基于全矢谱时间固有尺度分解和独立分量分析盲源分离降噪的滚动轴承故障特征提取

摘要/Abstract

摘要： 结合盲源分离技术和全矢谱技术的各自优势，提出一种同源双通道信噪盲源分离法。首先采用时间固有尺度分解（ITD）和独立分量分析（ICA）相结合的分析法降噪，对同源双通道的轴承信号进行ITD分解，根据相关系数准则将分解得到的PRC分量进行重组作为ICA输入矩阵，再采用FastICA解混，实现故障信号与噪声信号的分离；其次采用全矢谱技术对信噪分离降噪后的双通道有效分量信号进行全矢信息融合，做全矢谱分析。滚动轴承故障实验对比分析表明了该方法的有效性。

关键词: , 时间固有尺度分解, 盲源分离, 独立分量分析, 全矢谱

Abstract: The advantages of blind source separation and full vector spectrum technology were combined, and a method of signal noise ratio(SNR) of blind source separation for two channels was presented. Firstly, the ITD and ICA method were combined to reduce noises. The vibration signals of two channels were decomposed by ITD. The proper rotation components(PRC) were decomposed by correlation coefficient criterion restructuring as the inputs of ICA matrix. FastICA was used to realize the separation of fault signals and noise signals. Secondly, the full vector spectrum technology was used to carry out the full vector information fusion of the two channel fault signals and full vector spectrum analysis was completed after reducing noises. The comparison of experiments of rolling bearing fault analyses indicates the effectiveness of the method.

Key words: inherent time scale decomposition(ITD), blind source separation, independent component analysis(ICA), full vector spectrum

中图分类号:

TH133.33

刘嘉辉;董辛旻;李剑飞. 基于全矢谱时间固有尺度分解和独立分量分析盲源分离降噪的滚动轴承故障特征提取[J]. 中国机械工程.

LIU Jiahui;DONG Xinmin;LI Jianfei. Fault Feature Extraction of Rolling Bearings Based on Noises Reduced by Full Vector Spectrum ITD-ICA Blind Source Separation[J]. China Mechanical Engineering.

参考文献

[1]陈恩利,张玺,申永军,等.基于SVD降噪和盲信号分离的滚动轴承故障诊断[J].振动与冲击,2012,31(23):185-190.
CHEN Enli, ZHANG Xi, SHEN Yongjun, et al. Fault Diagnosis of Rolling Bearings Based on SVD De-noising and Blind Signals Separation[J].Journal of Vibration and Shock,2012,31(23):185-190.
[2]柏林,陆超,赵鑫,等.基于ITD与ICA的滚动轴承故障特征提取方法[J].振动与冲击,2015,34 (14): 153-156.
BO Lin, LU Chao, ZHAO Xin, et al. Fault Diagnosis Method for Rolling Bearings Based on ITD and ICA[J].Journal of Vibration and Shock,2015,34 (14): 153-156.
[3]李晓晖,傅攀.基于EEMD的单通道盲源分离在轴承故障诊断中的应用[J].中国机械工程，2014,25(7):924-930.
LI Xiaohui, FU Pan. Application of Single-channel Blind Source Separation Based on EEMD in Bearing Fault Diagnosis[J].China Mechanical Engineering，2014, 25(7):924-930.
[4]韩捷,张瑞林.旋转机械故障机理及诊断技术[M].北京:机械工业出版社,1997:85-89.
HAN Jie, ZHANG Ruilin. Fault Mechanism and Diagnosis Technology of Rotating Machinery [M].Beijing: Machinery Industry Press, 1997:85-89.
[5]韩捷,石来德.全矢谱技术及工程应用[M].北京: 机械工业出版社, 2008:92-99.
HAN Jie, SHI Laide. Full Vector Spectrum Technology and Its Engineering Application [M].Beijing: Machinery Industry Press, 2008:92-99.
[6]胥永刚，陆明，谢志聪．基于固有时间尺度分解的能量算子解调法及故障诊断应用[J].海军工程大学学报，2013，25(1) :27-31.
XU Yonggang, LU Ming, XIE Zhicong. Teager Energy Operator Demodulation Method Based on ITD and Its Applications in Fault Diagnosis [J].Journal of Naval University of Engineering, 2013,25(1):27-31.
[7]李力.机械信号处理及其应用[M].武汉：华中科技大学出版社，2007:92-98.
LI Li. Mechanical Signal Processing and Its Application[M]. Wuhan:Huazhong University of Science and Technology Press, 2007:92-98.
[8]李志农,王心怡,张新广,等.基于全矢谱核函数主元分析的旋转机械故障诊断方法研究 [J].振动与冲击，2008，27(7):55-57.
LI Zhinong, WANG Xinyi, ZHANG Xinguang, et al. Fault Diagnosis of Rotating Machinery Based on Full Vector Spectrum Kernel Principal Component Analysis[J].Journal of Vibration and Shock,2008,27(7):55-57.
[9]韩捷，巩晓赟，陈宏.全矢谱技术在齿轮故障诊断中的应用[J].中国工程机械学报，2010,8(1):81-85.
HAN Jie, GONG Xiaoyun, CHEN Hong. Application of Full Vector Spectrum Technology in Gear Fault Diagnosis[J].Chinese Journal of Construction Machinery,2010,8(1):81-85.
[10]韩捷,王宏超,陈宏,等.滚动轴承故障的全矢小波分析[J].轴承，2011(3):45-47.
HAN Jie, WANG Hongchao, CHEN Hong, et al. Full Vector Wavelet Analysis of Rolling Bearing Fault[J].Bearing，2011(3):45-47.
[11]卞家磊，朱春梅，蒋章雷，等.LMD-ICA联合降噪方法在滚动轴承故障诊断中的应用[J] 中国机械工程，2016,27(7):904-910.
BIAN Jialei, ZHU Chunmei, JIANG Zhanglei, et al.Application of LMD-ICA to Fault Diagnosis of Rolling Bearings[J]. China Mechanical Engineering, 2016,27(7):904-910.
[12]VOKELJ M, ZUPAN S, PREBIL I. Multivariate and Multiscale Monitoring of Large-size Low-speed Bearings Using Ensemble Empirical Mode Decomposition Method Combined with Principal Component Analysis[J]. Mechanical Systems & Signal Processing, 2010, 24(4):1049-1067.

