩擦磨损试验结果表明，相较于微细电解加工方法，气膜屏蔽微细电解加工出的平面副及圆柱副微凹槽的表面摩擦因数分别减小了13.6%与16.2%，表面摩擦性能得到了提高。

关键词: 气膜屏蔽微细电解加工, 微织构, 深径比, 摩擦副, 摩擦因数

Abstract: An AS-EMM method was presented to process the micro-structures with different array shapes on planes and cylindrical metal surfaces. Comparisons were carried out between AS-EMM and EMM by analyzing the machining accuracy, surface quality and friction properties of the micro-texture. The results show that the eroded dimple aspect ratios of planes and cylinder pairs are increased by 45.6% and 25.8% respectively which may improve the dissolution localization and the machining precision by AS-EMM. Besides, the friction-wear test results express the 13.6% and 16.2% reduction respectively in average coefficient of friction values on different pairs by AS-EMM.

Key words: air-shielding electrochemical micro machining(AS-EMM), micro texture, aspect ratio, friction pair, friction coefficient

中图分类号:

V261.5

童文俊;王明环;邱国志;许雪峰. 摩擦副表面气膜屏蔽微细电解加工微织构及摩擦性能分析[J]. 中国机械工程.

TONG Wenjun;WANG Minghuan;QIU Guozhi;XU Xuefeng. Analysis of Micro Texture and Friction Properties of Friction Coupling Surfaces Produced by AS-EMM[J]. China Mechanical Engineering.

参考文献

[1]王旭峰. 气膜屏蔽微细电解加工去除机理及工艺研究[D].杭州：浙江工业大学，2017.
WANG Xufeng. Removal Mechanism and Technical Study for Air-shielding Electrochemical Micro Machining[D]. Hangzhou: Zhejiang University of Technology, 2017.
[2]CHO C H, HONG S S, CHONG N C. Micropatterning on Cylindrical Surfaces via Electrochemical Etching Using Laser Masking[J]. Applied Surface Science, 2014, 301(19):442-450.
[3]李小海, 王振龙, 赵万生. 微细电化学加工研究新进展[J]. 电加工与模具, 2004(2):1-5.
LI Xiaohai, WANG Zhenlong, ZHAO Wansheng. New Progress in Micro-electrochemical Machining[J]. Electromachining&Mould, 2004(2):1-5.
[4]苗嘉智, 郭智威, 袁成清. 内燃机缸套-活塞环微织构设计与研究进展[J]. 润滑与密封, 2017, 42(2):124-131.
MIAO Jiazhi, GUO Zhiwei, YUAN Chengqing. Research Progress on Micro-texture of Cylinder Liner-piston Ring in Internal Combustion Engine[J]. Lubrication Engineering, 2017, 42(2):124-131.
[5]RYK G, ETSION I. Testing Piston Rings with Partial Laser Surface Texturing for Friction Reduction[J]. Wear, 2006 (261): 792-796.
[6]刘红彬, 牛荣军, 薛玉君,等. 表面纹理对径向滑动轴承油膜承载能力的影响[J]. 润滑与密封, 2010, 35(7):18-22.
LIU Hongbin, NIU Rongjun, XUE Yujun， et al. The Effect of Surface Textures on Loading Capacity of Journal Bearing Lubricating Film[J]. Lubrication Engineering, 2010, 35(7):18-22.
[7]WANG X, GIOVANNINI M, XING Y, et al. Fabrication and Rribological Behaviors of Corner-cube-like Dimple Arrays Produced by Laser Surface Texturing on Medical Needles[J]. Tribology International, 2015, 92:553-558.
[8]DENKENA B, KASTNER J, WANG B. Advanced Microstructures and Its Production through Cutting and Grinding[J]. CIRP Annals—Manufacturing Technology, 2010, 59(1):67-72.
[9]ZHANG C, BIJAY K S. Investigation on Drag Reduction Performance of Aero Engine Blade with Micro-texture[J]. Aerospace Science & Technology, 2018 (72): 380-396.
[10]BUI Q T, RO S K, PARK J K. A Static Model for Micro-pattern Forming Prediction in Rolling-based Surface Texturing[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(5/8): 2819-2829.
[11]AHUIR-TORRES J I, ARENAS M A, PERRIE W, et al. Surface Texturing of Aluminium Alloy AA2024-T3 by Picosecond Laser: Effect on Wettability and Corrosion Properties[J]. Surface & Coatings Technology, 2017，321: 279-291.
[12]YAMADA H, TAURA H, KANEKO S. Numerical and Experimntal Analyses of the Dynamic Characteristics of Journal Bearings with Square Dimples[J]. Journal of Tribology, 2018, 140: 011703-1-13.
[13]WANG X, KATO K, ADACHI K, et al. Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water[J]. Tribology International, 2003, 36(3):189-197.
[14]邱燕飞, 王成勇, 宋月贤,等. 微磨料空气射流加工玻璃微流道结构研究[J]. 金刚石与磨料磨具工程, 2009(3):32-37.
QIU Yanfei, WANG Chengyong, SONG Yuexian, et al. Micro Channels Machined on Glass by Micro Abrasive Jet Machining[J]. Diamond Abrasives Engineering, 2009(3):32-37.
[15]杨敏, 李寒松, 王国乾,等. MA956高温合金活动模板电解加工小孔技术研究[J]. 电加工与模具, 2016(5):42-46.
YANG Min, LI Hansong, WANG Guoqian, et al. Study on Small Hole Machining of MA956 Superalloys by Electrochem Ical Machining with Movable Cathode Mask[J]. Electromachining Mould, 2016(5):42-46.
[16]CHEN X, QU N, LI H, et al. Electrochemical Micromachining of Micro-dimple Arrays Using a Polydimethylsiloxane (PDMS) Mask[J]. Journal of Materials Processing Tech.： 2016, 229:102-110.
[17]MITCHELL-SMITH J, SPEIDEL A, GASKELL J, et al. Energy Distribution Modulation by Mechanical Design for Electrochemical Jet Processing Techniques[J]. International Journal of Machine Tools & Manufacture, 2017，122:32-46.
[18]NATSU W , IKEDA T , KUNIEDA M . Generating Complicated Surface with Electrolyte Jet Machining[J]. Precision Engineering, 2007, 31(1):33-39.
[19]王明环, 王旭峰, 鲍兆彦,等. 气膜屏蔽微细电解加工方法研究[J]. 机械科学与技术, 2017, 36(12):1891-1895.
WANG Minghuan, WANG Xufeng, BAO Zhao-yan, et al. Investigating Air-shielding Electrochemical Micro Machining [J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36(12):1891-1895.
[20]WANG M H, BAO Z Y, QIU G Z. Fabrication of Micro-dimple Arrays by AS-EMM and EMM[J]. International Journal of Advanced Manufacturing Technology， 2017, 93 (1/4):787-797.