关键词: 薄壁件, 机器人铣削, 切深控制, 模糊线性自抗扰控制, 音圈电机, 随动支撑头

Abstract: Weakly rigid large thin-walled parts had large deformations and vibrations during robotic thinning machining, which led to a degradation of the surface quality of the workpieces and difficulties in ensuring the accuracy of the remaining wall thickness. To this end, a VCM-driven follower support head was used for vibration and deformation suppression, and a FLADRC based control strategy was proposed for depth of cut of robotic milling thin-walled parts. In order to verify the effectiveness of the control strategy, the system control models were firstly established based on the MATLAB/Simulink simulation and experimental platform, and the simulation analysis was carried out, then experimental verification was carried out on the thin-walled parts robotic milling experiment platform. Both of the simulation and experimental results show that the depth-of-cut control strategy based on the follower support head may significantly suppress the vibrations and deformations during the machining processes of thin-walled parts and effectively ensure the accuracy of the remaining wall thickness. In addition, compared with the traditional fuzzy PID control, the FLADRC has a better control effectiveness and exhibits higher robustness in the presence of external disturbances.

Key words: thin-walled part, robotic milling, depth of cut control, fuzzy linear active disturbance rejection controller(FLADRC), voice coil motor（VCM）, follower support head