[1]HELD M. VRONI:An Engineering Approach to the Reliable and Efficient Computation of Voronoi Diagrams of Points and Line Segments[J]. Computational Geometry, 2001, 18(2):95-123.
[2]SHUNMUGAM M S, REDDY S V B, NARENDRAN T T. Selection of Optimal Conditions in Multi-pass Face-milling Using a Genetic Algorithm[J]. International Journal of Machine Tools & Manufacture, 2000, 40(3):401-414.
[3]汤爱民, 周志雄, 肖思来,等. 基于铣削快速落刀法的切削颤振研究[J]. 中国机械工程, 2011, 22(19):2274-2278.
TANG Aimin, ZHOU Zhixiong, XIAO Silai, et al. Study on Cutting Chatter Based on Fast Tool-off Milling[J]. China Mechanical Engineering,2011,22(19):2274-2278.
[4]ALTINTAS Y, BUDAK E. Analytical Prediction of Stability Lobes in Milling[J]. CIRP Annals—Manufacturing Technology, 1995, 44(1):357-362.
[5]BUDAK E, ALTINTAS Y. Analytical Prediction of Chatter Stability in Milling—Part I:General Formulation[J]. ASME Journal of Dynamic Systems Measurement & Control, 1998, 120(1):31-36.
[6]INSPERGER T, MANN B P, STEPAN G, et al. Stability of Up-milling and Down-milling, Part 1:Alternative Analytical Methods[J]. International Journal of Machine Tools & Manufacture, 2003, 43(1):25-34.
[7]INSPERGER T, STEPAN G. Semi-discretization Method for Delayed Systems[J]. International Journal for Numerical Methods in Engineering, 2010, 55(5):503-518.
[8]INSPERGER T, STEPAN G. Updated Semi-discretization Method for Periodic Delay-differential Equations with Discrete Delay[J]. International Journal for Numerical Methods in Engineering, 2010, 61(1):117-141.
[9]DING Y, ZHU L M, ZHANG X J, et al. A Full-discretization Method for Prediction of Milling Stability[J]. International Journal of Machine Tools & Manufacture, 2010, 50(5):502-509.
[10]DING Y, ZHU L M, ZHANG X J, et al. Numerical Integration Method for Prediction of Milling Stability[J]. Journal of Manufacturing Science & Engineering, 2011, 133(3):031005.
[11]DING Y, ZHU L, ZHANG X, et al. Spectral Method for Prediction of Chatter Stability in Low Radial Immersion Milling[C]∥2011 IEEE International Conference on Robotics and Automation. Shanghai, 2011:4359-4363.
[12]ISMAIL F, SOLIMAN E. A New Method for the Identification of Stability Lobes in Machining[J]. International Journal of Machine Tools & Manufacture, 1997, 37(6):763-774.
[13]ALTINTAS Y. Manufacturing Automation:Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design[M]. New York:Cambridge University Press, 2012:43-47
[14]ALTINTAS Y, STEPAN G, MERDOL D, et al. Chatter Stability of Milling in Frequency and Discrete Time Domain[J]. Journal of Manufacturing Science & Technology, 2009, 1(1):35-44.
[15]宋清华. 高速铣削稳定性及加工精度研究[D].济南:山东大学, 2009.
SONG Qinghua. High Speed Milling Stability and Machining Accuracy[D]. Jinan:Shandong University, 2009.
[16]丁烨. 铣削动力学-稳定性分析方法与应用[D].上海:上海交通大学, 2011.
DING Ye. Milling Dynamics-stability Analysis Methods and Applications[D]. Shanghai:Shanghai Jiao Tong University, 2011 |