[1]BISSACCO G, HANSEN H N, TRISTO G, et al.Feasibility of Wear Compensation in Micro EDM Milling Based on Discharge Counting and Discharge Population Characterization[J].CIRP Annals:Manufacturing Technology, 2011, 60(1):231-234.
[2]JAHAN M P, WONG Y S, RAHMAN M.A Study on the Quality Micro-hole Machining of Tungsten Carbide by Micro-EDM Process Using Transistor and RC-type Pulse Generator[J].Journal of Materials Processing Tech., 2009, 209(4):1706-1716.
[3]黄瑞宁,李毅,刘晓飞.节能型电火花加工脉冲电源的研究[J].中国机械工程, 2016, 27(18):2520-2523.
HUANG Ruining, LI Yi, LIU Xiaofei.Research on Energy Saving EDM Pulse Power Supply[J].China Mechanical Engineering, 2016, 27(18):2520-2523.
[4]FAN Y, BAI J, LI Q, et al. Research on Maintaining Voltage of Spark Discharge in EDM[J]. Procedia CIRP, 2016, 42:28-33.
[5]李文卓,刘晋春,赵万生,等. 皮焦级超微能电火花加工电源技术研究[J]. 哈尔滨工业大学学报, 2009(1):197-199.
LI Wenzhuo, LIU Jinchun, ZHAO Wansheng, et al. Research on the Power Source Technology of Pico Level Ultramicro EDM[J]. Journal of Harbin Institute of Technology, 2009 (1):197-199.
[6]HAN F, WACHI S, KUNIEDA M. Improvement of Machining Characteristics of Micro-EDM Using Transistor Type Isopulse Generator and Servo Feed Control[J]. Precision Engineering, 2004, 28(4):378-385.
[7]KUNIEDA M, HAYASAKA A, YANG X D, et al. Study on Nano EDM Using Capacity Coupled Pulse Generator[J]. CIRP Annals:Manufacturing Technology, 2007, 56(1):213-216.
[8]YAHAGI Y, KOYANO T, KUNIEDA M, et al. Micro Drilling EDM with High Rotation Speed of Tool Electrode Using the Electrostatic Induction Feeding Method[J]. Procedia CIRP, 2012, 1(1):162-165.
[9]ABBAS N M, KUNIEDA M. Increasing Discharge Energy of Micro-EDM with Electrostatic Induction Feeding Method through Resonance in Circuit[J]. Precision Engineering, 2016, 45:118-125.
[10]YAN M T, LAI Y P. Surface Quality Improvement of Wire-EDM Using a Fine-finish Power Supply[J]. International Journal of Machine Tools & Manufacture, 2007, 47(11):1686-1694.
[11]HAN F, JIANG J, YU D. Influence of Discharge Current on Machined Surfaces by Thermo-analysis in Finish Cut of WEDM[J]. International Journal of Machine Tools & Manufacture, 2007, 47(7):1187-1196.
[12]CHU X, FENG W, WANG C, et al. Analysis of Mechanism Based on Two Types of Pulse Generators in Micro-EDM Using Single Pulse Discharge[J]. International Journal of Advanced Manufacturing Technology, 2017, 89(9/12):3217-3230.
[13]IKAI T, HASHIGUSHI K. Heat Input for Crater Formation in EDM[C]∥Proceedings of International Symposium for Electromachining. Lausanne,1995:163-170.
[14]IZQUIERDO B, SáNCHEZ J A, PLAZA S, et al. A Numerical Model of the EDM Process Considering the Effect of Multiple Discharges[J]. International Journal of Machine Tools & Manufacture, 2009, 49(3):220-229.
[15]CHICHKOV B N, MOMMA C, NOLTE S, et al. Femtosecond, Picosecond and Nanosecond Laser Ablation of Solids[J]. Applied Physics A, 1996, 63(2):109-115.
[16]ABBAS N M, KUNIEDA M. Micro-EDM with Controlled Pulse Train Method Using Small Feeding Capacitance[J]. Procedia CIRP, 2016, 42:737-742.
[17]王学志. 静电感应微细电火花加工放电特性与伺服控制研究[D]. 哈尔滨:哈尔滨工业大学, 2011:21-26.
WANG Xuezhi. Discharge Characteristics and Servo Control of Electrostatic Induction Micro EDM[D]. Harbin:Harbin Institute of Technology, 2011:21-26.
[18]李志永,李丽,郑光明. 涡轮叶片冷却孔电火花加工管电极的铜电铸层制备及其抗电蚀性[J]. 中国机械工程, 2017, 28(10):1195-1201.
LI Zhiyong, LI Li, ZHENG Guangming. Preparation of Copper Electroforming Layer of EDM Tube Electrode for Turbine Blade Cooling Hole and Its Resistance to Electrical Corrosion[J]. China Mechanical Engineering, 2017, 28(10):1195-1201. |