[数据驱动的产品设计]复杂产品设计方案的数据驱动多属性优化决策

摘要/Abstract

摘要：

目前产品设计方案的优劣主要依赖于设计者的经验和水平。提出了一种数据驱动的产品设计方案多属性决策方法，可以应用于产品设计各个阶段的方案评估择优。每一组评审者应用理想解排序方法对方案进行评估，对于决策准则的权重，采用熵权法确定其权值，应用Borda函数法对各组人员的决策进行集结，得到最终的决策结果，完成对设计方案的综合评估。该方法对数据的使用更加充分，最大程度避免了主观性，评价结果更为合理。最后，将该方法应用于油田聚合物注入装置的设计方案择优，集结了设计、工艺、管理人员的意见，提供了更为全面的优化决策结果。

关键词: 数据驱动决策, 逼近理想解的排序法, 熵法, 波达函数, 产品设计方案

Abstract: At present, the quality of product design scheme mainly depended on the experiences and levels of designers, to solve this problem, a data-driven multi-attribute decision-making method for product design schemes was proposed, which might be applied to the evaluation of the best program at all stages of product design. Each group of reviewers used the TOPSIS method to evaluate the scheme, for the weight of decision criteria, the entropy weight method was used to determine the weights, the Borda function method was applied to assemble the decisions of each group, the final decision results were obtained, and the comprehensive evaluations of the design scheme were completed. This method was more fully used for data, avoiding subjectivity to the greatest extent, and the evaluation results were more reasonable. Finally, the method was applied to the design of oilfield polymer injection devices, and the opinions of designers, processors and managers are gathered to provide more comprehensive optimization decision results.

Key words: data-driven decision-making； technique for order preference by similarity to an ideal solution(TOPSIS)； entropy method； Borda function, product design scheme

中图分类号:

TH16
TP391

吴扬东, 张太华, 刘丹, 王宜全. [数据驱动的产品设计]复杂产品设计方案的数据驱动多属性优化决策[J]. 中国机械工程.

WU Yangdong, ZHANG Taihua, LIU Dan, WANG Yiquan. Data-driven Multi-attribute Optimization Decision-making for Complex Product Design Schemes[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2020/V31/I07/865

参考文献

[1]杨楠，叶迪，林杰，等.基于数据驱动具有自我学习能力的机组组合智能决策方法研究[J].中国电机工程学报，2019，39(10):2934-2945.

YANG Nan, YE Di, LIN Jie，et al.Research on Data-driven Intelligent Security-constrained Unit Commitment Dispatching Method with Self-learning Ability[J].Proceedings of the Chinese Society for Electrical Engineering，2019，39(10):2934-2945.

[2]王发麟,廖文和,郭宇，等.复杂机电产品中线缆敷设质量评估的变精度粗糙集决策方法[J]. 中国机械工程，2015，26(15): 2062-2068.

WANG Falin, LIAO Wenhe, GUO Yu，et al. Variable Precision Rough Set Decision-making Method for Quality Assessment of Cable Harness Wiring in Complex Mechatronic Product[J].China Mechanical Engineering，2015，26(15):2062-2068.

[3]张洁,高亮,秦威，等.大数据驱动的智能车间运行分析与决策方法体系[J]. 计算机集成制造系统，2016，22(5):1020-1028.

ZHANG Jie,GAO Liang,QIN Wei，et al. Big-data-driven Operation Alanalysis and Decision-making Methodology in Intelligent Workshop[J].Computer Integrated Manufacturing Systems,2016,22(5):1020-1028.

[4]张红旗,邵晓东,胡祥涛. 基于部分可观察马尔可夫决策过程的机电装备动态可靠性评价方法[J]. 中国机械工程，2016，27(18): 2482-2487.

ZHANG Hongqi, SHAO Xiaodong,HU Xiangtao. Dynamic Reliability Assessment Method Based on POMDP for Electromechanical Equipment[J]. China Mechanical Engineering，2016，27(18)：2482-2487.

[5]李艳姣, 张森, 尹怡欣.基于数据驱动的高炉料面优化决策模型研究[J]. 控制理论与应用，2018，35(3)：324-334.

LI Yanjiao, ZHANG Sen, YIN Yixin. Research on Optimization Model of Blast Furnace Burden Surface Based on Data Driven[J]. Control Theory & Applications，2018，35(3)：324-334.

[6]AFRIN K, NEPAL B, MONPLAISIR L. A Data-driven Framework to New Product Demand Prediction: Integrating Product Differentiation and Transfer Learning Approach[J]. Expert Systems with Applications, 2018,18: 246-257.

[7]DU Xianping, ZHU Feng. A New Data-driven Design Methodology for Mechanical Systems with Highdimensional Design Variables[J]. Advances in Engineering Software, 2018,117: 18-28.

[8]SADATI N, CHINNAM R B, NEZHAD M Z. Observational Data-driven Modeling and Optimization of Manufacturing Processes[J]. Expert Systems with Applications, 2018,93: 456-464.

[9]ALESSANDRO B. Role and Challenges of Data-driven Design in the Product Innovation Process[J].IFAC PapersOnLine, 2018, 51/11:1107-1112.

[10]RUVALD R, FRANK M, JOHANSSON C. Data Mining through Early Experience Prototyping-a step towards Data Driven Product Service System Design[J]. IFAC PapersOnLine, 2018, 51/11:1095-1100.

[11]GHOSAL S, DEY S, BHATTACHARYYA P，et al. Data-driven Design of Ternary Alloy Catalysts for Enhanced Oxide-based Gassensors’ Performance[J]. Computational Materials Science, 2019,161: 255-260.

[12]NOVARA C, FORMENTIN S, SAVARESI S M，et al. Data-driven Design of Two Degree-of-freedom Nonlinear Controllers:the D2-IBC Approach[J]. Automatica, 2016,72: 19-27.

[13]CHIU M C, LIN K Z.Utilizing Text Mining and Kansei Engineering to Support Data-driven Design Automation at Conceptual Design Stage[J]. Advanced Engineering Informatics, 2018,38: 826-839.

[14]陈宇,王娜,王晋东.利用三角模糊数的语言变量项集减项算法[J]. 清华大学学报(自然科学版)，2017，57(8): 892-896.

CHEN Yu, WANG Na, WANG Jindong. An N-fold Reduction of Linguistic Variables Based on the Triangular Fuzzy Numbers[J]. Journal of Tsinghua University(Science&Technology)，2017，57(8)：892-896.

[15]岳超源.决策理论与方法[M].北京：科学出版社， 2018:212-213.

YU Chaoyuan.Decision Theory and Method[M]. Beijing: Science Press, 2018:212-213.

[16]谢季坚,刘承平.模糊数学方法及其应用[M]. 武汉：华中科技大学出版社，2013:128-129.

XIE Jijian, LIU Chengping.Fuzzy Mathematics Method and Its Application[M]. Wuhan: Huazhong University of Science and Technology Press, 2013:128-129.