[1]	张西宁, 赵明, 温广瑞. 一种轴系全息动平衡配重的多目标优化方法 [J]. J4, 201016, 21(16): 1974-1977.
[2]	孙冬野, 胡丰宾, 秦大同, 刘振军. 湿式多片制动器热应力分布规律试验分析 [J]. J4, 201016, 21(16): 2006-2010.
[3]	吴雅朋;王吉芳;徐小力;蒋章雷. 基于小波分析的FastICA联合降噪方法在滚动轴承故障诊断中的应用研究[J]. 中国机械工程, 2017, 28(18): 2183-2188,2197.
[4]	张建宇, 孟浩, 胥永刚. 基于信源估计和频域反卷积的滚动轴承故障特征分离与辨识[J]. 中国机械工程, 2017, 28(01): 45-51.
[5]	符纯明, 姜, 潮, 陈光宋, 吉磊. 基于隔代映射算子的差分进化算法[J]. 中国机械工程, 2016, 27(11): 1523-1529,1545.
[6]	卞家磊, 朱春梅, 蒋章雷, 吕俊燕. LMD-ICA联合降噪方法在滚动轴承故障诊断中的应用[J]. 中国机械工程, 2016, 27(07): 904-910.
[7]	陈海, 曹毅, 秦友蕾. 无耦合完全各向同性1T1R并联机器人机构构型综合[J]. 中国机械工程, 2016, 27(05): 589-595.
[8]	孟宗, 马钊, 刘东, 李晶. 基于小波半软阈值消噪的盲源分离方法[J]. 中国机械工程, 2016, 27(03): 337-342.
[9]	杨宇, 李永国, 何知义, 程军圣. 基于LCD的齿轮箱混合故障盲源分离研究[J]. 中国机械工程, 2015, 26(8): 1062-1066.
[10]	毋文峰, 李浩, 朱露. 基于奇异值融合的机械设备盲信息提取[J]. 中国机械工程, 2015, 26(22): 3028-3033.
[11]	孟宗, 王晓燕, 马钊. 融合小波分解与时频分析的单通道振动信号盲分离方法[J]. 中国机械工程, 2015, 26(20): 2751-2756.
[12]	杨宇, 何知义, 李紫珠, 程军圣. ASTFA-BSS方法及其在齿轮箱复合故障诊断中的应用[J]. 中国机械工程, 2015, 26(15): 2051-2055,2061.
[13]	何伟铭, 封左伟, 宋小奇, 贾江森, 甘屹, 朱坚民. 逐次二角法在路面断面形状测量领域的应用[J]. 中国机械工程, 2015, 26(13): 1767-1771.
[14]	李晓晖;傅攀. 基于EEMD的单通道盲源分离在轴承故障诊断中的应用[J]. 中国机械工程, 2014, 25(7): 924-930.
[15]	李仕华, 句彦儒, 马琦翔, 李富娟. 新型3-RRRRR并联微动平台的位置及误差分析[J]. 中国机械工程, 2014, 25(23): 3142-3146.