[1]郑远谋.机械加工和表面粗糙度对金属材料硬度测试数据的影响[J].理化检验(物理分册),2000,36(11):486-489.
ZHENG Yuanmou. The Effect of Mechanical Processing and Surface Roughness to Metal's Hardness Measurent [J]. Physical Testing and Chemical Analysis(Part A: Physical Testing), 2000,36(11):486-489.
[2]LIN Tao, HU Yong, KONG Lingti, et al. Effect of Surface Roughness on Plasticity of Zr52.5Cu17.9Ni14.6Al10Ti5 Bulk Metallic Glass[J].Transactions of Nonferrous Metals Society of China,2012,22(6): 1407-1411.
[3]张霖,赵东标,张建明,等. 微细端铣削工件表面粗糙度的研究[J].中国机械工程,2008,19(6):658-661.
ZHANG Lin, ZHAO Dongbiao, ZHANG Jianming, et al. Study on Surface Roughness of Part in the Micro-end-milling Process [J]. China Mechanical Engineering, 2008,19(6):658-661.
[4]LIN Songsheng, ZHOU Kesong, DAI Mingjiang, et al. Effects of Surface Roughness of Substrate on Properties of Ti/TiN/Zr/ZrN Multilayer Coatings[J].Transactions of Nonferrous Metals Society of China,2015, 25(2): 451-456.
[5]韩香娥, 吴振森. 金属基及涂层表面粗糙度的测量方法研究[J]. 应用光学,1996,17(1):38-43.
HAN Xiang'e, WU Zhensen. Study of Measuring Method of Surface Roughness for Metal Base and Coating [J]. Journal of Applied Optics, 1996, 17(1):38-43.
[6]赵学增, 周莉莉, 王伟杰. 入射角对激光散斑测量表面粗糙度的影响[J]. 中国机械工程, 2003, 14(7): 563-564.
ZHAO Xuezeng, ZHOU Lili, WANG Weijie. Influence of Incidence Angle on the Measurement of Surface Roughness by Laser Speckle [J]. China Mechanical Engineering, 2003, 14(7): 563-564.
[7]卢超, 邬冠华, 马国威. 航空钛合金板胶接表面粗糙度的超声测量[J].测试技术学报,2008, 22(1):59-65.
LU Chao, WU Guanhua, MA Guowei. Improved Pulsed Ultrasonic Spectroscopy for Adhesive Surface Roughness Measurement of Aerial Titanium Alloy Plates [J]. Journal of Test and Measurement Technology, 2008, 22(1):59-65.
[8]BLESSINGN G V, EITZEN D G. Ultrasonic Sensor for Measuring Surface Roughness[C]//Congress on Optical Science and Engineering. International Society for Optics and Photonics. Hamburg, 1989: 281-289.
[9]GATABI J R,GATABI I R. A Novel Doppler Based Ultrasonic Surface Roughness Measurement[C]//Proceedings of 2005 IEEE International Ultrasonics Symposium.Rotterdam,Netherlands,2005:1460-1463.
[10]姜万录, 吴胜强, 刘思远. 指数加权动态核主元分析法及其在故障诊断中应用[J]. 机械工程学报, 2011, 47(3): 63-68.
JANG Wanlu, WU Shengqiang, LIU Siyuan. Exponentially Weighted Dynamic Kernel Principal Component Analysis Algorithm and Its Application in Fault Diagnosis [J]. Journal of Mechanical Engineering, 2011, 47(3): 63-68.
[11]张敏龙, 王涛, 王旭平,等.分步动态自回归核主元分析及其在故障诊断中应用[J].计算机应用, 2016,36(5): 1464-1468.
ZHANG Minlong, WANG Tao, WANG Xuping,et al. Step Dynamic Auto-regression Kernel Principal Component Analysis and Its Application in Fault Diagnosis [J]. Journal of Computer Applications,2016,36(5):1464-1468.
[12]NAGY P B, ADLER L. Surface Roughness Induced Attenuation of Reflected and Transmitted Ultrasonic Waves[J].The Journal of the Acoustical Society of America,1987, 82(1): 193-197.
[13]张晨昕, 李雄兵, 宋永锋,等. 考虑水声距的晶粒尺寸超声衰减评价模型[J].中南大学学报 (自然科学版), 2016, 47(4): 1151-1157.
ZHANG Chenxin, LI Xiongbing, SONG Yongfeng,et al. Ultrasonic Attenuation Evaluation Model of Grain Size Considering Water Depth [J]. Journal of Central South University (Science and Technology), 2016, 47(4): 1151-1157.
[14]余建波. 基于智能学习模型的制造过程质量控制理论与方法论研究[D].上海:上海交通大学,2009: 53-55.
YU Jianbo. Studying of Manufacturing Process Quality Control Theory and Methodology Based on Intelligent Learning Model [D]. Shanghai: Shanghai Jiao Tong University, 2009: 53-55.
[15]周克省.大学物理实验教程[M].长沙:中南大学出版社, 2001:21-27.
ZHOU Kesheng. University Physics Experiment Course [M]. Changsha: Central South University Press, 2001:21-27.
[16]RAJ B, JAYAKUMAR T,PALANICHAMY P,等. 超声波无损检测对缺陷、微观组织和残余应力的测定[J].中国机械工程, 1997,8(3):7-9.
RAJ B, JAYAKUMAR T,PALANICHAMY P,et al. Ultrasonic Nondestructive Testing of Defects, Microstructure and Residual Stress [J]. China Mechanical Engineering,1997, 8(3):7-9.
[17]马世伟, 袁康. SUS306 不锈钢平均晶粒尺寸的超声无损检测及其评价[J]. 上海大学学报, 2010, 16(2):125-129.
MA Shiwei, YUAN Kang. Nondestructive Ultrasound Test and Evaluation of Average Grain Diameter in Sus306 Stainless Steel [J]. Journal of Shanghai University, 2010, 16(2):125-129.
[18]LI Xiongbing, HAN Xiaoqin, ARGUELLES A P, et al. Evaluating Grain Size in Polycrystals with Rough Surfaces by Corrected Ultrasonic Attenuation[J]. Ultrasonics, 2017, 78: 23-29. |