宋保江1,2;阎绍泽1,2
出版日期:
2017-07-10
发布日期:
2017-07-10
基金资助:
SONG Baojiang1,2;YAN Shaoze1,2
Online:
2017-07-10
Published:
2017-07-10
Supported by:
摘要:
中图分类号:
宋保江1,2;阎绍泽1,2. 界面黏滑摩擦现象的研究进展[J]. 中国机械工程.
SONG Baojiang1,2;YAN Shaoze1,2 . Research Progresses on Interfacial Stick-slip Frictions[J]. China Mechanical Engineering.
[1]李伟达, 李娟, 胡海燕, 等. 一种基于黏滑运动原理的微小型机器人建模与实验[J]. 机器人,2012,34(2):182-189. LI Weida, LI Juan, HU Haiyan, et al. Modeling and Experiment of a Micro Robot Based on Stick-slip Motion Principle[J]. Robot,2012,34(2):182-189. [2]钟博文, 王振华, 陈立国, 等. 基于黏滑驱动跨尺度精密定位技术的研究现状[J]. 压电与声光,2011,33(3):479-485. ZHONG Bowen, WANG Zhenhua, CHEN Liguo, et al. Current Development of Trans-scale Precision Positioning Technology Based on the Stick-slip Effect[J]. Piezoelectrics & Acoustooptics,2011,33(3):479-485. [3]KO P L, BROCKLEY C A. The Measurement of Friction and Friction-induced Vibration[J]. Journal of Tribology,1970,92(4):543-549. [4]KATO S, YAMAGUCHI K, MATSUBAYASHI T. Stick-slip Motion of Machine Tool Slideway[J]. Journal of Manufacturing Science and Engineering,1974,96(2):557-566. [5]RABINOWICZ E. The Intrinsic Variables Affecting the Stick-slip Process[J]. Proceedings of the Physical Society,1958,71(4):668-675. [6]RABINOWICZ E. The Nature of the Static and Kinetic Coefficients of Friction[J]. Journal of Applied Physics,1951,22(11):1373-1379. [7]RABINOWICZ E. Autocorrelation Analysis of the Sliding Process[J]. Journal of Applied Physics,1956,27(2):131-135. [8]RABINOWICZ E. Stick and Slip[J]. Scientific American,1956,194:109-119. [9]ARMSTRONG-HELOUVRY B. Control of Machines with Friction[M]. Amsterdam: Kluwer Academic Pub.,1991:24-26. [10]ARMSTRONG-HELOUVRY B. Stick-slip Arising from Stribeck Friction[C]//Robotics and Automation, IEEE International Conference on. Cincinna-ti: IEEE,1990:1377-1382. [11]JOHANNES V I, GREEN M A, BROCKLEY C A. The Role of the Rate of Application of the Tangential Force in Determining the Static Friction Coefficient[J]. Wear,1973,24(3):381-385. [12]BELL R, BURDEKIN M.A Study of the Stick-slip Motion of Machine Tool Feed Drives[J]. Proceedings of the Institution of Mechanical Engineers,1969,184(1):543-560. [13]HESS D P, SOOM A. Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities[J]. Journal of Tribology, 1990,112(1):147-152. [14]MATE C M, MCCLELLAND G M, ERLANDSSON R, et al. Atomic-scale Friction of a Tungsten Tip on a Graphite Surface[J]. Physical Review Letters,1987,59(17):1942. [15]GERMANN G J, COHEN S R, NEUBAUER G, et al. Atomic Scale Friction of a Diamond Tip on Diamond (100) and (111) Surfaces[J]. Journal of Applied Physics,1993,73(1):163-167. [16]TAKANO H, FUJIHIRA M. Study of Molecular Scale Friction on Stearic Acid Crystals by Friction Force Microscopy[J]. Journal of Vacuum Science & Technology B,1996,14(2):1272-1275. [17]CARPICK R W, SALMERON M. Scratching the Surface: Fundamental Investigations of Tribology with Atomic Force Microscopy[J]. Chemical Reviews,1997,97(4):1163-1194. [18]温诗铸, 黄平. 摩擦学原理[M]. 