垃圾压缩站箱体结构的荷载分析及轻量化设计

摘要/Abstract

摘要： 通过对垃圾压缩站箱体进行应力-应变测试，获得了箱体在工作过程中的荷载分布形式。采用Hyperstudy对曲线进行拟合筛选，得到与试验结果最匹配的荷载分布函数，并作为箱体优化分析的边界条件。同时引入超单元技术对模型进行简化处理，使得模型的优化效率得到了大幅度提高。传统优化算法与超单元算法的对比验证了采用超单元技术处理复杂模型的有效性。

关键词: 垃圾压缩站, 荷载分布, 超单元, 拓扑优化, 轻量化设计

Abstract: This paper presented the load distribution of the garbage compression station boxes by the stress-strain tests. The commercial software Hyperstudy was used to simulate the load distribution functions, and the functions which best matched with the experimental results were utilized as the boundary conditions of optimization. Simultaneously, the super element (SE) algorithm was introduced herein to reduce the complex structures, which might greatly improve the computational efficiency. Finally, the effectiveness of SE technology was validated by comparisons of traditional method and SE one.

Key words: garbage compression station, load distribution, super element, topology optimization, lightweight design

中图分类号:

TH218

李昂;刘初升. 垃圾压缩站箱体结构的荷载分析及轻量化设计[J]. 中国机械工程.

LI Ang;LIU Chusheng. Load Analysis and Lightweight Design of Garbage Compression Stations[J]. China Mechanical Engineering.

参考文献

[1]李响，游敏，李刚炎，等. 压缩垃圾站箱体结构有限元仿真研究[J]. 三峡大学学报，2012,34(1):61-64.
LI Xiang, YOU Min, LI Gangyan, et al. Finite Element Simulation of Compression Garbage Station’s Box[J]. Journal of China Three Gorges University,2012,34(1):61-64

[2]彭旋，唐华平. 基于郑肯-张本构的后装压缩式垃圾车车厢有限元分析[J]. 机械研究与应用，2015,28(3):16-20.
PENG Xuan, TANG Huaping. Finite Element Analysis of Rear-Loaded Garbage Compression Cart Based on Duncan-Chang Constitutive Model [J]. Mechanical Research & Application,2015,28(3):16-20.

[3]陈树勋，王素暖. 压缩垃圾车结构的荷载描述与优化设计[J]. 机械工程学报，2008,44(3)：213-219.
CHEN Shuxun, WANG Sunuan. Load Expression and Structural Optimization of Compressed Rubbish Vehicle[J]. Chinese Journal of Mechanical Engineering,2008,44(3):213-219.

[4]FRANK N, WIM D. Super-element Global Modal Parameterization for Efficient Inclusion of Highly Nonlinear Components in Multibody Simulation [J]. Multibody Syst. Dyn.,2014,31:3-25.

[5]姚兴佳, 杨立东，单光坤. 超单元法在轮毂有限元分析中的应用[J]. 沈阳工业大学学报,2011,33(1):31-35.
YAO Xingjia, YANG Lidong, SHAN Guangkun. Application of Super-element Method in Finite Element Analysis of Hub [J]. Journal of Shenyang University of Technology,2011,33(1):31-35.

[6]马洪亮，贾海涛，刘伟，等. 超单元应用中的关键问题研究[J]. 计算机仿真,2009,5(5):48-51.
MA Hongliang, JIA Haitao, LIU Wei, et al. A Study of the Key Problem in the Application of Superelement [J]. Computer Simulation,2009,5(5):48-51.

[7]贾海涛，马洪亮，吴清文，等. 超单元在大型复杂航天相机结构中的应用[J]. 软件时空，2009，25(8):161-163.
JIA Haitao, MA Hongliang, WU Qingwen, et al. The Application of Super-elements in the Large and Complex Structures of Space Camera [J]. Software Space,2009，25(8):161-163.

[8]JANG G W, YOON M S, PARK J H. Lightweight Flatbed Trailer Design by Using Topology and Thickness Optimization [J]. Structural and Multidisciplinary Optimization,2010,41(7):295-307.

[9]LI Chao, KIM I Y, JACK J. Conceptual and Detailed Design of an Automotive Engine Cradle by Using Topology, Shape, and Size Optimization [J]. Structural and Multidisciplinary Optimization,2015,51(3):547-564.

[10]ZHAO Xinhao, LIU Yanxiong, HUA Lin, et al. Finite Element Analysis and Topology Optimization of a 12000kN Fine Blanking Press Frame [J]. Structural and Multidisciplinary Optimization,2016,54:375-389.

[1]	赵清海1,2;张洪信2;蒋荣超2;华青松1,2;袁林2. 考虑拓扑相关热载荷的散热结构多相材料拓扑优化设计[J]. 中国机械工程, 2020, 31(20): 2403-2411.
[2]	王冠1；张骞2；寇琳媛1；刘志文3；李世康3. 基于混合元胞自动机算法的连续体结构非线性拓扑优化[J]. 中国机械工程, 2020, 31(18): 2161-2173.
[3]	陈涛1;李宁宁1;李卓1;李奇奇1;陈少伟1;张茜2. 侧面柱碰撞条件下电动汽车电池系统结构优化[J]. 中国机械工程, 2020, 31(09): 1021-1030.
[4]	钟浩龙;张小龙;刘子建. 薄壁梁结构的电动汽车车身刚度正向设计方法[J]. 中国机械工程, 2020, 31(08): 975-982.
[5]	李宇鹏1,2；巴春来1；刘来超3. 采用结构仿生的重型机床立柱的综合优化[J]. 中国机械工程, 2019, 30(13): 1621-1625,1637.
[6]	邹坤;侯亮;卜祥建;方奕凯. 基于工况风险评估的叉车门架多工况拓扑优化[J]. 中国机械工程, 2019, 30(05): 568-577.
[7]	贺红林;夏自强;袁维东. 基于改进优化准则法的自由阻尼结构动力学拓扑优化[J]. 中国机械工程, 2018, 29(13): 1531-1539.
[8]	刘念斯;蔡永周;顾纪超;郑颢. 设计空间差别处理优化方法及其在汽车轻量化设计中的应用[J]. 中国机械工程, 2018, 29(05): 597-601,622.
[9]	许小奎;郭宝峰;金淼. 基于对比度增强抑制灰度的改进优化准则法[J]. 中国机械工程, 2017, 28(24): 2944-2948,2956.
[10]	梁明轩1,2,3;李正刚2;唐任仲1;陈立2;黄川2. 基于柔性多体动力学的机械臂结构优化设计[J]. 中国机械工程, 2017, 28(21): 2562-2566.
[11]	房伟1;全书海1;谭保华2,3;冉斌4;王力1;焦亚田1. 汽车尾气热电转换装置电气拓扑结构优化[J]. 中国机械工程, 2017, 28(21): 2620-2626.
[12]	李昂;刘初升. 基于超单元技术的大型复杂结构的拓扑优化设计[J]. 中国机械工程, 2017, 28(20): 2467-2474.
[13]	杨江林1;张诗阳2. 基于非线性拓扑优化的汽车变厚度保险杠耐撞性设计[J]. 中国机械工程, 2017, 28(17): 2109-2114.
[14]	宁晓斌1;刘亚冉1;李颉2;李光3;李佳林3. 基于拓扑优化方法的大型液压挖掘机斗杆新型结构[J]. 中国机械工程, 2017, 28(16): 1936-1942.
[15]	许小奎, 郭宝峰, 金淼. 基于密度体积插值方法的结构拓扑优化[J]. 中国机械工程, 2017, 28(11): 1269-1273.