微织构车刀椭圆超声辅助切削加工性能研究

doi:10.3969/j.issn.1004-132X.2023.03.004

中国机械工程 ›› 2023, Vol. 34 ›› Issue (03): 287-291，299.DOI: 10.3969/j.issn.1004-132X.2023.03.004

微织构车刀椭圆超声辅助切削加工性能研究

张硕;邹平;方锐;周亮

东北大学机械工程与自动化学院，沈阳，110819

出版日期:2023-02-10 发布日期:2023-02-27
通讯作者: 邹平（通信作者），男，1963年生，教授、博士研究生导师。研究方向为机床、刀具及切削加工技术。E-mail:pzou@me.neu.edu.cn。
作者简介:张硕，男，1996年生，硕士研究生。研究方向为超声振动辅助加工、微织构刀具切削加工。
基金资助:
国家自然科学基金（51875097）

Study on Elliptical Ultrasonic Assisted Machining Performance of Micro Texture Turning Tools

ZHANG Shuo;ZOU Ping;FANG Rui;ZHOU Liang

School of Mechanical Engineering,Northeasten University,Shenyang,110819

Online:2023-02-10 Published:2023-02-27

摘要/Abstract

摘要： 为了进一步改善切削性能，将微织构刀具应用于椭圆超声辅助切削过程中，分析其对切削力、刀具磨损及表面质量的影响，然后分析刀具表面微织构角度与尺寸对刀具磨损的影响规律。研究结果表明：微织构刀具可以在保留椭圆超声辅助切削优异性能的基础上进一步改善切削性能，而且根据实验结果，微织构角度与尺寸变化会影响刀具抗磨损效果，当微织构与主切削刃平行、宽度为70 μm、间距为70 μm时，刀具黏结磨损最小。

关键词: 椭圆超声辅助切削, 微织构车刀, 切削性能, 微织构角度与尺寸

Abstract: In order to further improve the cutting performance, the micro texture tool was applied to the elliptical ultrasonic assisted cutting processes, and the influences on cutting force, tool wear and surface quality were analyzed. Then the influence laws of tool surface micro texture angle and size on tool wear were analyzed. The results show that the micro texture tool may further improve the cutting performance while retaining the excellent performance of elliptical ultrasonic assisted cutting, and according to the experimental results, the change of micro texture angle and size will affect the wear resistance of the tool, when the micro texture is parallel to the main cutting edge and the width is as 70 μm, spacing is as 70 μm, the tool bond wear is the smallest.

Key words: elliptical ultrasonic assisted cutting, micro-texture tool, cutting performance, micro-texture angle and size

中图分类号:

TH161

张硕, 邹平, 方锐, 周亮. 微织构车刀椭圆超声辅助切削加工性能研究[J]. 中国机械工程, 2023, 34(03): 287-291，299.

ZHANG Shuo, ZOU Ping, FANG Rui, ZHOU Liang. Study on Elliptical Ultrasonic Assisted Machining Performance of Micro Texture Turning Tools[J]. China Mechanical Engineering, 2023, 34(03): 287-291，299.