北京: 清华大学出版社,2002:412-441. WEN Shizhu, HUANG Ping. Principles of Tribology[M]. Beijing: Tsinghua University Press,2002:412-441. [19]SHIMIZU J, EDA H, YORITSUNE M, et al. Molecular Dynamics Simulation of Friction on the Atomic Scale[J]. Nanotechnology,1998,9(2):118-125. [20]LI Q, DONG Y, PEREZ D, et al. Speed Dependence of Atomic Stick-slip Friction in Optimally Matched Experiments and Molecular Dynamics Simulations[J]. Physical Review Letters, 2011,106(12):126101. [21]LI Y M, DU S R, YUN Y. Nanomanipulation Based on AFM: Probe Cantilever and Interactive Forces Modeling[C]// Asia-pacific Conference on Transducers and Micro-nano Technology(APCO-T08). Taibei, 2008:42-45. [22]TANG H, LI Y, ZHAO X. Hysteresis Modeling and Inverse Feedforward Control of an AFM Piezoelectric Scanner Based on Nano Images[C]//2011 IEEE International Conference on Mechatronics and Automation. Beijing, 2011:189-194. [23]KRIM J, SOLINA D H, CHIARELLO R. Nanotribology of a Krmonolayer: a Quartz-crystal Microbalance Study of Atomic-scale Friction[J]. Physical Review Letters, 1991,66(2):181-184. [24]KRIM J. Friction at the Atomic Scale[J]. Scientific American, 1996,275(4):74-80. [25]HIRANO M, SHINJO K, KANEKO R, et al. Observation of Superlubricity by Scanning Tunneling Microscopy[J]. Physical Review Letters, 1997,78(8):1448. [26]DIENWIEBEL M, VERHOEVEN G S, PRAD-EEP N, et al. Superlubricity of Graphite[J]. Physical Review Letters, 2004,92(12):126101. [27]SOCOLIUC A, BENNEWITZ R, GNECCO E, et al. Transition from Stick-slip to Continuous Sliding in Atomic Friction: Entering a New Regime of Ultralow Friction[J]. Physical Review Letters, 2004,92(13):134301. [28]ERLANDSSON R, HADZIIOANNOU G, MATE C M, et al. Atomic Scale Friction between the Muscovite Mica Cleavage Plane and a Tungsten Tip[J]. The Journal of Chemical Physics, 1988,89(8):5190-5193. [29]BHUSHAN B, KULKARNI A V. Effect of Normal Load on Microscale Friction Measurements[J]. Thin Solid Films, 1996,278(1):49-56. [30]BISTAC S, SCHMITT M, GHORBAL A, et al. Nano-scale Friction of Polystyrene in Air and in Vacuum[J]. Polymer, 2008,49(17):3780-3784. [31]GAO J, LUEDTKE W D, GOURDON D, et al. Frictional Forces and Amontons' Law: from the Molecular to the Macroscopic Scale[J]. The Journal of Physical Chemistry B, 2004,108(11):3410-3425. [32]HARRISON J A, WHITE C T, COLTONR J, et al. Molecular-dynamics Simulations of Atomic-scale Friction of Diamond Surfaces[J]. Physical Review B, 1992,46(15):9700. [33]ZHAO X, HAMILTON M, SAWYER W G, et al. Thermally Activated Friction[J]. Tribology Letters,2007,27(1):113-117. [34]JANSEN L, HOLSCHER H, FUCHS H, et al. Temperature Dependence of Atomic-scale Stick-slip Friction[J]. Physical Review Letters,2010,104(25):256101. [35]ISRAELACHVILI J N, MCGUIGGAN P M, HOMOLA A M. Dynamic Properties of Molecularly Thin Liquid Films[J]. Science, 1988,240(4849):189-191. [36]HOM R G, ISRAELACHVILI J N. Direct Measurement of Structural Forces between Two Surfaces in a Nonpolar Liquid[J]. The Journal of Chemical Physics,1981,75(3):1400-1411. [37]YOSHIZAWA H, ISRAELACHVILI J. Fundamental Mechanisms of Interfacial Friction. 2. Stick-slip Friction of Spherical and Chain Molecules[J]. The Journal of Physical Chemistry,1993,97(43):11300-11313. [38]THOMPSON P A, ROBBINS M O. Origin of Stick-slip Motion in Boundary Lubrication[J]. Science,1990,250(4982):792-794. [39]温诗铸. 纳米摩擦学[M]. 北京: 清华大学出版社,1998. WEN Shizhu. Nano Tribology[M]. Beijing: Tsinghua University Press,1998. [40]雒建斌, 张朝辉, 温诗铸. 薄膜润滑研究的回顾与展望[J]. 中国工程科学,2003,5(7):84-89. LUO Jianbin, ZHANG Chaohui, WEN Shizhu. Retrospectand Prospect of Study on Thin Film Lubrication[J]. Engineering Sciences,2003,5(7):84-89. [41]RABINOWICZ E, TANNER R I. Friction and Wear of Materials[J]. Journal of Applied Mechanics,1995,33(2):606-611. [42]BERMAN A D, DUCKER W A, ISRAELACHVILI J N. Origin and Characterization of Different Stick-slip Friction Mechanisms[J]. Langmuir,1996,12(19):4559-4563. [43]MATE C M, MCCLELLAND G M, ERLANDSSON R, et al. Atomic-scale Friction of a Tungsten Tip on a Graphite Surface[M]// Springer Netherlands: Scanning Tunneling Microscopy,1993:226-229. [44]DIETERICH J H. Time-dependent Friction and the Mechanics of Stick-slip[J]. Pure and Applied Geophysics,1978,116(4/5):790-806. [45]YOSHIZAWA H, CHEN Y L, ISRAELACHVILI J. Fundamental Mechanisms of Interfacial Friction 1 Relation between Adhesion and Friction[J]. The Journal of Physical Chemistry,1993,97(16):4128-4140. [46]HEYMANN F, RABINOWICZ E, RIGHTMIRE B G. Friction Apparatus for Very Low-speed Sliding Studies[J]. Review of Scientific Instruments,1955,26(1):56-58. [47]DAHL P R. A Solid Friction Model[R]. EI Segundo: Aerospace Corp. Ca.,1968. [48]DAHL P R. Solid Friction Damping of Spacecraft Oscillations[R]. EI Segundo: Aerospace Corp. EI Segundo Calif. Guidance and Control Div.,1975. [49]DAHL P R. Solid Friction Damping of Mechanical Vibrations[J]. AIAA Journal,1976,14(12):1675-1682. [50]HESLOT F, BAUMBERGER T, PERRIN B,et al. Creep, Stick-slip, and Dry-friction Dynamics: Experiments and a Heuristic Model[J]. Physical Review E,1994,49(6):4973. [51]NASUNO S, KUDROLLI A, BAK A, et al. Time-resolved Studies of Stick-slip Friction in Sheared Granular Layers[J]. Physical Review E,1998,58(2):2161. [52]YANG Z, ZHANG H P, MARDER M. Dynamics of Static Friction between Steel and Silicon[J]. Proceedings of the National Academy of Sciences,2008,105(36):13264-13268. [53]EGUCHI M, SHIBAMIVA T, YAMAMOTO T. Measurement of Real Contact Area and Analysis of Stick/Slip Region[J]. Tribology International,2009,42(11):1781-1791. [54]TUONOEN A J. Digital Image Correlation to Analyse Stick-slip Behaviour of Tyre Tread Block[J]. Tribology International,2014,69:70-76. [55]SONG BaoJiang, YAN Shaoze, XIANG Wuweikai. A Measurement Method for Distinguishing the Real Contact Area of Rough Surfaces of Transparent Solids Using Improved Otsu Technique[J]. Chinese Physics B,2015,24(1):014601. [56]ZHAO Jieliang, YAN Shaoze, WU Jianing. Analysis of Parameter Sensitivity of Space Manipulator with Harmonic Drive Based on the Revised Response Surface Method[J]. Acta Astronautica,2014,98:86-96. [57]YANG Tianfu, YAN Shaoze, HAN Z. Nonlinear Model of Space Manipulator Joint Considering Time-variant Stiffness and Backlash[J]. Journal of Sound and Vibration,2015,341:246-259. [58]KATO S, SATO N, MATSUBAYASHI T. Some Considerations on Characteristics of Static Friction of Machine Tool Slideway[J]. Journal of Tribology,1972,94(3):234-247. [59]KATO S, MATSUBAYASHI T. On the Dynamic Behavior of Machine Tool Slideway: 1st Report, Characteristics of Static Friction in “Stick Slip” Motion[J]. Bulletin of JSME,1970,13(55):170-179. [60]YOON S W, SHIN M W, LEE W G, et al. Effect of Surface Contact Conditions on the Stick-slip Behavior of Brake Friction Material[J]. Wear,2012,294:305-312. [61]BERGANDER A, BREGUET J M, SCHMITT C, et al. Micropositioners for Microscopy Applications Based on the Stick-slip Effect[C]// International Symposium on Micromechatronics and Human Science. Nagoya, 2000:213-216. [62]BRACE W F, BYERLEE J D.Stick-slip as a Mechanism for Earthquakes[J]. Science,1966,153(3739):990-992. [63]BYERLEE J D.Theory of Friction Based on Brittle Fracture[J]. Journal of Applied Physics,1967,38(7):2928-2934. [64]BYERLEE J. Friction of Rocks[J]. Pure and Applied Geophysics,1978,116(4/5):615-626. [65]DIETERICH J H. Constitutive Properties of Faults with Simulated Gouge. Mechanical Behavior of Crustal Rocks: the Handin Volume[M]. Washington D C:American Geophysical Union,1981:103-120. [66]STESKY R M. Rock Friction-effect of Confining Pressure, Temperature, and Pore Pressure[J]. Pure and Applied Geophysics,1978,116(4/5):690-704. [67]BEN-DAVID O, COHEN G, FINEBERG J. The Dynamics of the Onset of Frictional Slip[J]. Science,2010,330(6001):211-214. [68]BEN-DAVID O, RUBINSTEIN S M, FINEBERG J. Slip-stick and the Evolution of Frictional Strength[J]. Nature,2010,463(7277):76-79. [69]李普春, 刘力强, 郭玲莉, 等. 黏滑过程中的多点错动[J]. 地震地质,2013,35(1):125-137. LI Puchun, LIU Liqiang, GUO Lingli, et al. Multi-point Dislocation in Stick-Slip Process[J]. Seismology and Geology,2013,35(1):125-137. [70]KENDRICK J E, LAVALLEE Y, HIROSE T, et al. Volcanic Drumbeat Seismicity Caused by Stick-slip Motion and Magmatic Frictional Melting[J]. Nature Geoscience,2014,7(6):438-442. |
[1] | 吕伟, 郭伏, 刘莉, 张泽宇, 王天博. 行人与自动驾驶汽车的交互研究[J]. 中国机械工程, 2023, 34(05): 515-523. |
[2] | 刘俭辉, 赵贺, 冉勇, 李斌. 基于临界面理论的多轴等效应变疲劳寿命预估模型[J]. 中国机械工程, 2022, 33(15): 1821-1827. |
[3] | 沈明学, 李圣鑫, 余梦, 皇甫立志, 容彬, 熊光耀. 高寒地区列车遭遇暖湿气流后轮轨界面黏着与车轮损伤响应行为研究[J]. 中国机械工程, 2022, 33(12): 1504-1511. |
[4] | 李欢, 黄朝望, 周亢, 张长鑫, 曾才有. 铝/钢大功率超声波焊接过程模拟与试验验证[J]. 中国机械工程, 2022, 33(02): 226-233. |
[5] | 曹同坤, 徐英涛, 谈庆瑶. 在刀-屑界面持续润滑刀具切削45钢的性能及润滑机理[J]. 中国机械工程, 2021, 32(20): 2411-2417,. |
[6] | 郝兆朋, 韩雪, 范依航. 碳化硅增韧氧化铝基陶瓷刀具切削Inconel718合金的刀具界面行为研究#br#[J]. 中国机械工程, 2021, 32(09): 1009-1016. |
[7] | 刘俭辉1;吕鑫1;韦尧兵1;程金辉2. 考虑附加强化效应及平均应变的多轴疲劳寿命预估[J]. 中国机械工程, 2020, 31(03): 314-320. |
[8] | 常可可, 王立平, 薛群基. [学科发展]极端工况下机械表面界面损伤与防护研究进展[J]. 中国机械工程, 2020, 31(02): 206-220. |
[9] | 倪敬1,2;史雨1,2;蒙臻1,2;黄浩锋1. 单回路保护阀密封圈表界面黏附特性[J]. 中国机械工程, 2019, 30(24): 2899-2905. |
[10] | 方金祥1;王玉江2;董世运2;徐滨士2;闫世兴2;宋超群2,3舒凤远3;何鹏3. 激光熔覆Inconel718合金涂层与基体界面的组织及力学性能[J]. 中国机械工程, 2019, 30(17): 2108-2113. |
[11] | 季策1,2;黄华贵1,2;孙静娜1,2;刘文文1,2. 层状金属复合板带铸轧复合技术研究进展[J]. 中国机械工程, 2019, 30(15): 1873-1881. |
[12] | 李艳威;王效岗;李玉贵;韩培盛. 包覆对称组坯热轧制备高铬铸铁/低碳钢耐磨复合板[J]. 中国机械工程, 2018, 29(11): 1364-1368,1374. |
[13] | 孙建亮1;彭艳1;谷尚武2;杜兴明1. 界面特性对特厚板坯复合轧制复合效果的影响[J]. 中国机械工程, 2017, 28(20): 2508-2513. |
[14] | 王尧, 项丹, 孟文俊, . ZChSnSb11-6/20钢复合材料不同结合界面结合强度仿真与试验[J]. 中国机械工程, 2017, 28(01): 101-106,112. |
[15] | 刘丽丽, 轩福贞. 拉伸载荷下304L/533B爆炸复合板界面损伤的原位观察[J]. 中国机械工程, 2016, 27(23): 3235-3240. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||