[1]IJOMAH W L, CHILDE S J. A Model of the Operations Concerned in Remanufacture [J]. International Journal of Production Research, 2007, 45(24):5857-5880.
[2]薛臣, 江志刚, 张旭刚,等. 废旧机械装备零部件重用组合多目标优化模型及应用[J]. 机械工程学报, 2017, 53(5):76-85.
XUE Chen, JIANG Zhigang, ZHANG Xugang, et al. Multi-objective Optimization Model and Application of Components Reuse Combination for Used Mechanical Equipment [J]. Journal of Mechanical Engineering, 2017, 53(5):76-85.
[3]QIAN X F, LI X, XU S, et al. Critical Component Life Prediction and Cost Estimation for Decision Support in Remanufacturing[C]//Emerging Technologies & Factory Automation. Luxembourg: IEEE, 2015:1-8.
[4]LIU M, KE Q, SONG S, et al. Active Remanufacturing Timing Determination Based on Failure State Assessment[M]//Re-engineering Manufacturing for Sustainability. Singapore: Springer, 2013:615-619.
[5]HU Y, LIU S, LU H, et al. Remaining Useful Life Assessment and Its Application in the Decision for Remanufacturing [J]. Procedia CIRP, 2014, 15(15):212-217.
[6]SONG S X, TAI Y Y, KE Q D. Establishment and Application of Service Mapping Model for Proactive Remanufacturing Impeller[J]. Journal of Central South University, 2016, 23(12):3143-3152.
[7]ZHOU X, KE Q, SONG S, et al. An Evaluation Method Based on Mechanical Parts Structural Characteristics for Proactive Remanufacturing [J]. Procedia CIRP, 2014, 15:207-211.
[8]DU Y, CAO H, CHEN X, et al. Reuse-oriented Redesign Method of Used Products Based on Axiomatic Design Theory and QFD[J]. Journal of Cleaner Production, 2013, 39(1):79-86.
[9]QIAN W, YIN X, XIE L, et al. Intelligent Analysis Method of Mechanical Structure Performance[C]// International Forum on Information Technology and Applications. Chengdu: IEEE, 2009:113-116.
[10]汪伟. 基于零件结构耦合理论的主动再制造设计[D]. 合肥:合肥工业大学, 2017.
WANG Wei.Design Method of Predecisional Remanufacturing Based on Component Structure Coupling Theory [D]. Hefei: Hefei University of Technology, 2017.
[11]宋守许, 刘明, 刘光复,等. 现代产品主动再制造理论与设计方法[J]. 机械工程学报, 2016, 52(7):133-141.
SONG Shouxu, LIU Ming, LIU Guangfu, et al. Theories and Design Methods for Proactive Remanufacturing of Modern Products[J]. Journal of Mechanical Engineering, 2016, 52(7):133-141.
[12]周美立. 单元化系统集成设计中的相似性与复杂性[J]. 中国机械工程, 2004, 15(7):604-607.
ZHOU Meili. Similarity and Complexity in Unitization System Intergrated Design[J]. China Mechanical Engineering, 2004, 15(7):604-607.
[13]谢季坚, 刘承平. 模糊数学方法及其应用[M]. 武汉: 华中科技大学出版社, 2000.
XIE Jijian, LIU Chenping. Fuzzy Mathematics Method and Its Application[M]. Wuhan: Huazhong University of Science and Technology Press, 2000.
[14]张小丽, 陈雪峰, 李兵,等. 机械重大装备寿命预测综述[J]. 机械工程学报, 2011, 47(11):100-116.
ZHANG Xiaoli, CHEN Xuefeng, LI Bing, et al. Review of Life Prediction for Mechanical Major Equipments[J]. Journal of Mechanical Engineering, 2011, 47(11):100-116.
[15]温诗铸, 黄平. 摩擦学原理[M].4版.北京: 清华大学出版社, 2012.
WEN Shizhu, HUANG Ping. Principles of Tribology[M].4th ed. Bejing: Tsinghua University Press 2012.
[16]姚卫星. 结构疲劳寿命分析[M]. 北京: 国防工业出版社, 2003.
YAO Weixing. Structural Fatigue Life Analysis[M]. Beijing: National Defense Industry Press, 2003.
[17]武秀根, 郑百林, 杨青,等. 疲劳累积损伤理论在曲轴疲劳分析中的应用[J]. 同济大学学报(自然科学版), 2008, 36(5):655-658.
WU Xiugen, ZHENG Bailin, YANG Qing, et al. Application of Damage Summation to Fatigue Analysis of Crankshaft[J]. Journal of Tongji University(Natural Science), 2008, 36(5):655-658.
[18]YANG L, FATEMI A. Cumulative Fatigue Damage Mechanisms and Quantifying Parameters: a Literature Review[J]. Journal of Testing and Evaluation, 1998, 26(2):89-100.
[19]周旋. 机电产品主动再制造设计及时机调控方法[D]. 合肥:合肥工业大学, 2015.
ZHOU Xuan. Proative Remanufacturing Design and Timing Control Method of Electromechanical Products[D]. Hefei: Hefei University of Technology, 2015.
[20]黄宁. 大型结构件的疲劳寿命预测方法研究[D]. 长沙:中南大学, 2013.
HUANG Ning. Research on Fatigue Life Prediction Methods for Large-scale Components[D]. Changsha: Central South University, 2013.
[21]闫国华, 朱永生. 支持向量机回归的参数选择方法[J]. 计算机工程, 2009, 35(14):218-220.
YAN Guohua, ZHU Yongsheng. Parameters Selection Method for Support Vector Machine Regression[J]. Computer Engineering, 2009, 35(14):218-220.
[22]SONG Shouxu, TAI Yingying, KE Qingdi. Establishment and Application of the Service Mapping Model for Proactive Remanufacturing Impeller[J]. Journal of Central South University, 2016, 23(12):3143-3152.
[23]成心德. 叶片式泵、通风机、压缩机:原理、设计、运行、强度) [M]. 北京:机械工业出版社, 2011.
CHEN Xinde. Vane Type Pump, Fan, Compressor(Principle, Design, Operation, Strength)[M]. Beijing: China Machine Press, 2011.
[24]祁大同. 离心式压缩机原理[M]. 北京:机械工业出版社, 2017.
QI Datong. Principle of Centrifugal Compressor [M]. Beijing: China Machine Press, 2017.
[25]邰莹莹. 大型离心压缩机叶轮服役映射模型与主动再制造优化设计[D]. 合肥:合肥工业大学, 2016.
TAI Yingying. The Service Mapping Model of Centrifugal Compressor Impeller and Proactive Remanufacturing Optimization Design[D]. Hefei: Hefei University of Technology, 2016.
[26]SIVAPRASAD S, NARASAIAH N, DAS S K, et al. Investigation on the Failure of Air Compressor[J]. Engineering Failure Analysis, 2010, 17(1):150-157. |