参考文献

［1］ZHOU J, BUSHLYA V, AVDOVIC P, et al. Study of Surface Quality in High Speed Turning of Inconel 718 with Uncoated and Coated CBN Tools［J］. International Journal of Advanced Manufacturing Technology, 2012, 58(1/4):141-151.
［2］MORIWAKI T, SHAMOTO E. Ultrasonic Elliptical Vibration Cutting［J］. CIRP Annals Manufacturing Technology, 1995, 44(1):31-34.
［3］SHAMOTO E, MORIWAKI T. Study on Elliptical Vibration Cutting［J］. CIRP Annals, 1994, 43(1):35-38.
［4］张翔宇，张德远，隋翯，等.切深对椭圆超声振动切削机理的影响［J］.航空学报,2017,38(4):303-311.
ZHANG Xiangyu, ZHANG Deyuan, SUI He, et al. Influence of Depth of Cut on Epllitical Ultrasonic Vibration Cutting Mechanism［J］. Acta Aeronautica et Astronautica Sinica, 2017,38(4):303-311.
［5］隋翯，张德远，陈华伟，等.超声振动切削对耦合颤振的影响［J］.航空学报,2016,37(5):1696-1704.
SUI He, ZHANG Deyuan, CHEN Weihua, et al. Influence of Ultrasonic Vibration Cutting on Mode-coupling Chatter［J］. Acta Aeronautica et Astronautica Sinica, 2016,37(5):1696-1704.
［6］徐明刚，宋恩禹，张海旭，等.具有沟槽微织构的超硬材料刀具切削仿真与实验研究［J］.表面技术,2021,50(2):363-370.
XU Minggang, SONG Enyu, ZHANG Haixu, et al. Research on the Cutting Simulation and Experiment of Super-hard Material Tool with Grooved Micro Texture［J］.Surface Technology,2021,50(2):363-370.
［7］OBIKAWA T, KAMIO A, TAKAOKA H, et al. Micro-texture at the Coated Tool Face for High Performance Cutting［J］. International Journal of Machine Tools and Manufacture, 2011,21(12):966-972.
［8］潘晨,李庆华,胡恺星,等.微织构刀具对工件表面残余应力影响有限元分析［J］.组合机床与自动化加工技术,2020(1):14-16.
PAN Chen, LI Qinghua, HU Kaixing, et al. The Effect of Mic-textured Tool on Surface Residual Stress of Workpiece Based on Finite Element Analysis［J］. Modular Machine tool & Automatic Manufacturing Technique,2020(1):14-16.
［9］苏永生,李亮,王建彬,等.超硬织构化刀具高速切削钛合金试验研究［J］.表面技术,2018,47(2):249-254.
SU Yongsheng, LI Liang, WANG Jianbin, et al. Super-hard Textured Tools in High Speed Machining Test of Titanium Alloy［J］. Surface Technology,2018,47(2):249-254.
［10］LIU Yayun, DENG Jianxin, WANG Wei , et al. Effect of Texture Parameters on Cutting Performance of Flank-faced Textured Carbide Tools in Dry Cutting of Green Al2O3 Ceramics［J］. Ceramics International, 2018,44(11):13205-13217.
［11］何宇，邹平，王春雨，等.应用微织构刀具的超声椭圆振动辅助切削研究［J］.电加工与模具，2019(4):58-62.
HE Yu, ZOU Ping, WANG Chunyu, et al. Research of Ultrasonic Elliptical Vibration Cutting with Textured Insert［J］. Electromachining & Mould, 2019(4):58-62.
［12］唐军，陈小静，赵波.微织构刀具超声铣削航空铝合金的研究［J］.表面技术,2021,50(5):356-363.
TANG Jun, CHEN Xiaojing, ZHAO Bo. Experimental Study on the Milling Aviation Aluminum Alloy with Micro Texture Ultrasonic Cutter［J］. Surface Technology,2021,50(5):356-363.
［13］李勋,张德远.不分离型超声椭圆振动切削试验研究［J］.机械工程学报,2010,46(19):177-182.
LI Xun, ZHANG Deyuan. Experimental Study on the Unseparated Ultrasonic Elliptical Vibration Cutting［J］. Journal of Mechanical Engineering, 2010,46(19):177-182.

[1]	吴振宇, 郑光明, 颜培, 杨先海, 赵光喜, 李学伟. 表面处理对TiAlSiN涂层刀具表面完整性及切削性能的影响研究[J]. 中国机械工程, 2023, 34(01): 75-83.
[2]	于良, 郑光明, 杨先海, 程祥, 常垲硕, 李学伟. 深冷处理对PCBN刀具切削性能的影响研究[J]. 中国机械工程, 2022, 33(20): 2450-2458.
[3]	关集俱, 高超, 徐正亚, 丁云鹏, 李特, 许雪峰. 多壁碳纳米管/油酸复合物纳米流体车削GCr15钢的性能研究[J]. 中国机械工程, 2022, 33(18): 2205-2214，2226.
[4]	范庆波, 杨帆, 关晓艳, 李浩, 樊小强, 朱旻昊. TiVN涂层的耐磨性与切削性能的关联研究[J]. 中国机械工程, 2022, 33(12): 1493-1503.
[5]	余建杭, 颜培, 范雷, 顾慧卿, 焦黎, 仇天阳, 王西彬. 相态对镍钛合金清洁切削性能和表面完整性的影响[J]. 中国机械工程, 2022, 33(05): 569-576.
[6]	衣明东, 王建平, 李传浩 , 许崇海, . 双重润滑条件下的刀具切削特性研究[J]. 中国机械工程, 2022, 33(05): 615-622.
[7]	曹同坤, 徐英涛, 谈庆瑶. 在刀-屑界面持续润滑刀具切削45钢的性能及润滑机理[J]. 中国机械工程, 2021, 32(20): 2411-2417，.
[8]	李勇, 杨晓京. 纳米尺度单晶铜材料表面切削特性分子动力学模拟[J]. 中国机械工程, 2016, 27(06): 721-726.
[9]	周咏辉;艾兴;赵军;薛强;. Al₂O₃/(W,Ti)C纳米复合陶瓷刀具材料的制备及切削性能研究[J]. J4, 2009, 20(22): 0-2771.
[10]	赵金龙;邓建新;颜培;. MoS₂/Zr复合涂层高速钢刀具的切削性能研究[J]. J4, 2008, 19(21): 0-2524.
[11]	沈彬;孙方宏;薛宏国;陈明;张志明. 高性能复杂形状金刚石薄膜涂层刀具的制备和切削性能研究[J]. J4, 2008, 19(19): 0-2354.

微织构车刀椭圆超声辅助切削加工性能研究

Study on Elliptical Ultrasonic Assisted Machining Performance of Micro Texture Turning Tools

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics